ELG-150-C2100B - MEAN WELL ENTERPRISES

File Name:ELG-150-C-SPEC 2018-09-30

105~150W Constant Current Mode LED Driver ELG-150-C series

■Features ■Applications

■Model Encoding

- C700ELG - 150 A

Rated wattage

Series name

■Description

ELG-150-C series is a 150W LED AC/DC driver featuring the constant current mode and

high voltage output. ELG-150-C operates from 100~360VAC and offers models with different

rated current ranging between 500mA and 2100mA. Thanks to the high efficiency up to 92%,

with the fanless design, the entire series is able to operate for -40 ~+85 case temperature under℃℃

free air convection. The design of metal housing and IP67/IP65 ingress protection level allows

this series to fit both indoor and outdoor applications. ELG-150-C is equipped with various function

options, such as dimming methodologies, so as to provide the optimal design flexibility for LED

lighting system.

Constant Current mode output

Metal housing design with functional Ground

Built-in active PFC function

<0.5WNo load / Standby power consumption

IP67 / IP65 rating for indoor or outdoor installations

Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off); Smart timer dimming; DALI;

Auxiliary DC output

Typical lifetime>50000 hours

5 years warranty

LED street lighting

LED harbor lighting

LED bay lighting

LED greenhouse lighting

LED flood lighting

Type HL for use in Class I, Division 2

(Classified) location.hazardous

Function options

Type

Blank

IP Level

IP67

IP65

IP67

Io fixed.

Io adjustable through built-in potentiometer.

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)

Function Note

In Stock

110

IP67

IP65

(for DA-Type only)

SELV

(for ELG-150-C1400/1750/2100)

Rated output current (500/700/1050/1400/1750/2100mA)

IP67

DALI control technology.

Built-in Smart timer dimming function by user request.

Built-in Smart timer dimming and programmable function.

In Stock

By request

In Stock

BE IP67 3 in 1 dimming function and Auxiliary DC output

Input wiring type Blank:2-wire input for standard model

-{3Y:3-wire input for standard model

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for 700A,1050A,700DAonly)

Type HL

(except for BE-Type)

AB IP65 Io adjustable through built-in potentiometer &

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) In Stock

In Stock

105~150W Constant Current Mode LED Driver ELG-150-C series

SPECIFICATION

MODEL

RATED CURRENT

RATED

POWER

OUTPUT

CURRENT ADJ. RANGE

SET UP TIME Note.4

VOLTAGE RANGE Note.3

FREQUENCY RANGE

POWER FACTOR (Typ.)

EFFICIENCY (Typ.)

AC CURRENT(Typ.)

INPUT

INRUSH CURRENT(Typ.)

LEAKAGE CURRENT

SAFETY STANDARDS

EMC IMMUNITY

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVER TEMPERATURE

OVER VOLTAGE

1600ms/115VAC 500ms/230VAC

(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

<0.75mA / 277VAC

Compliance to EN55015,EN61000-3-2 Class C (@load 60%) ; EN61000-3-3≧;; GB17743 GB17625.1,

EAC TP TC 020; KC KN15 KN61547,

20 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 60 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

ENVIRONMENT

EMC EMISSION

SAFETY &

EMC

PROTECTION

Shut down o/p voltage, re-power on to recover

SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

CURRENT TOLERANCE

±5.0%

CONSTANT CURRENT REGION

Note.2

TOTAL HARMONIC DISTORTION

OPEN CIRCUIT VOLTAGE

(max.)

Adjustable for A/AB-Type only (via built-in potentiometer)

COLD START 65A(twidth= s measured at 50% Ipeak)/230VAC485 Per NEMA 410μ;

MAX. No. of PSUs on 16A

CIRCUIT BREAKER 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

Tcase=-40 ~ +90 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃

MAX. CASE TEMP. Tcase=+90℃

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level ( )surge immunity Line-Earth 6KV, Line-Line 4KV ,

EAC TP TC 020; KC KN15 KN61547,

UL8750 (except for BE-type), independent,(type”HL”) CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13

1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃

2. Please refer to "DRIVING METHODS OF LED MODULE". For DA-Type, Constant Current region is 60%~100% of maximum voltage

under rated power delivery.

3. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.℃

7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.

