19-5286; Rev 0; 6/10 TION KIT EVALUA BLE AVAILA Stereo, High-Power, Class D Amplifiers The MAX98400A/MAX98400B Class D amplifiers provide high-performance, thermally efficient amplifier solutions. The MAX98400A delivers 2x20W into 8I loads or 1x40W into a 4I load. The MAX98400B delivers 2x12W into 8I loads. An integrated limiting circuit prevents output clipping distortion, protects small speakers from transient voltages, and reduces power dissipation. A thermal-foldback feature can be enabled to automatically reduce the output power at above a junction temperature of +120NC. Traditional thermal protection is also available in addition to robust overcurrent protection. The ICs operate from a single 8V to 28V supply and provide a high 67dB PSRR, eliminating the need for a regulated power supply. They offer up to 90% efficiency from a 12V supply. Filterless modulation allows the ICs to pass EN55022B EMI limits with 1m cables using only a low-cost ferrite bead and small-value capacitor on each output. Both devices feature eight digitally controlled gain settings. Comprehensive click-and-pop reduction circuitry minimizes noise coming into and out of shutdown. The MAX98400A/MAX98400B are available in 36-pin and 24-pin TQFN packages, respectively, and are specified over the -40NC to +85NC temperature range. Features S Wide 8V to 28V Supply Voltage Range S Single-Supply Operation S Low EMI: Active Emissions Limiting S Clipping Limiter S Low Quiescent Current S Thermal Foldback S Thermal and Overcurrent Protection Applications LCD/PDP Televisions LCD Monitors MP3 Docking Stations Notebook PCs Ordering Information PART PIN-PACKAGE SPEC MAX98400AETX+ 36 TQFN-EP* 2x20W MAX98400BETG+ 24 TQFN-EP* 2x12W Note: Devices operate over the -40C to +85C temperature range. *EP = Exposed pad. Simplified Block Diagram INL- INL+ OUTLCLIPPING LIMITER PGA CLASS D MODULATOR AND H-BRIDGE OUTL+ MONO* MAX98400A/B INR- INR+ OUTRCLIPPING LIMITER PGA CLASS D MODULATOR AND H-BRIDGE OUTR+ *MAX98400A ONLY ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. MAX98400A/MAX98400B General Description MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Table of Contents Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Typical Operating Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Stereo Configuration for MAX98400A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Mono Configuration for MAX98400A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Detailed Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Click-and-Pop Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Mono Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Clipping Limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Limiter Threshold Control (LIM_TH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Release Time Control (RELEASE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Preamplifier Gain Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Thermal Foldback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Overtemperature Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Overcurrent Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Applications Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Filterless Class D Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Inductor-Based Output Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Component Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Input Capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Internal Regulator VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Supply Bypassing, Layout, and Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Chip Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Functional Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 2 Stereo, High-Power, Class D Amplifiers Figure 1. MAX98400B EMI Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 2. MAX98400A Efficiency vs. Class AB Effifciency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 3. Limiter Control, Mode3 Configuration (Table 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 4. Output Filter for PWM Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 List of Tables Table 1. Limiter Control Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Table 2. Gain Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Table 3. Filter Component Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3 MAX98400A/MAX98400B List of Figures MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Absolute Maximum Ratings PVDD to PGND.......................................................-0.3V to +30V VS to GND................................................................-0.3V to +6V SHDN, MONO to GND.............................................