19-4231; Rev 0; 8/08 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain Packaged in a 1mm x 1mm UCSPTM with 4 bumps, the MAX9519 is an ultra-small standard-definition video filter amplifier with automatic shutdown. The automatic shutdown circuitry eliminates the need for a shutdown control. This feature provides intelligent power management by disabling the filter and output amplifier in the absence of a video input signal and/or an output video load. At shutdown, the device consumes only 1.8A. The MAX9519 features an internal reconstruction filter that smooths the steps and reduces the spikes on the video signal from the video digital-to-analog converter (DAC). The reconstruction filter typically has 1dB passband flatness to 9MHz and typically 48.5dB of attenuation at 27MHz. The video input to the MAX9519 can be directly connected to the DAC output. The MAX9519 has an internal fixed gain of 4V/V and expects a nominal full-scale video input signal of 0.5VP-P. The MAX9519 is specified to operate over the -40C to +125C automotive temperature range. Features o Ultra-Small, 4-Bump, 1mm x 1mm UCSP o Automatic Shutdown o DC-Coupled Input and Output o 2.7V to 3.6V Single-Supply Operation o Reconstruction Filter with 9MHz Passband and 48.5dB Attenuation at 27MHz o 1.8A Shutdown Supply Current Ordering Information PART PIN-PACKAGE TOP MARK MAX9519ARS+T 4 UCSP AAA Note: This device is specified over the -40C to +125C operating temperature range. +Denotes a lead-free/RoHS-compliant package. T = Tape and reel. Applications Pin Configuration TOP VIEW (BUMPS FACING DOWN) 1 2 GND OUT Mobile Phones A Digital Still Cameras (DSC) Digital Video Camcorders (DVC) MAX9519 Portable or Space-Constrained Applications B IN VDD UCSP (1mm x 1mm) UCSP is a trademark of Maxim Integrated Products, Inc. Block Diagram MAX9519 0mV TO 25mV AUTOMATIC SHUTDOWN CONTROL LOGIC 300mV TO 400mV 0.5VP-P VIDEO IN LPF AV = 4V/V 2VP-P VIDEO OUT BUFFER ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX9519 General Description MAX9519 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain ABSOLUTE MAXIMUM RATINGS (Voltages with respect to GND.) VDD .................................................................................0 to +4V IN ............................................................................. -0.3V to +4V OUT (during shutdown)............................. -0.3V to +VDD + 0.3V Continuous Current IN ...................................................................................20mA Continuous Power Dissipation (TA = +70C) 4-Bump UCSP (derate 3mW/C above +70C).............239mW Maximum Output Current OUT ................................................................................100mA Operating Temperature Range .........................-40C to +125C Junction Temperature ......................................................+150C Storage Temperature Range .............................-65C to +150C Bump Temperature (soldering) Infrared (15s) ................................................................+220C Vapor Phase (60s) ........................................................+215C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = 3.3V, video output has RL = 150 connected to GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Supply Voltage Range Supply Current SYMBOL VDD CONDITIONS Guaranteed by PSRR test Automatic shutdown mode No load, IN does not have an active video signal Active-detect mode No load, IN has a black-burst video signal with a sync tip at GND IDD MIN TYP 2.7 1.8 MAX UNITS 3.6 V 4 A 5.4 RL = 150 connected to GND, IN has a black-burst video signal with a sync tip, quiescent current only; no load current is included 2.9 4.8 mA 3.0 %VDD 200 AUTOMATIC SHUTDOWN Minimum Line Frequency 7.3 Sync Slice Level 1.7 