8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

9. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

CURRENT RIPPLE 5.0% max. @rated current

100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr

ELG-150-C700

107 ~ 214V

700mA

ELG-150-C1050

72 ~ 143V

1050mA

150 ~ 300V

ELG-150-C500

500mA

ELG-150-C1400

54 ~ 107V

1400mA

ELG-150-C1750

43 ~ 86V

1750mA

36 ~ 72V

2100mA

ELG-150-C2100

225V 151V

315V 115V 94V 80V

350 ~ 700mA 525 ~ 1050mA

250 ~ 500mA 700 ~ 1400mA 875 ~ 1750mA 1050 ~ 2100mA

92% 92%

92% 91% 91% 91%

1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC

230 ~ 265V 155 ~ 180V

320 ~ 360V 128 ~ 150V 96 ~ 106V 82 ~ 92V

2 *63*319 5.5 mm (L*W*H)

0.95Kg; 16pcs / 16.0kg / 0.77CUFT

EN62384; ,EAC TP TC 004,BIS IS15885(for 700A,1050A,700DA only),IP65 or IP67;GB19510.1,GB19510.14

approvedKC61347 1 KC61347 2 13-, --

PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load 50%/115VC; @load 60%/230VAC; @load 75%/277VAC)≧≧ ≧

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

AUXILIARY DC OUTPUT Nominal 15V(deviation 11.5~15.5V)@0.3A for BE-Type only

No load power consumption <0.5W for Blank / A / Dx / D2-Type

NO LOAD / STANDBY

POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA-Type

1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.5Khrs min. MIL-HDBK-217F (25 )℃

105W

105W 105W

105W 105W 105W

200VAC ~ 305VAC

100VAC ~ 180VAC

149.8W 150.15W

150W 149.8W 150.5W 151.2W

(For BE Type only)

(Except for BE Type)

(For All the Types)

134.4W

135W 133W

134.4W 133W 134.4W

CONSTANT CURRENT REGION

Note.2

(For BE Type only)

107 ~ 192V 72 ~ 128V

150 ~ 270V 54 ~ 95V 43 ~ 76V 36 ~ 64V

EFFICIENCY

(Typ.)(for BE Type only)

DALI STANDARDS

Compliance to IEC62386-101,102,207 for DA-Type only

90% 90%

90% 89% 89% 89%

File Name:ELG-150-C-SPEC 2018-09-30

105~150W Constant Current Mode LED Driver ELG-150-C series

BLOCK DIAGRAM

DETECTION

PWM & PFC CIRCUIT

O.L.P.O.T.P.

EMI FILTER

RECTIFIERS

POWER

SWITCHING

FILTER

RECTIFIERS Vo+

Vo-

I/P

CONTROL

O.V.P.

O.L.P.

PFC

CIRCUIT

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

DIM+

(B Type)

DIM-

DRIVING METHODS OF LED MODULE

※This series works in constant current mode to directly drive the LEDs.

Typical output current normalized by rated current (%)

In the constant current region, the highest voltage at the output of the driver

depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

100

(min.)

Vo(%)

50 100 Io(%)

Constant

Current area

Hiccup

Protection

◎This characteristic applies to Blank/A/B/AB/DX/D2/BE-Type,

For DA-Type, the Constant Current area is 60%~100% Vo.

CASE :Protective Earth

File Name:ELG-150-C-SPEC 2018-09-30

AC/L(Brown)

AC/N(Blue)

105~150W Constant Current Mode LED Driver ELG-150-C series

DIMMING OPERATION

ELG-150-C

※3 in 1 dimming function (for B/AB-Type)

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0 ~ 10VDC, or 10V PWM signal or resistance.

Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.

Dimming source current from power supply: 100 A (typ.)μ

◎Applying additive 0 ~ 10VDC

◎Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

◎Applying additive resistance:

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Voltage

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive PWM signal

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Resistance

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

Dimming input: Additive voltage

Duty cycle of additive 10V PWM signal dimming input

* DIM+ for B/AB-Type

DA+ for DA-Type

PROG+ for D2-Type

* *DIM- for B/AB-Type

DA- for DA-Type

PROG- for D2-Type

Short

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity for synchronized )dimming operation

Dimming input: Additive resistance

DIM-(Black)**

DIM+( )*Gray

Vo+(Brown)

Vo-(Blue)

File Name:ELG-150-C-SPEC 2018-09-30

105~150W Constant Current Mode LED Driver ELG-150-C series

※DAL Interface (primary side; for DA-Type)I

Apply DALI signal between DA+ and DA-.

DAL protocol comprises 16 groups and 64 addresses.I

First step is fixed at 8% of output.

※Smart timer dimming function (for Dxx-Type by User definition)

MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14

consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,

please contact MEAN WELL for details.

Ex : D01-Type: the profile recommended for residential lighting◎

Ex: D02-Type: the profile recommended for street lighting◎

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:

[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.

[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.

[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.

[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:

[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.

[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.

[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.

[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.

[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The

constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Set up for D01-Type in Smart timer dimming software program:

Set up for D02-Type in Smart timer dimming software program:

TIME**

06:00

01:00

T4 T5

07:00

03:00

11:00

8:00 11:00

---

LEVEL**

100% 70%

80%50%

50%

100%

70%

60% 80%

Dimming Level(%)

Operating Time(HH:MM)

Dimming Level(%)

Operating Time(HH:MM)

File Name:ELG-150-C-SPEC 2018-09-30

105~150W Constant Current Mode LED Driver ELG-150-C series

Ex: D03-Type: the profile recommended for tunnel lighting◎

Set up for D03-Type in Smart timer dimming software program:

TIME** 01:30

T1 T2 T3

11:00 ---

LEVEL** 70% 100% 70%

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:

[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.

