Dimensions in inches and (millimeters)
Version: A06
LL4001G - LL4007G
1.0AMP Surface Mount
Glass Plassivated Silicon Rectifiers
MELF
Features
Plastic package has carries underwriters
Laboratory flammability classification 94V-0
Surge overload rating to 30 Ampers peak
Ideal for printed circuit board.
Reliable low cost construction utilizing molded
plastic technique results in in-expensive
product.
High temperature soldering guaranteed:
260oC / 10 seconds at terminals.
Mechanical Data
Solderability per MIL-STD-750, method 208 at
terminals.
Mounting position: Any
Weight: 0.12 gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol LL
4001G
LL
4002G
LL
4003G
LL
4004G
LL
4005G
LL
4006G
LL
4007G Units
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 75 oC I(AV) 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
IFSM 30 A
Maximum Instantaneous Forward Voltage
@1.0A VF 1.1 V
Maximum DC Reverse Current @ TA=25 oC
at Rated DC Blocking Voltage @ TA=125 oC IR 5
100
uA
uA
Typical Junction Capacitance ( Note 1 ) Cj 15 pF
Typical Thermal Resistance (Note 2) RθJC 50 oC/W
Operating and Storage Temperature Range TJ,TSTG - 65 to + 150 oC
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to case. Mount on 0.2” x 0.2” Cu-pad on P.C.B.
50
40
0
RATINGS AND CHARACTERISTIC CURVES (LL4001G THRU LL4007G)
1
0
Version: B12
