ATC 100 C Series Porcelain High RF Power Multilayer Capacitors e Case C Size (.250" x .250") * Capacitance Range 1 pF to 2700 pF High Q Ultra-Stable Performance Low ESR/ESL = High RF Current/Voltage High RF Power High Reliability ATC, the industry leader, is announcing new improved ESR/ESL performance for the 100 C Series RF Capacitors. This high Q multilayer capacitor is ultra- stable under high RF current and voltage applications. Self-encapsulating porcelain construction provides a rugged, hermetic package without the need or liability of external encapsulants. Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and D.C. Blocking. Typical circuit applications: VHF/UHF RF Power Amplifiers, Antenna Tuning, Plasma Chambers and Medical (MRI coils). ENVIRONMENTAL TESTS ATC 100 C Series Capacitors are designed and manufactured to meet and exceed the require- ments of ELA-198, MIL-C-55681 and MIL-C-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts D.C. applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. A oO 5-05-07 ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 10,000 (1.0 pF to 1000 pF) @ 1 MHz. Greater than 10,000 (1100 pF to 2700 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (T.C.): +90 +30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 1 pF to 2700 pF: 10 Megohms min. @ +25C at rated WVDC. 10* Megohms min. @ +125C at rated WVDC. Max. test voltage is 500 Vdc. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): * See page 2. RETRACE: Less than +(0.02% or 0.02 pF), whichever is greater. AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). CAPACITANCE DRIFT: +(0.02% or 0.02 pF), whichever is greater. OPERATING TEMPERATURE RANGE: From -55C to +125C (No derating of working voltage). TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 Ibs. min., 20 Ibs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD- 202, method 211. american technical ceramics corp. one norden lane, huntington station, n.y. 11746-2142 usa phone: (516) 547-5700 fax: (516) 547-5748 + e-mail: atc@interserv.com ATC # 001-808 Rev. A 4/96; 1 of 8 D bE MM 0773409 0001034 ceTlATC 100 C Capacitance Values CAP. | CAP. RATED | CAP. | CAP. RATED J} CAP. | CAP. RATED | CAP. | CAP. RATED CODE | (pF) |TOL.| WVDC | CODE | (PR | TOL. | wvDC |] CODE | (pF) | TOL.| wvpc | CODE | (pF) | TOL.| WwvDC 1RO 1.0 8R2 82 | BCD 680 68 471 470 1500 1R2 1.2 100 10 820 82 561 560 1R5 15 120 12 101 100 681 680 1R8 1.8 150 15 121 120 2500 821 820 1000 2R2 2.2 180 18 151 150 | FG, 102 1000 | FG, 2R7 7 Br 2500 220 22 1 Ms 2500 181 180 | 1K, 122 1200 i 3R3 3.3 270 27 M 221 220 M 152 1500 500 3R9 3.9 330 33 271 270 182 1800 ; 4R7 47 390 39 331 330 222 2200 , 1500 300 5R6 5.6 470 47 391 390 272 2700 6R8 68 560 56 SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. VRMS = 0.707 x WVDC Series Case Size Capacitance Code: * DWV: 1 pF to 470 pF: 120% of rated WVDC for 5 secs. 560 pF to 1200 pF: 150% of rated WVDC for 5 secs. 1500 pF to 2700 pF: 250% of rated WVDC for 5 secs. CAPACITANCE TOLERANCE Code} B C D F Gi] J K M Tol. | +0.1 pF | 0.25 pF | +0.5 pF +1% | +2% | +5% | +10% | +20% ATC100 C 10 0 J W 2500 X B a ATC PART NUMBER CODE First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance Packaging B - Bulk Packaging - Preferred (packed in plastic bags) C- ATC Cap-Pac (Waffle-pack) I - Special Packaging. Consult Factory Laser Marking WVDC Termination Code The above part number refers to a 100 C Series (case size C) 10 pF capacitor, J tolerance (45%), 2500 WVDC, with W termination (solder plate), laser marking and bulk packaging. For additional information and catalogs contact your ATC representative or call direct at (516) 547-5700. American Technical Ceramics One Norden Lone, Huntington Station, N.Y. 11746-2142 D Consult factory for additional performance data. @ SbE @ 0773409 0001039 136 phone (516) 547-5700 fax (516) 547-5748 e-mail: atc@interserv.com 2 of 8ATC 100 C Capacitors: Mechanical Configurations BODY DIMENSIONS ATC | aTC CASE OUTLINES Inches LEAD AND TERMINATION SERIES (mm) & CASE TERM. SIZE W/TIBA DIMENSIONS SIZE CODE & TYPE TERMINATION SURFACE LENGTH wins THICKNESS AND MATERIALS c , 2330 SOLDER PLATE eo we +.020 -.010 Nickel barrier, solder plated. 