Safety instructions SIMATIC Industrial PC Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions 03/2019 A5E46844810-AA 1 Initial startup: Commissioning the operating system 2 Restoring the factory settings of the operating system and partitions(Restore) 3 Configuring and updating the operating system 4 Extended scope of delivery of the provided USB stick 5 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. Trademarks All names identified by (R) are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Division Energy Management Postfach 32 20 91050 ERLANGEN GERMANY A5E46844810-AA 02/2019 Subject to change Copyright (c) Siemens AG 2019. All rights reserved Table of contents 1 Safety instructions ........................................................................................................................................5 1.1 Industrial Security.....................................................................................................................5 1.2 Disclaimer for third-party software updates..............................................................................5 1.3 Notes on protecting administrator accounts.............................................................................5 2 Initial startup: Commissioning the operating system ....................................................................................7 3 Restoring the factory settings of the operating system and partitions(Restore) ...........................................9 4 Configuring and updating the operating system .........................................................................................11 5 4.1 Changing the display language, region and formats of the operating system .......................11 4.2 Installing new display languages for the operating system from the provided USB stick ......11 4.3 Updating the operating system ..............................................................................................12 Extended scope of delivery of the provided USB stick ...............................................................................13 5.1 Display languages supplied for the operating system............................................................13 Index...........................................................................................................................................................15 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 3 Table of contents 4 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Safety instructions 1.1 1 Industrial Security Industrial Security Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement - and continuously maintain - a holistic, state-of-the-art industrial security concept. Siemens' products and solutions only form one element of such a concept. Siemens' products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place. Additionally, Siemens' guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit (http://www.siemens.com/ industrialsecurity). Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer's exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under (http://www.siemens.com/industrialsecurity). 1.2 Disclaimer for third-party software updates This product includes third-party software. Siemens AG only provides a warranty for updates/ patches of the third-party software, if these have been distributed as part of a Siemens software update service contract or officially released by Siemens AG. Otherwise, updates/patches are undertaken at your own risk. You can find more information about our Software Update Service offer on the Internet at Software Update Service (http://w3.siemens.com/mcms/topics/en/ simatic/licenses/software-update-service/Pages/Default.aspx). 1.3 Notes on protecting administrator accounts A user with administrator privileges has extensive access and manipulation options in the system. Therefore, ensure there are adequate safeguards for protecting the administrator accounts to prevent unauthorized changes. To do this, use secure passwords and a standard user account Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 5 Safety instructions 1.3 Notes on protecting administrator accounts for normal operation. Other measures, such as the use of security policies, should be applied as needed. 6 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Initial startup: Commissioning the operating system 2 An operating system with installed device drivers and SIEMENS software products is already installed on your device in the delivery state. After the initial startup, you can make the following personal settings using the menu: Set the display language and region Create a user account Requirements No USB data storage media is connected to the device. For devices with optical drives: There is no data storage medium in the optical drive. A keyboard, a mouse and a monitor are connected to the device. The default settings in the BIOS Setup are unchanged before the operating system is commissioned. Procedure NOTICE Operational safety of the device and system in danger Faulty or interrupted commissioning of the operating system can put the operational safety of your device and the system at risk. Do not switch off the device during commissioning. 1. Switch on the device. 2. The operating system sets up automatically. During this process, the device can restart several times. 3. Wait until you are prompted to select the language. 4. Type in the product key as required. The product key is located on the "Certificate of Authenticity" label (COA label) or on an enclosed "Certificate of Authenticity Card". 5. Follow the instructions on the screen. Once the user logs on for the first time and the Windows(R) user interface has loaded, the operating system is fully operational. Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 7 Initial startup: Commissioning the operating system 8 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Restoring the factory settings of the operating system and partitions(Restore) 3 With the USB stick, you can restore the factory settings of the target system (which means the volume partitions, the operating system with installed device drivers, and the SIEMENS software products). You can quickly restore your device if it is damaged. Setting Boot mode Note Siemens recommends that you restore the target system in the Boot mode as the delivery state. For more information, refer to the operating instructions of the device. You can restore the target system in the following boot mode: Legacy mode (MBR volume): To support older extensions and functions, such as older PCI(e) cards and older software products, the operating system must be restored to boot in Legacy mode. For this purpose, the provided USB stick must also be booted in Legacy mode. The target system is then set up with an MBR volume and boots in Legacy mode. Requirements If the data of partition D: (Data) should be retained during restore, be aware of the following requirement: The complete target system is partitioned as in the delivery state. The target system is restored in the Boot mode that was set in the delivery state. You can find information on the delivery state in the operating instructions of the device. Procedure Note In order for the device to boot from the provided USB stick, this may have to be set in the BIOS settings. For more information, refer to the operating instructions of the device. Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 9 Restoring the factory settings of the operating system and partitions(Restore) NOTICE Risk of data loss Files, user settings as well as existing authorizations and license keys are lost when a restore is performed! Back up your data before restoring. 1. Insert the provided USB stick into the device. 2. Reboot the device. 3. Boot with the provided USB stick in the Boot mode you have set beforehand. The Restore program from Siemens starts after a few seconds. 4. Follow the instructions on the screen. Note the following information. Selecting the images to be installed Option: Recovery Use this option if you want to recovery the operating system without additional device drivers and without SIEMENS software products. Option: Restore Use this option if you want to restore the operating system with the installed device drivers and SIEMENS software products. Selecting the partitions to be installed Option: Restore complete system disk (MBR) Use this option if you want to restore the entire target system, including the partitions C: (System) and D: (Data). Option: Restore existing system partition only Use this option if you want to restore the selected partition. 10 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Configuring and updating the operating system 4.1 4 Changing the display language, region and formats of the operating system Changing the settings of the logged-in user account 1. Select: "Control Panel > Region and Language". 2. Make the desired changes in the following tabs: - "Formats" - "Location" - "Keyboards and Languages" Changing the system account and the standard user account settings You can change the settings for the display language, region and formats of the system account (for example, the display language in the user login dialog) and the settings of the standard user account (default setting for new users). The settings of the registered user are copied to the system account and the standard user account for this purpose. 1. Select: "Control Panel > Region and Language". 2. Make the desired changes in the following tab: - "Administrative" 4.2 Installing new display languages for the operating system from the provided USB stick Install new display languages for the operating system if you want to select a language other than the languages available for selection in the settings for display language, region, and format settings. You can find information on the languages that can be installed from the provided USB stick in the section "Display languages supplied for the operating system (Page 13)". Requirements You have administrator rights for the system. A keyboard is connected to the device. Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 11 Configuring and updating the operating system 4.3 Updating the operating system Procedure 1. Insert the provided USB stick into the device. 2. Select: "Control Panel > Region and Language". 3. Select the "Keyboard and Languages" tab. 4. In the "Display language" area, click on the "Install/uninstall languages" button. 5. Select the language that you want to install from the "Languagepacks" folder on the provided USB stick. 4.3 Updating the operating system As described in the section "Industrial Security (Page 5)", we recommend updating the operating system as soon as the appropriate updates are available. Requirements You have administrator rights for the system. The device is connected to the Internet. Procedure 1. Select "Control Panel > Windows Update > Check for updates". Windows(R) determines the updates that are not installed. 2. Then start the download and installation process. 12 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Extended scope of delivery of the provided USB stick 5.1 5 Display languages supplied for the operating system The following display languages for the operating system are stored in the "Languagepacks" folder on the provided USB stick: Language Region Abbreviation German Germany de-De English USA en-us Spanish Spain es-es French France fr-fr Italian Italy it-it Japanese Japan ja-jp Russian Russian Federation ru-ru Simplified Chinese China zh-cn Chinese Hong Kong zh-hk Chinese Tainwan zh-tw Korean Korea ko-kr Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 13 Extended scope of delivery of the provided USB stick 5.1 Display languages supplied for the operating system 14 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA Index B U Boot mode Legacy mode, 9 Update Operating system, 12 D Delivery state, 9 Display languages for the operating system Installing new display languages, 11 Provided, 13 Setting, 11 L Legacy mode Restore, 9 M MBR volume, 9 O Operating system Setting display languages, 11 Updating, 12 R Restore, 9 S Standard user account, 11 Switching on, 7 System account, 11 T Target system, 9 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA 15 Index 16 Microsoft(R) Windows(R) 7 (USB stick) Operating Instructions, 03/2019, A5E46844810-AA