[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.

[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Dimming Level(%)

Operating Time(HH:MM)

File Name:ELG-150-C-SPEC 2018-09-30

-25

LOAD

105~150W Constant Current Mode LED Driver ELG-150-C series

LOAD

OUTPUT LOAD vs TEMPERATURE(Note.7)

TOTAL HARMONIC DISTORTION (THD)

AMBIENT TEMPERATURE,Ta ( )℃

LOAD (%)

INPUT VOLTAGE (V) 60Hz

LOAD (%)

(HORIZONTAL)

POWER FACTOR (PF) CHARACTERISTIC

Tcase ( )℃

LOAD (%)

(HORIZONTAL)

※De-rating is needed under low input voltage.

EFFICIENCY vs LOAD

ELG-150-C series possess superior working efficiency that up to 92% can

be reached in field applications.

-40 -25 0 20 45 55 65 75 90

100

※500mA Model, Tcase at 75℃※500mA Model, Tcase at 75℃

EFFICIENCY(%)

THD

LOAD

※Tcase at 75℃

230VAC

input only

-40 -25 0-10 15 30 50 60 70

100

100 120 140 160 180 200 240 250 260 270 280 305

100

STATIC CHARACTERISTIC

230VAC

input only

for BE Type

50% 60% 70% 80% 90% 100%

277V(150W)

230V(150W)

115V(105W)

File Name:ELG-150-C-SPEC 2018-09-30

0.86

0.88

0.90

0.92

0.94

0.96

0.98

1.00

50% 60% 70% 80% 90% 100%

277V(150W)

230V(150W)

115V(105W)

10%

12%

14%

16%

18%

20%

22%

50% 60% 70% 80% 90% 100%

277VAC(150W)

230VAC(150W)

115VAC(105W)

LIFE TIME

Tc a s e )(℃

LIFETIME(Kh)

105~150W Constant Current Mode LED Driver ELG-150-C series

100

120

20 30 40 50 60 70 80 90

File Name:ELG-150-C-SPEC 2018-09-30

MECHANICAL SPECIFICATION

105~150W Constant Current Mode LED Driver ELG-150-C series

CASE NO.: 237A Unit:mm

※Blank-Type

: Max. Case Temperature

※A-Type(except for 1750mA, 2100mA models)

: Max. Case Temperature

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

105

4- 4.5ψ

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

50.5

16.5

105

4- 4.5ψ

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

Vo+(Brown)

Vo-(Blue)

File Name:ELG-150-C-SPEC 2018-09-30

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

105

※B DA/D2-Type/

※A-Type(for 1750mA, 2100mA models)

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

21.5

105

4- 4.5ψ

105~150W Constant Current Mode LED Driver ELG-150-C series

: Max. Case Temperature

* DIM+ for B-Type

DA+ for DA-Type

PROG+ for D2-Type

* *DIM- for B-Type

DA- for DA-Type

PROG- for D2-Type

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

Vo+(Brown)

Vo-(Blue)

DIM-(Black)**

DIM+( )*Gray

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

File Name:ELG-150-C-SPEC 2018-09-30

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

105

※AB-Type(except for 1750mA, 2100mA models)

21.5

4- 4.5ψ

105~150W Constant Current Mode LED Driver ELG-150-C series

: Max. Case Temperature

DIM-(Black)

DIM+( )Gray

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

File Name:ELG-150-C-SPEC 2018-09-30

208

219

195 300±20

300±20

45.8

35.5

AC/L(Brown)

AC/N(Blue)

105

※AB-Type(for 1750mA, 2100mA models)

4- 4.5ψ

: Max. Case Temperature

DIM-(Black)

DIM+( )Gray

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

50.5

16.5

208

219

195 200±20

300±20

45.8

35.5

105

4- 4.5ψ

Please refer to : http://www.meanwell.com/manual.html

105~150W Constant Current Mode LED Driver ELG-150-C series

INSTALLATION MANUAL

※BE-Type

: Max. Case Temperature

SJOW 17AWGx3C

&H05RN-F 1.0mm2

DIM-(Black)

DIM+( )Gray

AUX-(White)

AUX+( )Red

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx4C

&H05RN-F 1.0mm2

AC/L(Brown)

AC/N(Blue)

※3Y Model (3-wire input)

PE (Green/Yellow) tc

: Max. Case Temperature

208

219

195

300±20

45.8

105

4- 4.5ψ

SJOW 17AWGx3C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

◎Note1: Please connect the case to PE for the complete EMC deliverance and safety use.

◎Note2: Please contact MEAN WELL for input wiring option with PE.

AC/L(Brown)

AC/N(Blue)

FG (Green/Yellow)

File Name:ELG-150-C-SPEC 2018-09-30

300±20