100C WwW a Rugged, high performance (5.84 && gp So 1 +| L jet >| 7 fe 4 termination for lower cost, high Ider Plate +0.51 -0.25) 8 volume applications. PP C 4 a0 BARRIER/CAP eo w +.070 -.010 Nickel barrier, solder plated 100C P - (5.84 with the addition of hot solder Pellet aft fe fal tie +1.78 -0.25) dip process. Solder melting 250 .015 temperature is 355F, 179C. (6.35 0.38) Cc eS + UNI-TERM 100C CA [| w NICKEL BARRIER, ajo tlt fe GOLD PLATED Gold Chip | 230 TERMINATIONS +.020 -.010 (5.84 a +0.51 -0.25) we , CHIP woe | 145 (3.68) PALLADIUM SILVER Chip at fe So] fe max for TERMINATIONS capacitance Th values : . cog}. camp | High Panty none ws m " L 500 (12.7) mi Microstrip + fi tid 165 (4.19) LY a7 MAN. Lt alte max. for W_, = -240 +005 T capacitance (6.10 +.127) Coy a ley ee values T= 004 +.001 aa > 680 pF. 100C | AR Wh w P (102 #.025) : : > Leads are Attached with Axial Ribb neon , fb [a | T Ie High Temperature Solder. Seer of tele + Silver-plated Copper Leads f Je 245 +.025 | .250 +.015 7 tor | Aw 1} (6.22 20.64) | (6.35 40.38) EL 1025.4) min. Axial Wire -| L | | tT \< Dia. = .025 +.002 (0.64 40.05) c Se clipe, sims Silver Leads + Ly = .500 (12.7) min. 100C VA Ww =TL L Vertical + WL = * See below Axial Ribbon att le oT Ie Ty, = .004 =.001 (.102 4.025) Cc rte [+ ; as 4 Silver-plated Copper Leads 100C | RW _ Ly = 1.0 (25.4) min. Radial Wire ou ds tow le Dia. = .032 +.002 (0.81 +0.05) Custom lead styles and lengths are available; consult factory. All 100 C Capacitors are available laser marked with ATC's identification, capacitance code and tolerance. * Wy =.110 (2.79) for capacitance values < 680 pF W{| = -130 (3.30) for capacitance values > 680 pF 30f8 American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2142 SbE Mi 0773409 0001040 5ST 2rv.comATC 100 C Capacitors: Non-Magnetic Mechanical Configurations BODY DIMENSIONS Seniks ATC CASE OUTLINES Inches (mm) LEAD AND TERMINATION & CASE TERM. SIZE W/TISA DIMENSIONS SIZE CODE & TYPE TERMINATION SURFACE LENGTH WIDTH THICKNESS AND MATERIALS Cc = 4 230 NON-MAGNETIC , Copper barrier, solder plated. w +.025 -.010 } .250 +.015 PP * P 100C | WN __ a (5.84 | (6.35 40.38) Rugged, high performance Non-Mag + fe tft fe +0.64 -0.25) termination for lower cost, high Solder Plate volume applications. 4 c ot 30 NON-MAGNETIC ae w +.070 -.010 | .250 +.015 Copper barrier plated with the 100C PN > 6.84 | (6.35 +0.38) addition of hot solder dip Non-Mag ob fe tft fe : ~ -145 (3.68) process. Solder meltin Pell +1.78 -0.25) 8 ellet max. for temperature is 355F, 179C. capacitance Cc 1 230 values ~~ . < 680 pF; .; ee w +.020 -.010 | .250 +015 P NON-MAGNETIC 100C CN _ (5.84 (6.35 40.38) PALLADIUM SILVER Non-Mag alu fe faft fe +051 -0.25) 165 (4.19) TERMINATIONS Chip . . max. for capacitance values : . > 680 pF. High Purity i Silver Leads Cc + slule y lle Ly, = 500 (12.7) min. joc | MN a . J w i 245 1.025 | .250 2.015 WL = -240 2.005 PUP fe Taf te. [622 0.64) | (6.35 40.38) (6.10 #127) Non-Mag Th = 004 +.001 | Microstrip (102 +.025) | Leads are Attached with High Temperature Solder. Custom lead styles and lengths are available; consult factory. All 100 C Capacitors are available laser marked with ATCs identification, capacitance code and tolerance. American Technical Ceramics One Norden Lone, Huntington Station, N.Y. 11746-2142 *| D bE M@@ 0773409 0001041 896 MH irv.com 40f8ATC 100 C Performance Data @ ESR VS CAPACITANCE ATC SERIES 100, CASE C 500 MHz 0.1 E 150 MHz ow = 30 MHz 0.01 0.001 1 10 100 1000 10000 CAPACITANCE (pF) Q VS CAPACITANCE ATC SERIES 100, CASE C 100000 10000 | o 1000 150 MHz 100 (Typical) 10 1 10 100 1000 10000 @ CAPACITANCE (pF) | American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2142 i 5at8 D 9bE Mf O775409 OOOLO4e Pee om i(MHz) FREQUENCY 10000 1000 (Amps) RMS CURRENT ATC 100 C Performance Data SERIES RESONANCE VS CAPACITANCE ATC SERIES 100, CASE C 100 ] 10 100 1000 10000 CAPACITANCE (pF) CURRENT RATING VS CAPACITANCE ATC SERIES 100, CASE C 100 The current rating is based ona 85C mounting surface with a thermal resistance of 15C/W. A power dissipation of 4 W will result in a case temperature of 125C. Qo 150 MHz 500 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 10 100 1000 10000 CAPACITANCE (pF) 0.1 iin American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2142 e dD SbF ME O773409 OOOL043 &LbL95 6 of 8ATC 100 C Performance Data CAPACITANCE CHANGE VS TEMPERATURE ATC SERIES 100, CASE C 1.5 T q TC = +90 + 30 PPM/C % CHANGE IN CAPACITANCE -55 -35 -15 5 25 45 65 85 105 125 TEMPERATURE (Degrees C) American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 7 of 8 e D SbE mm o773409 o0o01044 STS