General Description
Packaged in a 1mm x 1mm UCSP™ with 4 bumps, the
MAX9519 is an ultra-small standard-definition video fil-
ter amplifier with automatic shutdown.
The automatic shutdown circuitry eliminates the need
for a shutdown control. This feature provides intelligent
power management by disabling the filter and output
amplifier in the absence of a video input signal and/or
an output video load. At shutdown, the device con-
sumes only 1.8µA.
The MAX9519 features an internal reconstruction filter
that smooths the steps and reduces the spikes on the
video signal from the video digital-to-analog converter
(DAC). The reconstruction filter typically has ±1dB
passband flatness to 9MHz and typically 48.5dB of
attenuation at 27MHz.
The video input to the MAX9519 can be directly con-
nected to the DAC output. The MAX9519 has an inter-
nal fixed gain of 4V/V and expects a nominal full-scale
video input signal of 0.5VP-P. The MAX9519 is specified
to operate over the -40°C to +125°C automotive tem-
perature range.
Applications
Mobile Phones
Digital Still Cameras (DSC)
Digital Video Camcorders (DVC)
Portable or Space-Constrained Applications
Features
oUltra-Small, 4-Bump, 1mm x 1mm UCSP
oAutomatic Shutdown
oDC-Coupled Input and Output
o2.7V to 3.6V Single-Supply Operation
oReconstruction Filter with 9MHz Passband and
48.5dB Attenuation at 27MHz
o1.8µA Shutdown Supply Current
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
________________________________________________________________
Maxim Integrated Products
1
Ordering Information
AV = 4V/V OUTIN
BUFFER
LPF
AUTOMATIC
SHUTDOWN
CONTROL LOGIC
MAX9519
0mV
TO
25mV
300mV
TO
400mV
0.5VP-P VIDEO
2VP-P VIDEO
Block Diagram
OUT
VDD
IN
GND
12
A
B
MAX9519
UCSP
(1mm × 1mm)
TOP VIEW
(BUMPS FACING DOWN)
Pin Configuration
19-4231; Rev 0; 8/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
PART PIN-PACKAGE
TOP MARK
MAX9519ARS+T 4 UCSP AAA
Note: This device is specified over the -40°C to +125°C operat-
ing temperature range.
+
Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.
UCSP is a trademark of Maxim Integrated Products, Inc.
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VDD = 3.3V, video output has RL= 150Ωconnected to GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(Voltages with respect to GND.)
VDD .................................................................................0 to +4V
IN ............................................................................. -0.3V to +4V
OUT (during shutdown)............................. -0.3V to +VDD + 0.3V
Continuous Current
IN ...................................................................................±20mA
Continuous Power Dissipation (TA= +70°C)
4-Bump UCSP (derate 3mW/°C above +70°C).............239mW
Maximum Output Current
OUT ................................................................................±100mA
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Bump Temperature (soldering)
Infrared (15s) ................................................................+220°C
Vapor Phase (60s) ........................................................+215°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage Range VDD Guaranteed by PSRR test 2.7 3.6 V
Automatic shutdown
mode
No load, IN does not
have an active video
signal
1.8 4
Active-detect mode
No load, IN has a
black-burst video
signal with a sync tip
at GND
5.4
µA
Supply Current IDD
RL = 150Ω connected to GND, IN has a
black-burst video signal with a sync tip,
quiescent current only; no load current is
included
2.9 4.8 mA
AUTOMATIC SHUTDOWN
Minimum Line Frequency 7.3 kHz
Sync Slice Level 1.7 3.0 %VDD
Output Load Detect Threshold 200 Ω
DC CHARACTERISTICS
2.7V ≤ VDD ≤ 3.6V 0 0.525
Input Voltage Range Guaranteed by
output-voltage swing 3.0V ≤ VDD ≤ 3.6V 0 0.6 V
Input Current IBIN = GND 1 5 µA
Input Resistance RIN 20 MΩ
DC Voltage Gain AVG uar anteed b y outp ut- vol tag e sw i ng ( N ote 2) 3.92 4 4.08 V/V
Output Level IN = GND 0.18 0.325 0.475 V
VDD = 2.7V,
0 ≤ VIN ≤ 0.525V 2.058 2.1 2.145
Output-Voltage Swing Measured at output
VDD = 3.0V,
0 ≤ VIN ≤ 0.6V 2.352 2.4 2.450
VP-P
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
_______________________________________________________________________________________ 3
Note 1: All devices are 100% production tested at TA= +25°C. Specifications over temperature limits are guaranteed by design.