kHz Output Load Detect Threshold DC CHARACTERISTICS Guaranteed by output-voltage swing Input Voltage Range Input Current IB Input Resistance RIN DC Voltage Gain AV Output Level Output-Voltage Swing 2 2.7V VDD 3.6V 0 0.525 3.0V VDD 3.6V 0 0.6 IN = GND 1 5 20 V A M Guaranteed by output-voltage swing (Note 2) 3.92 4 4.08 V/V IN = GND 0.18 0.325 0.475 V VDD = 2.7V, 0 VIN 0.525V 2.058 2.1 2.145 VDD = 3.0V, 0 VIN 0.6V 2.352 Measured at output VP-P 2.4 _______________________________________________________________________________________ 2.450 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain (VDD = 3.3V, video output has RL = 150 connected to GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Resistance SYMBOL ROUT MIN VOUT = 1.3V, -5mA ILOAD +5mA TYP PSRR 2.7V VDD 3.6V, VIN = 150mV MAX 1 42 UNITS 0.47 IN does not have active video signal, VOUT = 1.1V Output Leakage Current Power-Supply Rejection Ratio CONDITIONS A 65 dB 9 MHz AC CHARACTERISTICS 1dB passband flatness Standard-Definition Reconstruction Filter VIN = 0.5VP-P, reference frequency is 1MHz Differential Gain DG Differential Phase DP -0.15 f = 10.5MHz -3 f = 27MHz 0.6 f = 4.43MHz 0.45 f = 3.58MHz 0.85 f = 4.43MHz 0.9 100kHz f 5MHz Peak Signal to RMS Noise PSRR f = 100kHz, 200mVP-P dB -48.5 f = 3.58MHz 100kHz f 5MHz, VOUT = 2VP-P Group-Delay Distortion Power-Supply Rejection Ratio f = 5.5MHz 5 % Degrees ns 71.9 dB 45 dB 2T Pulse Response 2T = 200ns 0.25 K% 2T Pulse-to-Bar K Rating 2T = 200ns, bar time is 18s; the beginning 2.5% and the ending 2.5% of the bar time is ignored 0.2 K% 2T Bar Response 2T = 200ns, bar time is 18s; the beginning 2.5% and the ending 2.5% of the bar time is ignored 0.3 K% Nonlinearity 5-step staircase 0.1 % Output Impedance f = 5MHz 6 Note 1: All devices are 100% production tested at TA = +25C. Specifications over temperature limits are guaranteed by design. Note 2: Voltage gain (AV) is a two-point measurement in which the output-voltage swing is divided by the input-voltage swing. _______________________________________________________________________________________ 3 MAX9519 ELECTRICAL CHARACTERISTICS (continued) Typical Operating Characteristics (VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL = 150 connected to GND, TA = +25C, unless otherwise noted.) 0 -20 -30 -40 -50 VOUT = 2VP-P 0 -1 -2 -3 -4 -5 1 100 10 -40 0.1 1 0.1 100 10 1 100 10 FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz) LARGE-SIGNAL GAIN FLATNESS vs. FREQUENCY GROUP DELAY vs. FREQUENCY POWER-SUPPLY REJECTION RATIO vs. FREQUENCY VOUT = 2VP-P 100 0 MAX9519 toc06 0 120 MAX9519 toc05 VOUT = 2VP-P 1 MAX9519 toc04 2 VDD = 3.3V VRIPPLE = 200mVP-P -10 -20 -1 -2 -3 -4 PSRR (dB) DELAY (ns) 80 60 -30 -40 -50 40 -5 -60 -6 20 -70 -7 -8 -80 0 0.1 1 100 10 1 10 0.1 100 1 FREQUENCY (MHz) QUIESCENT SUPPLY CURRENT vs. TEMPERATURE VOLTAGE GAIN vs. TEMPERATURE OUTPUT VOLTAGE vs. INPUT VOLTAGE 2.6 4.02 4.01 4.00 3.99 3.98 MAX9519 toc09 3.0 OUTPUT VOLTAGE (V) 4.03 VOLTAGE GAIN (V/V) 2.7 VIN = 600mV VDD = 3.0V 4.04 3.5 MAX9519 toc08 MAX9519 toc07 4.05 100 10 FREQUENCY (MHz) VIN = BLACK VIDEO SIGNAL RL = 150 ISUPPLY = IDD - IOUT 2.8 0.1 FREQUENCY (MHz) 2.9 2.5 2.0 1.5 1.0 3.97 2.5 0.5 3.96 3.95 2.4 -50 -25 0 25 50 75 TEMPERATURE (C) 4 -30 -70 -8 0.1 -20 -60 -7 -70 -10 -50 -6 -60 NORMALIZED GAIN (dB) 10 NORMALIZED GAIN (dB) -10 VOUT = 100mVP-P 1 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 0 2 MAX9519 toc02 VOUT = 100mVP-P MAX9519 toc01 10 LARGE-SIGNAL GAIN vs. FREQUENCY SMALL-SIGNAL GAIN FLATNESS vs. FREQUENCY MAX9519 toc03 SMALL-SIGNAL GAIN vs. FREQUENCY SUPPLY CURRENT (mA) MAX9519 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain 100 125 0 -50 -25 0 25 50 75 TEMPERATURE (C) 100 125 0 0.2 0.4 0.6 INPUT VOLTAGE (V) _______________________________________________________________________________________ 