-0.3V to +6V IN_ to GND...............................................................-0.3V to +6V G1, G2, RELEASE, TEMPLOCK, LIM_TH to GND......................................... -0.3V to (VS + 0.3V) OUT_ to PGND.......................................-0.3V to (VPVDD + 0.3V) PGND to GND.......................................................-0.3V to +0.3V Continuous Current into OUT_........................................... +2.4A Continuous Current into PVDD, PGND.............................. +4.8A Continuous Current into All Other Pins............................ +10mA Duration of OUT_ Short Circuit to PVDD or PGND....Continuous Duration of Short Circuit Between OUT_+ and OUT_-..................................................Continuous Continuous Power Dissipation (TA = +70NC) 36-Pin TQFN Multilayer Board (derate 35.7mW/NC above +70NC)..........................2857.1mW BJA (Note 1)..............................................................28NC/W BJC (Note 1)................................................................1NC/W 24-Pin TQFN Multilayer Board (derate 27.8mW/NC above +70NC)..............................35.7mW BJA (Note 1)..............................................................36NC/W BJC (Note 1)................................................................3NC/W Junction Temperature......................................................+150NC Operating Temperature Range........................... -40NC to +85NC Storage Temperature Range............................. -65NC to +150NC Lead Temperature (soldering, 10s).................................+300NC Soldering Temperature (reflow).......................................+260NC Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics (VPVDD = 18V, CIN = 1FF, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CREL = 1FF, C1 = C2 = 1FF, RL = J, AC measurement bandwidth 20Hz to 20kHz, differential input signal, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 8 28 V 4.75 5.5 V AMPLIFIER DC CHARACTERISTICS PVDD Supply Voltage Range VS Supply Input Voltage VPVDD VS IPVDD Inferred from PVDD_PSRR Inferred from IVS test 10 15 6 8.2 Single-supply mode: TA = +25NC 16 23 RL = 8I (Note 3) 17 VSHDN = 0V, TA = +25NC, VS = 5.5V 8 3 7 20 10 7.9 4.47 4.75 V Differential Input Voltage Range 2 VRMS Single-Ended Input Voltage Range 1 VRMS Quiescent Current Single-Supply Quiescent Current Shutdown Current IVS IPVDD ISHDN_PVDD PVDD Undervoltage Lockout ISHDN_VS VUVLO VS Regulator Output Voltage VS Dual-supply mode: VS = 4.75V, TA = +25NC 4.2 mA mA FA V INPUT STAGE Common-Mode Rejection Ratio Input Resistance 4 CMRR Differential VLIM_TH = 0V, gain = +35dB 20 60 dB 32 kI Stereo, High-Power, Class D Amplifiers (VPVDD = 18V, CIN = 1FF, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CREL = 1FF, C1 = C2 = 1FF, RL = J, AC measurement bandwidth 20Hz to 20kHz, differential input signal, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 11 ms Q0.8 Q4 % Q2 % POWER STAGE Shutdown to Full Operation tSON Gain Accuracy Left-to-Right Gain Matching All gain settings Crosstalk Output Offset Voltage Click-and-Pop Level PVDD Power-Supply Rejection Ratio VOS KCP 1kHz -85 10kHz -68 TA = +25NC Peak voltage, 32 samples/s, A-weighted, TA = +25NC (Notes 4, 5) Q8 Into shutdown -47 Out of shutdown -56 VPVDD = 8V to 28V PSRRPVDD VS Power-Supply Rejection Ratio MAX98400A Output Power MAX98400B Output Power Total Harmonic Distortion Plus Noise Output Noise Efficiency Current Limit Output FET Resistance Switching Frequency Peak Output Voltage LIMITER Attack Time Release Time Maximum Trigger Level Minimum Trigger Level Trigger Level Compression Range 52 POUT POUT THD+N VN E mV 63 67 10kHz, 100mVP-P ripple PSRRVS Q45 dBV 1kHz, 100mVP-P ripple VS = 4.75V to 5.5V dB dB 57 39 55 1kHz, 100mVP-P ripple 50 10kHz, 100mVP-P ripple 40 Stereo, RL = 8I, 10% THD+N, fIN = 1kHz (Note 3) 22 Mono, RL = 4I, 10% THD+N, fIN = 1kHz (Note 3) 44 Stereo, RL = 8I, 10% THD+N, fIN = 1kHz (Note 3) 15 POUT = 0.1W to POUT/2, fIN = 20Hz to 20kHz, RL = 8I 0.3 POUT/2, fIN = 1kHz, RL = 8I 0.03 A-weighted 100 FVRMS POUT = 2x20W, RL = 8I (MAX98400A) fIN = 1kHz (Note 3) 90 % 5 0.4 330 26 A 3.5 ILIM RDSON fSW VPVDD = 28V VLIM_TH = 0V VLIM_TH = 0V VPVDD = 14V (Note 6) (Note 7) VLIM_TH = 0V VLIM_TH = 0V 265 20 240 0.8 dB W % 395 500 4 -1 -12 0 -6 +1 I kHz V Fs s dBFS dBFS dBFS dB 5 MAX98400A/MAX98400B Electrical Characteristics (continued) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Electrical Characteristics (continued) (VPVDD = 18V, CIN = 1FF, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CREL = 1FF, C1 = C2 = 1FF, RL = J, AC measurement bandwidth 20Hz to 20kHz, differential