Note 2: Voltage gain (AV) is a two-point measurement in which the output-voltage swing is divided by the input-voltage swing.
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Output Resistance ROUT VOUT = 1.3V, -5mA ≤ ILOAD ≤ +5mA 0.47 Ω
Output Leakage Current IN does not have active video signal,
VOUT = 1.1V 1µA
Power-Supply Rejection Ratio PSRR 2.7V ≤ VDD ≤ 3.6V, VIN = 150mV 42 65 dB
AC CHARACTERISTICS
±1dB passband flatness 9 MHz
f = 5.5MHz -0.15
f = 10.5MHz -3
Standard-Definition
Reconstruction Filter
VIN = 0.5VP-P,
reference frequency
is 1MHz f = 27MHz -48.5
dB
f = 3.58MHz 0.6
Differential Gain DG f = 4.43MHz 0.45 %
f = 3.58MHz 0.85
Differential Phase DP f = 4.43MHz 0.9 D eg r ees
Group-Delay Distortion 100kHz ≤ f ≤ 5MHz, VOUT = 2VP-P 5ns
Peak Signal to RMS Noise 100kHz ≤ f ≤ 5MHz 71.9 dB
Power-Supply Rejection Ratio PSRR f = 100kHz, 200mVP-P 45 dB
2T Pulse Response 2T = 200ns 0.25 K%
2T Pulse-to-Bar K Rating
2T = 200ns, bar time is 18µs; the beginning
2.5% and the ending 2.5% of the bar time is
ignored
0.2 K%
2T Bar Response
2T = 200ns, bar time is 18µs; the beginning
2.5% and the ending 2.5% of the bar time is
ignored
0.3 K%
Nonlinearity 5-step staircase 0.1 %
Output Impedance f = 5MHz 6 Ω
ELECTRICAL CHARACTERISTICS (continued)
(VDD = 3.3V, video output has RL= 150Ωconnected to GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Note 1)
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
4 _______________________________________________________________________________________
SMALL-SIGNAL GAIN
vs. FREQUENCY
MAX9519 toc01
FREQUENCY (MHz)
NORMALIZED GAIN (dB)
101
-60
-50
-40
-30
-20
-10
0
10
-70
0.1 100
VOUT = 100mVP-P
SMALL-SIGNAL GAIN FLATNESS
vs. FREQUENCY
MAX9519 toc02
FREQUENCY (MHz)
NORMALIZED GAIN (dB)
101
-7
-6
-5
-4
-3
-2
-1
0
1
2
-8
0.1 100
VOUT = 100mVP-P
LARGE-SIGNAL GAIN
vs. FREQUENCY
MAX9519 toc03
FREQUENCY (MHz)
NORMALIZED GAIN (dB)
101
-60
-50
-40
-30
-20
-10
0
10
-70
0.1 100
VOUT = 2VP-P
LARGE-SIGNAL GAIN FLATNESS
vs. FREQUENCY
MAX9519 toc04
FREQUENCY (MHz)
NORMALIZED GAIN (dB)
101
-7
-6
-5
-4
-3
-2
-1
0
1
2
-8
0.1 100
VOUT = 2VP-P
GROUP DELAY
vs. FREQUENCY
MAX9519 toc05
FREQUENCY (MHz)
DELAY (ns)
101
40
20
60
80
100
120
0
0.1 100
VOUT = 2VP-P
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
MAX9519 toc06
FREQUENCY (MHz)
PSRR (dB)
101
-70
-60
-50
-40
-30
-20
-10
0
-80
0.1 100
VDD = 3.3V
VRIPPLE = 200mVP-P
QUIESCENT SUPPLY CURRENT
vs. TEMPERATURE
MAX9519 toc07
TEMPERATURE (°C)
SUPPLY CURRENT (mA)
1007550250-25
2.5
2.6
2.7
2.8
2.9
2.4
-50 125
VIN = BLACK VIDEO SIGNAL
RL = 150Ω
ISUPPLY = IDD - IOUT
VOLTAGE GAIN
vs. TEMPERATURE
MAX9519 toc08
TEMPERATURE (°C)
VOLTAGE GAIN (V/V)
1007525 500-25
3.96
3.97
3.98
3.99
4.00
4.01
4.02
4.03
4.04
4.05
3.95
-50 125
VIN = 600mV
VDD = 3.0V
OUTPUT VOLTAGE
vs. INPUT VOLTAGE
MAX9519 toc09
INPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
0.80.60.40.2
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
01.0
Typical Operating Characteristics
(VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL= 150Ωconnected to GND, TA= +25°C, unless otherwise noted.)