0.8 1.0 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain 1 2 3 4 5 0.4 6 7 f = 3.58MHz 0.2 0 -0.2 -0.4 -0.6 1 2 3 4 5 6 7 0.4 0.3 0.2 0.1 0 -0.1 -0.2 2T RESPONSE MAX9519 toc12 MAX9519 toc11 f = 3.58MHz DIFFERENTIAL GAIN (%) MAX9519 toc10 0.6 0.5 0.4 0.3 0.2 0.1 0 -0.1 DIFFERENTIAL GAIN AND PHASE DIFFERENTIAL PHASE (deg) DIFFERENTIAL PHASE (deg) DIFFERENTIAL GAIN (%) DIFFERENTIAL GAIN AND PHASE f = 4.43MHz 1 2 3 4 5 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 6 IN 100mV/div 7 f = 4.43MHz 1 12.5T RESPONSE 2 3 4 5 6 OUT 400mV/div 7 100ns/div PAL MULTIBURST RESPONSE NTC-7 VIDEO TEST SIGNAL MAX9519 toc13 MAX9519 toc15 MAX9519 toc14 IN 100mV/div IN 200mV/div IN 200mV/div OUT 800mV/div OUT 400mV/div 400ns/div OUT 800mV/div 10s/div 10s/div PAL COLOR BARS FIELD SQUARE-WAVE RESPONSE MAX9519 toc16 MAX9519 toc17 IN 200mV/div IN 200mV/div OUT 800mV/div 10s/div MAX9519 Typical Operating Characteristics (continued) (VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL = 150 connected to GND, TA = +25C, unless otherwise noted.) OUT 800mV/div 2ms/div _______________________________________________________________________________________ 5 MAX9519 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain Typical Operating Characteristics (continued) (VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL = 150 connected to GND, TA = +25C, unless otherwise noted.) DISABLE TIME ENABLE TIME MAX9519 toc19 MAX9519 toc18 IN 500mV/div IN 500mV/div OUT 500mV/div OUT 500mV/div 40s/div 10s/div Pin Description PIN NAME A1 GND Ground A2 OUT Video Output B1 IN B2 VDD FUNCTION Video Input Positive Power Supply. Bypass VDD with a 0.1F capacitor to ground. +3.3V 1.8A VDD MAX9519 AUTOMATIC SHUTDOWN CONTROL LOGIC NO VIDEO SIGNAL VIDEO ENCODER CURRENT DAC IN AV = 4V/V LPF OUT 75 BUFFER GND Figure 1. Automatic Shutdown 6 _______________________________________________________________________________________ 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain MAX9519 +3.3V 5.4A VDD 0 TO 25mV 0.5VP-P VIDEO MAX9519 AUTOMATIC SHUTDOWN CONTROL LOGIC VIDEO SIGNAL PRESENT VIDEO ENCODER CURRENT DAC IN AV = 4V/V LPF OUT 75 NO LOAD BUFFER GND Figure 2. Active-Detect Mode Detailed Description The MAX9519 is an ultra-small, standard-definition video filter amplifier with automatic shutdown. Automatic shutdown circuitry provides intelligent power management by disabling the filter and output amplifier in the absence of an input video signal and/or output load. Figure 1 shows automatic shutdown. An internal reconstruction filter smooths the steps and reduces the spikes on the video signal from the video digital-to-analog converter. The reconstruction filter typically has 1dB passband flatness to 9MHz and typically 48.5dB of attenuation at 27MHz. The MAX9519 has an internal fixed gain of 4V/V and expects a nominal full-scale video input signal of 0.5VP-P. Automatic Shutdown The MAX9519 automatic shutdown circuitry reduces power consumption when there is no active video input signal or an output load. In shutdown, the supply current is reduced to 1.8A. The video amplifier only turns on when both an active video input signal and an output load are present. The MAX9519 slices the IN signal at 2.4% of the power supply (80mV for a 3.3V supply). If the transitions occur at a rate of 7.3kHz or higher, a video signal is present. When the MAX9519 detects a video signal with sync at the input, the control logic enters the active-detect mode and enables the load sense circuitry (Figure 2). The supply current increases from 1.8A to 5.4A typically. If an output load is not connected to the amplifier, the MAX9519 remains in active-detect mode. Eight times per second, the load-sense circuit checks for a load by connecting