This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
September 2013 Doc ID 023962 Rev 3 1/8
1
EV-VND5E160J
VND5E160J evaluation board
Data brief
−
production data
Features
■
Simple single IC application board dedicated
for VND5E160J-E
■
Provides thermal heat-sinking for ease of use
in prototyping.
■
Provides electrical connectivity for easy
prototyping
Description
EV-VND5E160J provides you an easy way to
connect ST’s surface mounted VIPower
®
drivers
into your existing prototype circuitry. This
evaluation board comes pre-assembled with
VND5E1 60J -E hig h- side dr iv er.
The VND5E160J-E is a double channel high-side
driver manufactured using ST proprietary
VIPow er M0-5 techno log y and hou se d in
PowerSSO-12 package. The VND5E160J-E is
designed to drive automotive grounded loads,
providing protection, diagnostics and easy 3 V
and 5 V CMOS-compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel in order to provide enhanced
diagnostic functions including fast detection of
overload and short-circuit to ground,
overtemperature indication, short-circuit to V
CC
diagnosis and
ON-state and OFF-state open-load detection.
The diagnostic feedback of the whole device can
be disabled by pulling the STAT_DIS pin up, thus
allowing wired-ORing with similar devices.
Figure 1.
VND5E160J evaluation boar d
Parameter Symbol Value Unit
Max supply voltage V
CC
41 V
Operati ng vol tage range V
CC
4.5 to 28 V
Max On-State re sistance R
ON
50 mΩ
Current lim itation (typ) I
LIMH
27 A
Off state supply current I
S
2 µA
(1)
1. Typical value with all loads connected.
Table 1. Device summary
Order code Reference
EV-VND5E160J VND5E160J evaluation board
www.st.com
Design recommendations EV-VND5E160J
2/8 Doc ID 023962 Rev 3
1 Design recommendations
This evaluation board provides mounting solution and some heat sinking capability for
prototype development, but there are still external components that are required to make
these devices work in any application. For further information on how the evaluation board
has to be used you can refer to the AN4210 (see Appendix A: Reference documents).
Figure 2 illustrates the necessary components for any application.
Figure 2. VND5E160J evaluation board
ST has produced a user manual for safe designs using ST’s VIPower devices. This is
UM1556 (see Appendix A: Reference documents). UM1556 is a VIPower Hardware design
guide that provides all necessary information to successfully design your circuit using our
VIPower drivers.
All designs have different needs and requirements. Whatever design you decide to use, it
will still need to be verified in order to meet your application specifications. ST implies no
guarantee or warranty (see Appendix A: Reference documents).
,OADS
6PDOO6LJQDO
'LRGH
)RU5HYHUVH
%DWWHU\3URWHFWLRQ
1&
287387
287387
287387
287387
1&
*1'
67$7B',6
,1387
,1387
67$786
67$786
7$%
9&&%DWWHU\
,1387
,1387
67$786
9
N
2SWLRQDO
*$3*&)7
/RDGV
N5HVLVWRUV
67$7B',6
67$786
9
5"#
5"#
O'
O'
O'
9
9
EV-VND5E160J Thermal data
Doc ID 023962 Rev 3 3/8
2 Thermal data
Table 2. VND5E160J-E thermal data
Symbol Parameter Max. value Unit
R
thj-amb
Thermal resistance juncti on-ambie nt (MA X) 32 °C/W
Table 3. PCB specifications
Parameter Value Unit
Board dimensions 38 x 38 mm
Number of Cu layer 2 —
Layer Cu thickne ss 70 µm
Board finish thickness 1.6 +/- 10% mm
Board Material FR4 —
Thermal vias separation 1.2 mm
Thermal vias diameter 0.3 +/- 0.08 mm
Board connect or refer ence EV-VND5E1 60J
4/8 Doc ID 023962 Rev 3
3 Board connector reference
Figure 3. Board layout
Table 4. Board connector specification
Connector Board lead number Device pin function
(1)
1. For further clarification on pin functions please refer to the related datasheet (see Appendix A: Reference
documents).
J1 TAB V
CC
J1 1 GND
J1 2 STAT_DIS
J1 3 INPUT1
J1 4 STATUS1
J1 5 STATUS2
J1 6 INPUT2
J2 TAB V
CC
J2 7 N.C.
J2 8 OUTPUT2
J2 9 OUTPUT2
J2 10 OUTPUT1
J2 11 OUTPUT1
J2 12 N.C.
EV-VND5E160J Package information
Doc ID 023962 Rev 3 5/8
4 Package information
4.1 ECOPACK
®
packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Reference documents EV-VND5E160J
6/8 Doc ID 023962 Rev 3
Appendix A Referen ce documents
1. Double channel high side driver for automotive applications (VND5E160J-E,
DocID 13626)
2. VIPower M0-5 and M0-5Enhanced high-side drivers (UM1556, DocID 023520)
3. PowerSSO-12 devices evaluation bord (AN4210, DocID 023963)
4. Evaluation Product Licence Agreement on www.st.com
EV-VND5E160J
8/8 Doc ID 023962 Rev 3
Please Read Carefully:
Informa tion in this do cument is prov ided solely in connec tion with ST products. STMic roelect ronics NV and its subsidiari es (“ST”) reser ve the
right to mak e chang es, c or recti ons , modif ic ations or improv ement s, t o th is documen t, and the prod ucts an d servic es des crib ed he rein a t any
time, without notice.
All ST produ cts are sold purs uant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, sele ct ion or use of the ST products and services described herein.
No license, express o r implied, by estoppel or otherwise , to any intellectual property righ ts is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST produ cts with provisions different fr om the statement s and/or technical features se t forth in this doc ument shall imme diately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liabili ty of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all informa tion previously supplied.
The ST logo is a registered t rademark of STMicroelectronics. All other names are the pro perty of their respective owners.
© 2013 STMicroelec tronics - All right s re se rv ed
STMicroelectronic s group of compani es
Australia - Belgiu m - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - Unit ed States of Americ a
www.st.com