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
_______________________________________________________________________________________
5
DIFFERENTIAL GAIN
AND PHASE
MAX9519 toc10
DIFFERENTIAL GAIN
(%)
DIFFERENTIAL PHASE
(deg)
65432
0
0.4
0.2
0.3
0.2
-0.2
-0.4
-0.6
0.1
0
-0.1
0.5
0.4
0.6
17
6543217
f = 3.58MHz
f = 3.58MHz
DIFFERENTIAL GAIN
AND PHASE
MAX9519 toc11
DIFFERENTIAL GAIN
(%)
DIFFERENTIAL PHASE
(deg)
65432
0.2
0.6
0.4
0.1
0
0
-0.2
-0.4
-0.6
-0.1
-0.2
0.3
0.2
0.4
17
6543217
f = 4.43MHz
f = 4.43MHz
2T RESPONSE
MAX9519 toc12
100ns/div
IN
100mV/div
OUT
400mV/div
12.5T RESPONSE
MAX9519 toc13
400ns/div
IN
100mV/div
OUT
400mV/div
NTC-7 VIDEO TEST SIGNAL
MAX9519 toc14
10μs/div
IN
200mV/div
OUT
800mV/div
PAL MULTIBURST RESPONSE
MAX9519 toc15
10μs/div
IN
200mV/div
OUT
800mV/div
Typical Operating Characteristics (continued)
(VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL= 150Ωconnected to GND, TA= +25°C, unless otherwise noted.)
PAL COLOR BARS
MAX9519 toc16
10μs/div
IN
200mV/div
OUT
800mV/div
FIELD SQUARE-WAVE RESPONSE
MAX9519 toc17
2ms/div
IN
200mV/div
OUT
800mV/div
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
6 _______________________________________________________________________________________
Pin Description
PIN NAME FUNCTION
A1 GND Ground
A2 OUT Video Output
B1 IN Video Input
B2 VDD Positive Power Supply. Bypass VDD with a 0.1µF capacitor to ground.
CURRENT
DAC
VIDEO ENCODER
NO VIDEO
SIGNAL
AV = 4V/V OUTIN
BUFFER
LPF
AUTOMATIC
SHUTDOWN
CONTROL LOGIC
MAX9519
VDD
+3.3V
GND
1.8μA
75Ω
Figure 1. Automatic Shutdown
DISABLE TIME
MAX9519 toc19
40μs/div
IN
500mV/div
OUT
500mV/div
ENABLE TIME
MAX9519 toc18
10μs/div
IN
500mV/div
OUT
500mV/div
Typical Operating Characteristics (continued)
(VDD = 3.3V, GND = 0V, DC-coupled input, video output has RL= 150Ωconnected to GND, TA= +25°C, unless otherwise noted.)
Detailed Description
The MAX9519 is an ultra-small, standard-definition video
filter amplifier with automatic shutdown. Automatic shut-
down circuitry provides intelligent power management
by disabling the filter and output amplifier in the
absence of an input video signal and/or output load.
Figure 1 shows automatic shutdown.
An internal reconstruction filter smooths the steps and
reduces the spikes on the video signal from the video
digital-to-analog converter. The reconstruction filter typ-
ically has ±1dB passband flatness to 9MHz and typi-
cally 48.5dB of attenuation at 27MHz. The MAX9519
has an internal fixed gain of 4V/V and expects a nomi-
nal full-scale video input signal of 0.5VP-P.
Automatic Shutdown
The MAX9519 automatic shutdown circuitry reduces
power consumption when there is no active video input
signal or an output load. In shutdown, the supply cur-
rent is reduced to 1.8µA. The video amplifier only turns
on when both an active video input signal and an out-
put load are present.
The MAX9519 slices the IN signal at 2.4% of the power
supply (80mV for a 3.3V supply). If the transitions occur
at a rate of 7.3kHz or higher, a video signal is present.