input signal, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Notes 2, 3) PARAMETER SYMBOL VGA Distortion CONDITIONS MIN Compression = 0 to -12dB LIM_TH Input-Voltage Low (PVDD Tracking) TYP MAX 3.5 % 0.15 V LIM_TH Input-Voltage High (Limiter Off) VS -1 Channel-to-Channel Attenuation Tracking UNITS V dB Q1 THERMAL FOLDBACK Internal Templock Resistor Trigger Temperature Hard Thermal Protection LOGIC INPUT (G1, G2) Sink Current Source Current TA = +25NC, VG1, VG2 = 0V TA = +25NC, VG1, VG2 = VS 120 205 +130 +165 +2.5 +5 +8 FA -8 -5 -2.5 FA 0.8 x VS V Input High Threshold Input Low Threshold 0.3 x VS Input Three-State Window 0.45 x VS LOGIC INPUT (SHDN, MONO (MAX98400A Only)) Input Leakage Current IIN TA = +25NC Input High Threshold VINH Input Low Threshold Input-Voltage Hysteresis 310 kI NC NC V 0.5 x VS 0.55 x VS Q10 2 VINL 0.4 100 V FA V V mV Note 2: 100% production tested at TA = +25NC. Specifications over temperature limits are guaranteed by design. Note 3: The MAX98400A stereo mode is specified with an 8I resistive load in series with a 68FH inductive load connected across BTL outputs. The MAX98400A mono mode is specified with a 4I resistive load in series with 33FH inductive load. The MAX98400B is specified with an 8I resistive load in series with a 68FH inductive load connected across BTL outputs. Note 4: Amplifier inputs AC-coupled to GND. Note 5: Mode transitions controlled by SHDN. Note 6: Relative to equivalent full-scale undistorted output. Full scale (FS) = VPVDD x 0.95. Note 7: Relative to equivalent full-scale undistorted output. Full scale (FS) = VPVDD. 6 Stereo, High-Power, Class D Amplifiers (MAX98400A, VPVDD = 18V, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CIN = CREL = C1 = C2 = 1FF, typical values are at TA = +25NC, unless otherwise noted.) POUT = 4W MAX98400 toc02 1 0.1 POUT = 0.5W THD+N (%) 0.1 THD+N (%) THD+N (%) 0.1 TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY 1 MAX98400 toc01 1 TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY POUT = 7W 0.01 MAX98400 toc03 TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY POUT = 10W 0.01 0.01 POUT = 1W 0.01 0.1 1 10 0.001 100 0.01 0.1 1 FREQUENCY (kHz) TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER f = 1kHz 0.01 VPVDD = 12V 8I LOAD f = 100Hz 2 0 4 6 8 10 MAX98400 toc05 0.1 f = 1kHz 12 4 0 0.01 0 2 4 8 12 16 20 24 VPVDD = 12V 4I LOAD 8 10 12 OUTPUT POWER (W) 8 0 16 80 14 16 32 40 48 EFFICIENCY vs. OUTPUT POWER 70 60 50 40 90 80 70 60 50 40 30 VPVDD = 12V, 8I LOAD, BOTH CHANNELS DRIVEN 10 18 24 100 MAX98400 toc08 90 VPVDD = 24V RL = 8I STOPS BEFORE 10% THD+N DUE TO THERMAL LIMITING OF THERMAL FOLDBACK FEATURE OUTPUT POWER (W) EFFICIENCY vs. OUTPUT POWER 100 20 6 f = 1kHz f = 100Hz 30 0.001 0.1 0.001 EFFICIENCY (%) f = 1kHz f = 100Hz f = 6kHz OUTPUT POWER (W) MAX98400 toc07 0.1 VPVDD = 18V 8I LOAD f = 100Hz EFFICIENCY (%) THD+N (%) 1 0.01 0.001 f = 6kHz 100 10 f = 6kHz TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER 1 10 TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER OUTPUT POWER (W) 10 1 TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER 0.01 0.001 0.1 FREQUENCY (kHz) THD+N (%) 0.1 0.01 FREQUENCY (kHz) 1 f = 6kHz THD+N (%) THD+N (%) 1 0.001 100 10 MAX98400 toc04 10 10 VPVDD = 18V 8I LOAD MAX98400 toc09 0.001 POUT = 1W VPVDD = 12V 4I LOAD MAX98400 toc06 VPVDD = 12V 8I LOAD 0 0 2 4 6 8 10 12 14 16 18 20 TOTAL OUTPUT POWER (W) 20 VPVDD = 18V, 8I LOAD, BOTH CHANNELS DRIVEN 10 0 0 5 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) 7 MAX98400A/MAX98400B Typical Operating Characteristics Typical Operating Characteristics (continued) (MAX98400A, VPVDD = 18V, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CIN = CREL = C1 = C2 = 1FF, typical values are at TA = +25NC, unless otherwise noted.) 50 40 30 60 50 40 30 20 VPVDD = 24V, 8I LOAD, BOTH CHANNELS DRIVEN 10 0 0 10 20 30 40 50 VPVDD = 12V, 4I LOAD, BOTH CHANNELS DRIVEN 10 0 60 0 TOTAL OUTPUT POWER (W) VPVDD = 12V 35 30 POUT (W) 10% THD+N 10 60 10% THD+N 1% THD+N 5 0 10 20 30 40 50 60 70 80 90 100 10 0 10 20 30 40 50 60 70 80 90 100 LOAD (I) 100mVP-P RIPPLE 0 -10 CROSSTALK vs. FREQUENCY -30 -40 -50 -60 1% THD+N 20 8I LOAD, POUT = 1W, f = 1kHz 0 CROSSTALK (dB) PSRR (dB) 10% THD+N 20 -20 -40 -60 -80 -70 -100 -80 0 0 20 15 -20 10 25 POWER-SUPPLY REJECTION RATIO 40 28 30 LOAD (I) 50 30 VPVDD = 18V 40 1% THD+N 0 MAX98400 toc16 VPVDD = 24V 24 10 OUTPUT POWER vs. LOAD 70 20 45 10% THD+N SUPPLY VOLTAGE (V) 80 16 OUTPUT POWER vs. LOAD 20 16 12 50 MAX98400 toc17 14 1% THD+N 35 0 0 12 20 8 5 10 10% THD+N 30 SUPPLY VOLTAGE (V) 25 10 8 40 0 15 1% THD+N 20 50 OUTPUT POWER vs. LOAD 40 30 60 40 POUT (W) 50 30 40 MAX98400 toc13 MAXIMUM OUTPUT POWER (W) 4I LOAD, BOTH