Original Creation Date: 07/11/96
Last Update Date: 04/27/99
Last Major Revision Date: 03/03/99
MN54ACTQ08-X REV 2A0 MICROCIRCUIT DATA SHEET
Quad 2-Input AND Gate
General Description
The ACTQ08 contains Four, 2- input AND gates and utilizes NSC Quiet Series technology to
guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet
Series TM features GTO TM output control and undershoot corrector in addition to a split
ground bus for superior ACMOS performance.
NS Part Numbers
54ACTQ08DMQB*
54ACTQ08FMQB**
54ACTQ08LMQB***
Industry Part Number
54ACTQ08
Prime Die
D008
Controlling Document
5962-89547
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25 C
2 Static tests at +125 C
3 Static tests at -55 C
4 Dynamic tests at +25 C
5 Dynamic tests at +125 C
6 Dynamic tests at -55 C
7 Functional tests at +25 C
8A Functional tests at +125 C
8B Functional tests at -55 C
9 Switching tests at +25 C
10 Switching tests at +125 C
11 Switching tests at -55 C
1
MICROCIRCUIT DATA SHEET
MN54ACTQ08-X REV 2A0
Features
- Icc reduced by 50%
- Guaranteed simultaneous switching noise level and dynamic threshold performance
- Improved latch-up immunity
- Minimum 4kV ESD protection
- Outputs source/sink 24 mA
- ACTQ08 has TTL-compatible inputs
- Standard Military Drawing (SMD)
- ACTQ08: 5962- 8954702CA*, DA**, 2A***
2
MICROCIRCUIT DATA SHEET
MN54ACTQ08-X REV 2A0
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc) -0.5V to +7.0V
DC Input Diode Current (Iik) -20 mAVi = -0.5V +20 mAVi = Vcc +0.5V
DC Input Voltage (Vi) -0.5V to Vcc +0.5V
DC Output Diode Current (Iok) -20 mAVo = -0.5V +20 mAVo = Vcc +0.5V
DC Output Voltage (Vo) -0.5V to Vcc +0.5V
DC Output Source or Sink Current (Io) +50 mA
DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA
Storage Temperature (Tstg) -65 C to +150 C
DC Latch-Up Source or Sink Current +300 mA
Junction Temperature (Tj) 175 CCDIP
Note 1: Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
(Note 1)
Supply Voltage (Vcc) 4.5V to 5.5V
Input Voltage (Vi) 0V to Vcc
Output Voltage (Vo) 0V to Vcc
Operating Temperature (Ta) -55 C to +125 C
Minimum Input Edge Rate (Delta V/Delta T)
ACTQ Devices
Vin from 0.8V to 2.0V 125 mV/nsVcc @ 4.5V 5.5V
Note 1: PLCC packaging is not recommended for applications requiring greater than 2000
temperature cycles from -40C to + 125C.
3
MN54ACTQ08-X REV 2A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
IIH High Level input
Current VCC=5.5V, VIH=5.5V 1, 2 INPUT 0.1 uA 1
1, 2 INPUT 1.0 uA 2, 3
IIL Low Level input
Current VCC=5.5V, VIL=0.0V 1, 2 INPUT -0.1 uA 1
1, 2 INPUT -1.0 uA 2, 3
VOL Low level output
voltage VCC=4.5V, VIH=2.0V, VIL=0.8V,
IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,
3
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,
3
VCC=4.5V, VIH=2.0V, VIL=0.8V,
IOL=24.0mA 1, 2 OUTPUT .36 V 1
1, 2 OUTPUT .50 V 2, 3
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOL=24.0mA 1, 2 OUTPUT .36 V 1
1, 2 OUTPUT .50 V 2, 3
VIOL Dynamic Output
Current LOW VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOL=50.0mA 1,
2, 5 OUTPUT 1.65 V 1, 2,
3
VOH High Level Output
Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V,
IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2,
3
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2,
3
VCC=4.5V, VIH=2.0V, VIL=0.8V,
IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1
1, 2 OUTPUT 3.70 V 2, 3
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOH=-24.0mA 1, 2 OUTPUT 4.86 V 1
1, 2 OUTPUT 4.70 V 2, 3
VIOH Dynamic Output
Current High VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOH=-50.0mA 1,
2, 5 OUTPUT 3.85 V 1, 2,
3
ICCH Supply Current VCC=5.5V, VIH=5.5V 1, 2 VCC 2.0 uA 1
1, 2 VCC 40 uA 2, 3
ICCL Supply Current VCC=5.5V, VIH=0.0V 1, 2 VCC 2.0 uA 1
1, 2 VCC 40 uA 2, 3
ICCT Supply Current VCC=5.5V, VIH=3.4V 1, 2 VCC 1.0 mA 1
1, 2 VCC 1.6 mA 2, 3
VIKL VCC=4.5V, IKL=-18mA 1, 2 INPUT -1.2 V 1, 2,
3
VIKH VCC=4.5V, IKH=18mA 1, 2 INPUT 5.7 V 1, 2,
3
4
MN54ACTQ08-X REV 2A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
VILD Maximum Low
Level Dynamic
Input Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT 0.8 V 4
VIHD Minimum High
Level Dynamic
Input Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT 2.2 V 4
VOLP Quiet Output
Maximum Dynamic
VOL
VCC=5.0V, LOAD 50pF / 500 OHMS 6, 8 OUTPUT 1.5 V 4
VOLV Quiet Output
Minimum Dynamic
VOL
VCC=5.0V, LOAD 50pF / 500 OHMS 6, 8 OUTPUT -1.2 V 4
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR=3.0ns & TF=3.0ns, Temp Range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP
11 IS GUARANTEED BUT NOT TESTED.
tpLH Propagation Delay VCC=4.5V 3,
4, 7 An/Bn
to On 1.5 7.0 ns 9
3,
4, 7 An/Bn
to On 1.5 7.5 ns 10, 11
tpHL Propagation Delay VCC=4.5V 3,
4, 7 An/Bn
to On 1.5 7.0 ns 9
3,
4, 7 An/Bn
to On 1.5 7.5 ns 10, 11
tOSLH Output to Output
Skew VCC=4.5V 6 On to
On 1.0 ns 9, 10,
11
tOSHL Output to Output
Skew VCC=4.5V 6 On to
On 1.0 ns 9, 10,
11
Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
Note 2: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
Note 3: SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9.
Note 4: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
Note 5: TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX.
Note 6: GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA)
Note 7: +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS.
Note 8: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOL.
Note 9: MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V.
INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1
MHZ.
5
MICROCIRCUIT DATA SHEET
MN54ACTQ08-X REV 2A0
Revision History
Rev ECN # Rel Date Originator Changes
2A0 M0003293 04/27/99 Linda Collins Changed the VIOH test conditions from VIH=2.0V to
VIH=5.5V and VIL=0.8V to VIL=0.0V. Changed IOL to IOH
in the VOH test condition.
6