When the MAX9519 detects a video signal with sync at
the input, the control logic enters the active-detect mode
and enables the load sense circuitry (Figure 2). The sup-
ply current increases from 1.8µA to 5.4µA typically.
If an output load is not connected to the amplifier, the
MAX9519 remains in active-detect mode. Eight times
per second, the load-sense circuit checks for a load by
connecting an internal 15kΩpullup resistor to the out-
put for 1ms. If the output is pulled up, no load is pre-
sent. If the output stays low, a load is connected.
If the input video signal is present and a load is con-
nected to the output, the filter and amplifier turn on and
remain on until the output load is disconnected.
Automatic shutdown intelligently reduces the supply
current based on the input signal presence and output
loading (Figure 3).
When the amplifier is on, it continually checks if the
load has been disconnected by detecting if the amplifi-
er output is sourcing current during a horizontal line
time. If no sourcing current is detected within one hori-
zontal line time (approximately 64µs), the load has
been disconnected and the amplifier returns to active-
detect mode. If, at any time, the input video signal is
removed, the MAX9519 returns to standby mode.
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
_______________________________________________________________________________________ 7
CURRENT
DAC
VIDEO ENCODER
VIDEO SIGNAL
PRESENT
AV = 4V/V OUT
NO LOAD
IN
BUFFER
LPF
AUTOMATIC
SHUTDOWN
CONTROL LOGIC
MAX9519
VDD
+3.3V
5.4μA
75Ω
GND
0
TO
25mV 0.5VP-P VIDEO
Figure 2. Active-Detect Mode
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
8 _______________________________________________________________________________________
Input
The MAX9519 video input should be directly connected
to the output of the video current DAC. DC-coupling
ensures that the input signal is ground referenced such
that the sync tip of the composite video signal is within
25mV of ground. Any standard-definition video signal
can be applied to the input as long as the signal is
between ground and 0.525V when VDD = 2.7V.
Video Reconstruction Filter
The filter passband (±1dB) is typically 9MHz, which
makes the device suitable for standard-definition video
signals from all sources (e.g., broadcast and DVD).
Broadcast video signals are channel limited: NTSC sig-
nals have 4.2MHz bandwidth, and PAL signals have
5MHz of bandwidth. Video signals from a DVD player,
however, are not channel limited; so the bandwidth of
DVD video signals approaches the Nyquist limit of
6.75MHz. Recommendation: ITU-R BT.601-5 specifies
13.5MHz as the sampling rate for standard-definition
video. Therefore, the maximum bandwidth of the signal
is 6.75MHz. To ease the filtering requirements, most
modern video systems over sample by two times,
clocking the video current DAC at 27MHz.
Output
The MAX9519 output expects to drive a DC-coupled
load to ground. The amplifier output stage needs about
300mV of headroom from either supply rail. The device
has an internal level shift circuit that positions the sync
tip at approximately 300mV at the output.
Applications Information
Power-Supply Bypassing and Ground
The MAX9519 operates from a single-supply voltage
down to 2.7V, allowing for low-power operation. Bypass
VDD to GND with a 0.1µF capacitor. Place all external
components as close as possible to the device.
UCSP Applications Information
For the latest application details on UCSP construction,
dimensions, tape carrier information, PCB techniques,
bump-pad layout, and recommended reflow tempera-
ture profile, as well as the latest information on reliability
testing results, go to the Maxim’s website at
www.maxim-ic.com/ucsp to find the Application Note
1891:
Understanding the Basics of the Wafer-Level
Chip-Scale Package (WL-CSP).
CURRENT
DAC
VIDEO ENCODER
VIDEO SIGNAL
PRESENT
AV = 4V/V OUTIN
BUFFER
LPF
AUTOMATIC
SHUTDOWN
CONTROL LOGIC
2.9mA QUIESCENT SUPPLY CURRENT NOT INCLUDING OUTPUT LOAD CURRENT
MAX9519
VDD
+3.3V
75Ω
75Ω
GND
0
TO
25mV 0.5VP-P VIDEO
Figure 3. Full-Operation Mode
Chip Information
PROCESS: BiCMOS
MAX9519
1mm x 1mm Video Filter Amplifier with
Automatic Shutdown and 4V/V Gain
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________
9
© 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages.
MAX9519
2x2 UCSP.EPS
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
4 UCSP R41A1+1 21-0242