CHANNELS ARE DRIVEN 20 70 TOTAL OUTPUT POWER (W) MAXIMUM OUTPUT POWER vs. SUPPLY VOLTAGE (WITH THERMAL SHUTDOWN) 60 10 80 10 MAX98400 toc14 20 8I LOAD, BOTH CHANNELS ARE DRIVEN 90 MAX98400 toc15 60 70 100 MAX98400 toc12 80 EFFICIENCY (%) 70 90 MAX98400 toc18 80 MAX98400 toc11 90 EFFICIENCY (%) 100 MAX98400 toc10 100 10 20 30 40 50 60 70 80 90 100 LOAD (I) 8 MAXIMUM OUTPUT POWER vs. SUPPLY VOLTAGE (WITH THERMAL SHUTDOWN) EFFICIENCY vs. OUTPUT POWER MAXIMUM OUTPUT POWER (W) EFFICIENCY vs. OUTPUT POWER POUT (W) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers 0.01 0.1 1 FREQUENCY (kHz) 10 100 0.01 0.1 1 FREQUENCY (kHz) 10 100 Stereo, High-Power, Class D Amplifiers (MAX98400A, VPVDD = 18V, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CIN = CREL = C1 = C2 = 1FF, typical values are at TA = +25NC, unless otherwise noted.) WIDEBAND OUTPUT SPECTRUM -40 -60 -80 SHDN 2V/div -40 -60 -80 OUTPUT 2V/div -100 -120 -120 20 0.1 1 10 100 FREQUENCY (kHz) FREQUENCY (MHz) SUPPLY CURRENT vs. PVDD SUPPLY VOLTAGE SUPPLY CURRENT vs. VS SUPPLY VOLTAGE 12 10 8 6 12 SUPPLY CURRENT (mA) IPVDD IVS 4 SHUTDOWN CURRENT vs. PVDD SUPPLY VOLTAGE 14 MAX98400 toc22 14 IPVDD 10 8 4ms/div IVS 6 4 14 12 8 6 4 12 16 20 24 VS = 5V 0 4.75 28 5.00 0 5.50 5.25 8 12 16 20 24 28 PVDD SUPPLY VOLTAGE (V) VS SUPPLY VOLTAGE (V) PVDD SUPPLY VOLTAGE (V) SHUTDOWN CURRENT vs. VS SUPPLY VOLTAGE MAXIMUM OUTPUT POWER vs. PVDD (NO THERMAL SHUTDOWN) TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY (MONO) 8 IPVDD_SHDN 6 4 IVS_SHDN 2 50 MAXIMUM POUT (W) 10 8I LOAD 5.00 5.25 0.1 30 4I LOAD 20 VS SUPPLY VOLTAGE (V) POUT = 1W 0.01 10 5.50 POUT = 8W 40 THERMAL FOLDBACK DISABLED, BOTH CHANNELS DRIVEN VPVDD = 18V 0 MAX98400 toc27 12 1 MAX98400 toc26 60 MAX98400 toc25 14 4.75 IVS_SHDN 2 VPVDD = 18V VS = 5V 0 8 IPVDD_SHDN 10 2 2 MAX98400 toc24 15 MAX98400 toc23 10 SHUTDOWN CURRENT (A) 5 0 SUPPLY CURRENT (mA) MAX98400 toc20 -20 -100 SHUTDOWN CURRENT (A) MAX98400 toc21 RBW = 100Hz THD+N (%) OUTPUT AMPLITUDE (dBV) -20 SHDN ON/OFF RESPONSE 0 OUTPUT AMPLITUDE (dBV) 8I LOAD MAX98400 toc19 INBAND OUTPUT SPECTRUM 0 0 8 12 16 20 24 PVDD SUPPLY VOLTAGE (V) 28 VPVDD = 12V 4I LOAD 0.001 0.01 0.1 1 10 100 FREQUENCY (kHz) 9 MAX98400A/MAX98400B Typical Operating Characteristics (continued) Typical Operating Characteristics (continued) (MAX98400A, VPVDD = 18V, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CIN = CREL = C1 = C2 = 1FF, typical values are at TA = +25NC, unless otherwise noted.) f = 1kHz 0.01 0.1 f = 1kHz 0.01 VPVDD = 12V, 4I LOAD 0 4 8 12 16 20 8 0 16 OUTPUT POWER (W) EFFICIENCY vs. OUTPUT POWER (MONO) 60 50 40 0.001 48 0 70 60 50 40 20 20 VPVDD = 12V, 4I LOAD 15 0 0 80 70 80 80 70 60 50 40 5 10 15 20 25 30 35 VPVDD = 24V, 4I LOAD 10 0 40 0 OUTPUT POWER vs. LOAD (MONO) 25 VPVDD = 12V 20 5 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) OUTPUT POWER vs. LOAD (MONO) 50 VPVDD = 18V 45 40 10% THD+N 35 1% THD+N 15 POUT (W) POUT (W) 60 40 60 90 TOTAL OUTPUT POWER (W) MAX98400 toc34 90 50 20 MAXIMUM OUTPUT POWER vs. PVDD (WITH THERMAL SHUTDOWN, MONO) 100 40 EFFICIENCY vs. OUTPUT POWER (MONO) VPVDD = 18V, 4I LOAD 10 20 30 30 TOTAL OUTPUT POWER (W) 50 20 100 MAX98400 toc32 80 30 70 10 OUTPUT POWER (W) 90 30 10 40 EFFICIENCY (%) 70 5 32 VPVDD = 24V, 4I LOAD f = 100Hz EFFICIENCY vs. OUTPUT POWER (MONO) EFFICIENCY (%) EFFICIENCY (%) 80 0 24 100 MAX98400 toc31 90 0 f = 1kHz OUTPUT POWER (W) 100 10 VPVDD = 18V, 4I LOAD f = 100Hz 0.001 24 0.1 MAX98400 toc33 0.001 f = 6kHz 0.01 MAX98400 toc35 f = 100Hz 10 30 30 25 20 15 20 10% THD+N 5 10 8 12 16 20 24 PVDD SUPPLY VOLTAGE (V) 28 0 0 10% THD+N 10 5 1% THD+N 4I LOAD, THERMAL FOLD DISABLED 0 10 1 f = 6kHz THD+N (%) THD+N (%) 0.1 MAX98400 toc30 1 f = 6kHz 10 MAX98400 toc29 1 THD+N (%) 10 MAX98400 toc28 10 TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER (MONO) TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER (MONO) MAX98400 toc36 TOTAL HARMONIC DISTORTION PLUS NOISE vs. OUTPUT POWER (MONO) MAXIMUM POUT (W) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers 10 20 30 40 50 60 70 80 90 100 LOAD (I) 1% THD+N 0 0 10 20 30 40 50 60 70 80 90 100 LOAD (I) Stereo, High-Power, Class D Amplifiers (MAX98400A, VPVDD = 18V, VSHDN = 5V, LIM_TH = VS, TEMPLOCK = unconnected; G1 = GND, G2 = open (gain = 20.1dB), CIN = CREL = C1 = C2 = 1FF, typical values are at TA = +25NC, unless otherwise noted.) SUPPLY CURRENT vs. PVDD SUPPLY VOLTAGE (MONO) OUTPUT POWER vs. LOAD (MONO) 12 SUPPLY CURRENT (mA) 50 40 30 20 10% THD+N 8 6 IVS 4 2 10 1% THD+N VS = 5V 0 0 10 20 30 40 50 60 70 80 90 100 0 8 16 20 24 28 PVDD SUPPLY VOLTAGE (V) SUPPLY CURRENT vs. VS SUPPLY VOLTAGE (MONO) MAXIMUM OUTPUT POWER vs. PVDD (NO THERMAL SHUTDOWN, MONO) IPVDD 