EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Luminosity white Color LED 59-14 UWD/TR8 Features Super luminosity white LED. Built in 4 LED chips. Wide viewing angle. Soldering methods: Reflow soldering. High performance. Package in 12mm tape on 7diameter reel. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 59-14 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Lighting for small size device. Device Selection Guide Chip Lens Color Material Emitted Color InGaN White Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date: 07-26-2005 Yellow diffused Rev. 2 Prepared by: Jeff Tsai Page: 1 of 10 EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Package Outline Dimensions 0.3 (2) (3) (4) (5) (6) (7) (8) 0.3 5.0 0.55 0.55 1.25 1.5 1.25 1.25 0.45 1.25 0.45 1.05 0.475 (1) (2) (3) (4) 1.05 0.475 1.0 0.75 3.5 5.0 0.75 (1) (5) (6) (7) (8) 1.0 0.45 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 2 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Operating Temperature Topr -25 ~ +80 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol 260 (for 5 second) Electrostatic Discharge (HBM) ESD 1000 V Power Dissipation Pd 111 mW Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @ 400ms) IFP 100 mA * The value are base d on the 1-die performance. Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity*1 Viewing Angle*1 Symbol Min. Typ. Max. 5.0 8.5 15.0 Forward Voltage*2 10.0 25.0 45.0 ----- 60 ----- 2.7 3.3 3.7 Forward Voltage*2 Reverse Current*2 IR deg 3.6 4.4 5.2 ----- ----- 50 IFP=100mA*2 (Duty 1/10 @ 400ms) IF=20mA*2 IF=20mA*2 V VF Condition IF=20mA*2 cd Iv 21/2 Unit IFP=100mA*2 (Duty 1/10 @ 400ms) A VR=5V*2 *1 When 4 LED dies are operated simultaneously. *2 For each die. Note: The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 3 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Color Ranks x 0.280 Rank A0 0.264 0.283 y 0.248 0.267 0.305 0.296 x 0.276 y 0.287 Rank B3 0.283 0.304 0.307 0.295 0.305 0.315 Rank B4 0.330 Rank B5 x 0.307 0.304 0.330 0.330 x 0.296 0.287 0.307 0.311 y 0.315 0.330 0.360 0.339 y 0.276 0.295 0.315 0.294 x 0.311 Rank B6 0.307 0.330 0.330 x 0.330 Rank C0 0.330 0.361 0.356 y 0.294 0.315 0.318 y 0.318 0.360 0.351 0.339 0.385 *The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). CIE Chromaticity Diagram Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 4 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 5 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 6 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Carrier Tape Dimensions: Taping Quantity: 800pcs (4) (3) (2) (1) (8) (7) (6) (5) (4) (3) (2) (1) (8) (7) (6) (5) Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 7 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 8 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 9 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai EVERLIGHT ELECTRONICS CO.,LTD. 59-14 UWD/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 10 of 10 Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai