C O M P O N E N T S , C O N N E C TO R S & C A B L I N G G U I D E www.deltron-emcon.com for full technical specifications Please check out Series: Stud Mounting Bunch Pin Plug Suitable for PCB test points and shunt terminals Supplied with 2 fixing nuts (M4) Part Number Selection Stud Mounting 559-0010 Bunch Pin Plug Series: Panel Mounting Socket Available with solder tag or solder bucket connections Part Number Solder Selection Terminal Black 551-0100 Blue 551-0200 Brown 551-0300 Green 551-0400 Solder Bucket 563-0100 563-0200 563-0300 563-0400 Nickel plated plug Current rating 20 Amps Supplied with panel mounting retention nut Rated at 10 Amps Solder Solder Terminal Bucket Red 551-0500 563-0500 White 551-0600 563-0600 Yellow 551-0700 563-0700 Series: 90 PCB Mounted Insulated Socket - 4mm Hole Single and Double For direct mounting onto PCB's Grooves in the outer housing to provide side Rated at 10 Amps stacking alignment Part Number Single Double Single Double Selection Black 571-0100 572-0100 Red 571-0500 572-0500 Blue 571-0200 572-0200 White 571-0600 572-0600 Brown 571-0300 Yellow 571-0700 Green 571-0400 572-0400 Series: Insulated Terminal Incorporates a 4mm socket and rigid acetal moulding Rated at 30 Amps Part Number Single Selection Black 552-0100 Red 552-0200 White Blue Green 552-0400 Yellow Series: Spade Adaptor Brass nickel plated adaptor accepts 4mm plug Rated at 20 Amps Part Number Selection Black 536-0100 Red 536-0500 Series: Spade Terminal Brass nickel plated Accommodates a terminal diameter up to 8.3mm Rated at 20 Amps Part Number Single Selection Black 562-0100 Red Blue 562-0200 White Brown 562-0300 Yellow Green 562-0400 Terminal has a thread termination Single 552-0500 552-0600 552-0700 Accommodates terminal posts up to 8.3mm diameter Rigid acetal moulding which clamps the lead wire Single 562-0500 562-0600 562-0700