50 MAXIMUM POUT (W) 10 8 6 60 MAX98400 toc39 12 IVS 4 40 30 20 10 2 4I LOAD, THERMAL FOLD DISABLED VPVDD = 18V 0 5.00 4.75 5.25 5.50 0 8 12 16 20 24 VS SUPPLY VOLTAGE (V) PVDD SUPPLY VOLTAGE (V) LIMITER TRANSFER CHARACTERISTIC LIMITER RELEASE TIME RL = 8I + 68H LIM_TH = GND 22 20 VPVDD = 24V 18 16 28 MAX98400 toc42 MAX98400 toc41 24 OUTPUT VOLTAGE (V) 12 LOAD (I) 14 SUPPLY CURRENT (mA) IPVDD 10 MAX98400 toc40 POUT (W) 60 MAX98400 toc38 VPVDD = 24V 70 14 MAX98400 toc37 80 LIM_TH = GND INPUT 2V/div VPVDD = 18V 14 12 10 8 6 4 2 0 OUTPUT 4V/div VPVDD = 8V tRELEASE 0 0.5 1.0 1.5 2.0 2.5 3.0 200ms/div INPUT VOLTAGE (V) 11 MAX98400A/MAX98400B Typical Operating Characteristics (continued) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers 17 INR+ 30 16 INR- PVDD 31 15 GND PVDD 32 14 MAX98400A PVDD 33 13 GND MONO PGND 34 12 INL- PGND 35 11 INL+ N.C. 36 10 LIM_TH EP 1 2 3 4 5 6 7 8 9 OUTL- OUTL- N.C. OUTL+ OUTL+ VS N.C. G1 G2 + SHDN RELEASE TEMPLOCK 16 15 14 13 PGND 19 12 INR+ PGND 20 11 INR- PVDD 21 10 GND MAX98400B PVDD 22 PGND 23 PGND 24 EP + 1 2 3 4 5 6 G2 29 17 G1 PGND PGND 18 VS N.C. OUTR+ 18 OUTL- 28 OUTL+ N.C. OUTR- 27 26 25 24 23 22 21 20 19 OUTR- TOP VIEW OUTL- TEMPLOCK RELEASE SHDN N.C. OUTR+ OUTR+ N.C. OUTR- TOP VIEW OUTR- Pin Configurations 9 INL- 8 INL+ 7 LIM_TH TQFN TQFN Pin Descriptions PIN NAME FUNCTION MAX98400A MAX98400B 1, 2 1, 2 OUTL- 3, 7, 18, 22, 25, 28, 36 -- N.C. 4, 5 3 OUTL+ 6 4 VS 5V Regulator Supply. Bypass VS to GND with a 1F capacitor. Connect to a +5V source for dual-supply operation. 8 9 5 6 G1 G2 Three-State Input for Gain Selection 1. See the Detailed Description section. Three-State Input for Gain Selection 2. See the Detailed Description section. 10 12 7 LIM_TH Negative Left Speaker Output No Connection Positive Left Speaker Output See the Limiter Threshold Control (LIM_TH) section for details. Connect to: 1) VS to disable limiter. 2) GND to have no clipping. 3) RLIM1 resistor to GND to have a PVDD tracking threshold. 4) RLIM1 and RLIM2 resistor-divider to have an absolute threshold. Stereo, High-Power, Class D Amplifiers PIN MAX98400A MAX98400B NAME 11 8 INL+ 12 9 INL- 13 FUNCTION Left-Channel Positive Analog Input Left-Channel Negative Analog Input Mono Operation. Connect MONO to GND for stereo operation. Connect MONO to VS for mono operation. -- MONO 14, 15 10 GND Analog Ground 16 11 INR- Right-Channel Negative Analog Input 17 12 INR+ Right-Channel Positive Analog Input 19 13 TEMPLOCK 20 14 RELEASE 21 15 SHDN See the Thermal Foldback section for details. Connect to: 1) GND to disable thermal foldback. 2) Leave open to enable thermal foldback. Sets the Limiter Time Constant. Connect to GND through 1FF. Active-Low Shutdown Input Low = shutdown High = enable 23, 24 16 OUTR+ Positive Right Speaker Output 26, 27 17, 18 OUTR- Negative Right Speaker Output 29, 30, 34, 35 19, 20, 23, 24 PGND Power Ground 31, 32, 33 -- 21, 22 -- PVDD EP Power Supply. Bypass PVDD to PGND with 1FF and 200FF capacitors. Exposed Pad. Connect to PGND for optimum thermal performance. 13 MAX98400A/MAX98400B Pin Descriptions (continued) Stereo, High-Power, Class D Amplifiers MAX98400A/MAX98400B Stereo Configuration for MAX98400A 8V TO 28V C1 1.0F C2 1.0F VS PVDD 6 MONO CIN 1.0F LEFT INPUT CIN 1.0F CBULK 200F 31, 32, 33 13 REGULATOR MAX98400A INL+ 11 INL- 12 4, 5 OUTL+ CLIPPING LIMITER PGA 1, 2 OUTL- TEMPLOCK 19 CIN 1.0F RIGHT INPUT CIN 1.0F POWER STAGE THERMAL FOLDBACK INR- 16 CLIPPING LIMITER 10 LIM_TH WITH THERMAL AND OVERCURRENT PROTECTION PGA LIMITER CONTROL 20 RELEASE GAIN SELECTION BIAS AND OSCILLATOR 8 9 21 G1 G2 SHDN CREL 1.0F ENABLE 14 23, 24 OUTR+ INR+ 17 14, 15 GND 26, 27 OUTR- 29, 30, 34, 35 PGND Stereo, High-Power, Class D Amplifiers 8V TO 28V C2 1.0F CBULK 200F C1 1.0F PVDD VS MONO CIN 1F LEFT INPUT REGULATOR CIN 1F RIGHT INPUT MAX98400A 13 INL+ 11 INL- 12 CIN 1F 31, 32, 33 6 VS TEMPLOCK 4, 5 OUTL+ CLIPPING LIMITER PGA 19 1, 2 OUTL- POWER STAGE THERMAL FOLDBACK 23, 24 OUTR+ INR+ 17 INR- 16 CLIPPING LIMITER WITH THERMAL AND OVERCURRENT PROTECTION PGA 26, 27 OUTR- CIN 1F LIMITER CONTROL 10 LIM_TH GAIN SELECTION 20 RELEASE CREL 1.0F Detailed Description The MAX98400A/MAX98400B Class D amplifiers provide high-performance, thermally efficient amplifier solutions. The MAX98400A delivers 2x20W into 8I loads or 1x40W into a 4I load. The MAX98400B delivers 2x12W into 8I loads. An integrated limiting circuit prevents output clipping distortion and protects small speakers from transient voltages. A thermal-foldback feature can be enabled to automatically reduce the output power if the supply voltage, input signal, and/or ambient temperature are too high to operate within a junction temperature of +130NC. Traditional 8 9 G1 G2 BIAS AND OSCILLATOR 21 14, 15 SHDN GND 29, 30, 34, 35 PGND ENABLE thermal protection is also available in addition to robust overcurrent protection. Both devices operate from an 8V to 28V supply and provide a high 67dB PSRR, eliminating the need for a regulated power supply. They offers up to 90% efficiency from a 12V supply. Filterless modulation allows the ICs to pass EN55022B EMI limits with 1m cables using only a low-cost ferrite bead and small-value capacitor on each output (Figure 1). Comprehensive click-and-pop reduction circuitry minimizes noise coming into and out of shutdown. 