an internal 15k pullup resistor to the output for 1ms. If the output is pulled up, no load is present. If the output stays low, a load is connected. If the input video signal is present and a load is connected to the output, the filter and amplifier turn on and remain on until the output load is disconnected. Automatic shutdown intelligently reduces the supply current based on the input signal presence and output loading (Figure 3). When the amplifier is on, it continually checks if the load has been disconnected by detecting if the amplifier output is sourcing current during a horizontal line time. If no sourcing current is detected within one horizontal line time (approximately 64s), the load has been disconnected and the amplifier returns to activedetect mode. If, at any time, the input video signal is removed, the MAX9519 returns to standby mode. _______________________________________________________________________________________ 7 MAX9519 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain +3.3V 2.9mA QUIESCENT SUPPLY CURRENT NOT INCLUDING OUTPUT LOAD CURRENT VDD 0 TO 25mV 0.5VP-P VIDEO MAX9519 AUTOMATIC SHUTDOWN CONTROL LOGIC VIDEO SIGNAL PRESENT VIDEO ENCODER CURRENT DAC IN AV = 4V/V LPF OUT 75 BUFFER 75 GND Figure 3. Full-Operation Mode Input Output The MAX9519 video input should be directly connected to the output of the video current DAC. DC-coupling ensures that the input signal is ground referenced such that the sync tip of the composite video signal is within 25mV of ground. Any standard-definition video signal can be applied to the input as long as the signal is between ground and 0.525V when VDD = 2.7V. The MAX9519 output expects to drive a DC-coupled load to ground. The amplifier output stage needs about 300mV of headroom from either supply rail. The device has an internal level shift circuit that positions the sync tip at approximately 300mV at the output. Video Reconstruction Filter The filter passband (1dB) is typically 9MHz, which makes the device suitable for standard-definition video signals from all sources (e.g., broadcast and DVD). Broadcast video signals are channel limited: NTSC signals have 4.2MHz bandwidth, and PAL signals have 5MHz of bandwidth. Video signals from a DVD player, however, are not channel limited; so the bandwidth of DVD video signals approaches the Nyquist limit of 6.75MHz. Recommendation: ITU-R BT.601-5 specifies 13.5MHz as the sampling rate for standard-definition video. Therefore, the maximum bandwidth of the signal is 6.75MHz. To ease the filtering requirements, most modern video systems over sample by two times, clocking the video current DAC at 27MHz. Applications Information Power-Supply Bypassing and Ground The MAX9519 operates from a single-supply voltage down to 2.7V, allowing for low-power operation. Bypass VDD to GND with a 0.1F capacitor. Place all external components as close as possible to the device. UCSP Applications Information For the latest application details on UCSP construction, dimensions, tape carrier information, PCB techniques, bump-pad layout, and recommended reflow temperature profile, as well as the latest information on reliability testing results, go to the Maxim's website at www.maxim-ic.com/ucsp to find the Application Note 1891: Understanding the Basics of the Wafer-Level Chip-Scale Package (WL-CSP). Chip Information PROCESS: BiCMOS 8 _______________________________________________________________________________________ 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 4V/V Gain 2x2 UCSP.EPS PACKAGE TYPE PACKAGE CODE DOCUMENT NO. 4 UCSP R41A1+1 21-0242 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 9 (c) 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. MAX9519 Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX9519ARS+T