15 MAX98400A/MAX98400B Mono Configuration for MAX98400A The MAX98400A/MAX98400B are available in 36-pin and 24-pin TQFN packages, respectively, and are specified over the -40NC to +85NC temperature range. Efficiency The high efficiency of a Class D amplifier is due to the switching operation of the output stage transistors. In a Class D amplifier, the output transistors act as switches and consume negligible power. Power loss associated with the Class D output stage is due to the I2R loss of the MOSFET on-resistance, various switching losses, and quiescent current overhead. The theoretical best efficiency of a linear amplifier is 78% at peak output power. Under typical music reproduction levels, the efficiency falls below 30%, whereas these ICs exhibit > 85% efficiency under the same conditions (Figure 2). Shutdown The ICs feature a shutdown mode that reduces power consumption and extends battery life in portable applications. The shutdown mode reduces supply current to 8FA (typ). Drive SHDN high for normal operation. Drive SHDN low to place the device in low-power shutdown mode. In shutdown mode, the outputs are high impedance and the common-mode voltage at the output decays to zero. The shutdown mode serves as a mute function. Click-and-Pop Suppression The ICs feature comprehensive click-and-pop suppression that minimizes audible transients on startup and shutdown. While in shutdown, the H-bridge is in a highimpedance state. Mono Configuration The MAX98400A features a mono mode that allows the right and left channels to operate in parallel, achieving up to 40W of output power. Apply a logic-high (VS) to MONO to enable mono mode. In mono mode, an audio signal applied to the left channel (INL) is routed to the H-bridges of both channels. Connect OUTL+ to OUTR+ and OUTL- to OUTR- using heavy PCB traces as close as possible to the device. Driving MONO low (stereo mode) while the outputs are wired together in mono mode can trigger the short-circuit or thermal-overload protection, or both. Clipping Limiter The ICs feature a programmable clipping limiter to prevent output clipping distortion and excessive power dissipation and to protect small speakers. All limiter functionality is controlled by two pins: LIM_TH and RELEASE. The voltage applied at the LIM_TH pin controls the threshold when the limiter acts, and the capacitor at the RELEASE pin controls the release time of the limiter. The limiter controls both left and right channels together. EFFICIENCY vs. OUTPUT POWER 40 100 90 30 20 10 70 60 50 40 CLASS AB 30 0 20 10 -10 30 100 FREQUENCY (MHz) Figure 1. MAX98400B EMI Performance 16 MAX98400A 80 EFFICIENCY (%) AMPLITUDE (dBV/m) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers 1000 0 0 5 10 15 20 TOTAL OUTPUT POWER (W) Figure 2. MAX98400A Efficiency vs. Class AB Efficiency Stereo, High-Power, Class D Amplifiers In Mode1, the limiter is disabled. The output clips when output peak voltage reaches the voltage on PVDD, VPVDD. In Mode2, the limiter threshold (VTHRESH) tracks supply voltage, VPVDD. The peak output voltage is limited to approximately VTHRESH = VPVDD x 0.95. In Mode3, the limiter threshold, VTHRESH, is programmable. VLIM_TH can be set to a voltage proportional to the desired output threshold. The limiter threshold can be set down to 0.5 x VPVDD and up to 1.6 x VPVDD. VTHRESH cannot exceed 22V. For a 5V supply, a resistor-divider of RLIM1 = 165kI/ RLIM2 = 270kI gives both an unloaded voltage of 1.82V and the desired output resistance of approximately 100kI. If only distortion limiting is desired, set VTHRESH to be 20% higher than VPVDD. This limits the output clipping levels to approximately 10% THD. The attack time for the limiter is fixed, typically < 200Fs. Release Time Control (RELEASE) The release time for the limiter is set by an external capacitor at RELEASE (CREL) to GND. Choose CREL = Release Time [s] x 1FF. The CREL limit is 2.2FF. Threshold settings below VPVDD can be used to protect speakers; the peak output voltage is limited to a value of VTHRESH = VLIM_TH x 6.4. MAX98400A MAX98400B Threshold settings above VPVDD can be used to limit the output distortion; the peak output voltage is limited to a value of VTHRESH = VLIM_TH x 6.4 x 0.95. The 0.95 factor takes into account the voltage drop across the power FET that occurs when the amplifier is clipped. Choose RLIM1 and RLIM2 (Figure 3) to set the desired voltage at the LIM_TH pin. For best accuracy, the parallel combination RLIM1||RLIM2 should be approximately 100kI. PVDD PVDD PVDD 18V C1 1.0F VS REGULATOR VS RLIM2 Example: If the speaker in the application can handle only 12V peak, but VPVDD is higher, the threshold voltage (VTHRESH) should be set to 12V: C2 1.0F LIMITER CONTROL LIM_TH RLIM1 VTHRESH = 12V RELEASE CREL 1.0F The voltage that needs to be applied to VLIM_TH is then defined as: VLIM_TH = VTHRESH/6.4 = 12V/6.4 = 1.88V Figure 3. Limiter Control, Mode3 Configuration (Table 1) Table 1. Limiter Control Modes MODE NAME FUNCTION LIM_TH VOLTAGE RANGE Mode1 Disable The limiter is disabled when connecting LIM_TH to VS or a voltage greater than 3.9V. 3.9V < VLIM_TH P VS Mode2 PVDD tracking The output peak voltage is limited to just below the supply voltage, VPVDD. VTHRESH = VPVDD x 0.95 when LIM_TH is connected to ground or a voltage below 0.3V. VGND P VLIM_TH < 0.15V Programmable The output peak voltage, VTHRESH, is limited to the threshold set by the voltage applied on the LIM_TH so that VTHRESH = VLIM_TH x 6.4. When VTHRESH is set 20% higher than VPVDD, the output THD distortion is limited to 10%. 0.6V P VLIM_TH P 3.8V Mode3 Note: VTHRESH is the output peak limiting voltage (limiter threshold voltage). 17 MAX98400A/MAX98400B Limiter Threshold Control (LIM_TH) There are three modes for the limiter, defined by VLIM_TH, the voltage applied to the LIM_TH pin (Table 1). MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Preamplifier Gain Setting sequence. The shutdown and recovering sequence is repeated until the output fault is removed. The ICs offer eight pin-selectable gain settings, selectable through the G1 and G2 pins. Applications Information Protection Filterless Class D Operation The ICs feature overcurrent protection and two types of thermal protection: thermal foldback and overtemperature protection. Traditional Class D amplifiers require an output filter to recover the audio signal from the amplifier's output. The filters add cost, increase the solution size of the amplifier, and can decrease efficiency and THD+N performance. The traditional PWM scheme uses large differential output swings (2 x VDD peak-to-peak) and causes large ripple currents. Any parasitic resistance in the filter components results in a loss of power, lowering the efficiency. Thermal Foldback The ICs feature thermal foldback that helps prevent unwanted thermal-shutdown events. If activated, thermal foldback attenuates the stereo output signal once the internal junction temperature exceeds +130NC. Attenuation is applied proportionally as the junction temperature (TJ) exceeds the fixed +130NC threshold. The thermal-foldback mode is controlled by the TEMPLOCK pin. These ICs do not require an output filter. The devices rely on the inherent inductance of the speaker coil and the natural filtering of both the speaker and the human ear to recover the audio component of the square-wave output. Eliminating the output filter results in a smaller, lower cost solution. Overtemperature Protection The ICs feature an overtemperature protection that disables the amplifier if the junction temperature exceeds +165NC. Once the amplifier is disabled and the die temperature has cooled by 20NC, the devices enable again and resume normal operation. Because the frequency of the ICs' output is well beyond the bandwidth of most speakers, voice coil movement due to the square-wave frequency is very small. For optimum results, use a speaker with a series inductance > 10FH. Typical 8I speakers exhibit series inductances in the 20FH to 100FH range. Overcurrent Protection When the output current reaches the current limit, 5A (typ), the ICs disable the outputs and initiate a recovering Table 2. Gain Selection 18 GAIN SETTING (dB) G1 G2 GND GND 9 Unconnected GND 13 VS GND 16.7 GND Unconnected 20.1 Unconnected Unconnected 23.3 VS Unconnected 26.4 GND VS 29.8 Unconnected VS 32.9 VS VS Reserved Stereo, High-Power, Class D Amplifiers The load impedance of the speaker determines the filter component selection (Table 3). Inductors L1 and L2 and capacitor C1 form the primary output filter. Capacitors C2 and C3 provide commonmode filtering to reduce radiated emissions. Capacitors C4 and C5, plus resistors R1 and R2, form a Zobel at the output. A Zobel corrects the output loading to compensate for the rising impedance of the loudspeaker. Without a Zobel, the filter exhibits a peak response near the cutoff frequency. Component Selection Input Capacitor The input AC-coupling capacitors allow the amplifier to automatically bias the signal to an optimum DC level. 1FF is recommended for the input capacitor. Power Supplies The ICs are designed to be operated from a singlesupply voltage, VPVDD, which can range from 8V to 28V. Inside the ICs, this VPVDD supplies power for the output FETs and other high-power circuitry, while the low-power circuitry operates from VS, an internally generated 5V supply (4.6V typ). VS is internally generated from a linear regulator that is powered from VPVDD. Bypass both PVDD and VS pins to ground with a 1FF capacitor. C2 C4 R1 L1 L2 C3 Supply Bypassing, Layout, and Grounding Proper layout and grounding are essential for optimum performance. Use wide traces for the power-supply inputs and amplifier outputs to minimize losses due to parasitic trace resistance. Proper grounding improves audio performance, minimizes crosstalk between channels, and prevents switching noise from coupling into the audio signal. Connect PGND and GND together at a single point on the PCB. Route all traces that carry switching transients away from GND and the traces/ components in the audio signal path. Bypass each PVDD pin with a 0.1FF capacitor to PGND. Place the bypass capacitors as close as possible to the ICs. Place a 220FF capacitor between PVDD and PGND. Bypass both PVDD and VS pins with a 1FF capacitor to GND. Use wide, low-resistance output traces. Current drawn from the outputs increases as load impedance decreases. High-output trace resistance decreases the power delivered to the load. The TQFN package features an exposed thermal pad on its underside. This pad lowers the package's thermal resistance by providing a heat conduction path from the die to the PCB. Connect the exposed thermal pad to PGND by using a large pad and multiple vias to the PGND plane. For best optimum thermal performance, use 2oz copper and allow lots of PCB area around the device. C1 MAX98400A/B Internal Regulator VS For highest efficiency operation and best thermal performance, especially at higher VPVDD levels, the VS can be supplied from an external 5V supply. To do this, connect a 5V source to the VS pin (4.75V to 5.5V). When a 5V supply is connected to the VS pin, the internal regulator is automatically disabled and the power dissipation of the ICs is reduced. Chip Information C5 R2 PROCESS: CMOS Figure 4. Output Filter for PWM Mode Table 3. Filter Component Selection RL (I) L1, L2 (H) C1 (F) C2, C3 (F) C4, C5 (F) R1, R2 (I) 4 10 0.47 0.10 0.22 10 8 15 0.15 0.15 0.15 15 16 33 0.10 0.10 0.10 33 19 MAX98400A/MAX98400B Inductor-Based Output Filters Some applications use the ICs with a full inductor-/ capacitor-based (L/C) output filter. See Figure 4 for the correct connections of these components. Stereo, High-Power, Class D Amplifiers MAX98400A/MAX98400B Functional Diagrams PVDD VS 31, 32, 33 6 MONO 13 MAX98400A REGULATOR INL+ 11 INL- 12 4, 5 OUTL+ CLIPPING LIMITER PGA 1, 2 OUTL- TEMPLOCK 19 POWER STAGE THERMAL FOLDBACK 23, 24 OUTR+ INR+ 17 INR- 16 CLIPPING LIMITER LIMITER CONTROL 10 LIM_TH 20 WITH THERMAL AND OVERCURRENT PROTECTION PGA GAIN SELECTION 20 RELEASE 8 9 G1 G2 26, 27 OUTR- BIAS AND OSCILLATOR 21 SHDN 14, 15 GND 29, 30, 34, 35 PGND Stereo, High-Power, Class D Amplifiers VS PVDD 4 21, 22 REGULATOR MAX98400B INL+ 8 INL- 9 3 OUTL+ CLIPPING LIMITER PGA 1, 2 OUTL- TEMPLOCK 13 POWER STAGE THERMAL FOLDBACK 16 OUTR+ INR+ 12 INR- 11 CLIPPING LIMITER LIMITER CONTROL 7 LIM_TH WITH THERMAL AND OVERCURRENT PROTECTION PGA GAIN SELECTION 14 RELEASE 5 6 G1 G2 17, 18 OUTR- BIAS AND OSCILLATOR 15 SHDN 10 GND 19, 20, 23, 24 PGND 21 MAX98400A/MAX98400B Functional Diagrams (continued) MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 22 PACKAGE TYPE PACKAGE CODE OUTLINE No. LAND PATTERN NO. 36 TQFN-EP T3666+2 21-0141 90-0052 24 TQFN-EP T2444+4 21-0139 90-0068 Stereo, High-Power, Class D Amplifiers 23 MAX98400A/MAX98400B Package Information (continued) For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. MAX98400A/MAX98400B Stereo, High-Power, Class D Amplifiers Package Information (continued) For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 24 Stereo, High-Power, Class D Amplifiers 25 MAX98400A/MAX98400B Package Information (continued) For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Stereo, High-Power, Class D Amplifiers MAX98400A/MAX98400B Revision History REVISION NUMBER REVISION DATE 0 6/10 DESCRIPTION Initial release PAGES CHANGED -- Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 26 (c) Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.