MUR3020WT, MUR3040WTG, MUR3060WT SWITCHMODEt Power Rectifiers http://onsemi.com These state-of-the-art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. ULTRAFAST RECTIFIERS 30 AMPERES, 200-600 VOLTS Features * * * * * * * * * * Ultrafast 35 and 60 Nanosecond Recovery Time 175C Operating Junction Temperature Popular TO-247 Package High Voltage Capability to 600 V Low Forward Drop Low Leakage Specified @ 150C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures Epoxy Meets UL 94 V-0 @ 0.125 in High Temperature Glass Passivated Junction Pb-Free Packages are Available* 1 2, 4 3 MARKING DIAGRAM Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 4.3 Grams (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads * * are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped 30 Units Per Plastic Tube 1 MUR30x0WT AYWWG 2 3 TO-247 CASE 340L PLASTIC MUR30x0WT = Device Code x = 2, 4 or 6 A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package ORDERING INFORMATION Device Package Shipping TO-247 30 Units/Rail MUR3020WTG TO-247 (Pb-Free) 30 Units/Rail MUR3040WTG TO-247 (Pb-Free) 30 Units/Rail TO-247 30 Units/Rail TO-247 (Pb-Free) 30 Units/Rail MUR3020WT MUR3060WT *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2010 March, 2010 - Rev. 5 1 MUR3060WTG Publication Order Number: MUR3020WT/D MUR3020WT, MUR3040WTG, MUR3060WT MAXIMUM RATINGS (Per Leg) Symbol MUR3020WT MUR3040WT MUR3060WT Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 400 600 V Average Rectified Forward Current @ 145C Total Device IF(AV) 15 30 A Peak Repetitive Surge Current (Rated VR, Square Wave, 20 kHz, TC = 145C) IFM 30 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM Rating Operating Junction and Storage Temperature 200 150 TJ, Tstg - 65 to +175 RqJC RqJA 1.5 40 150 A C THERMAL CHARACTERISTICS (Per Leg) Maximum Thermal Resistance, - Junction-to-Case - Junction-to-Ambient C/W ELECTRICAL CHARACTERISTICS (Per Leg) Maximum Instantaneous Forward Voltage (Note 1) (IF = 15 Amp, TC = 150C) (IF = 15 Amp, TC = 25C) VF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 150C) (Rated DC Voltage, TJ = 25C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 Amps/ms) trr 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. http://onsemi.com 2 0.85 1.05 1.12 1.25 1.4 1.7 500 10 500 10 1000 10 35 60 60 V mA ns MUR3020WT, MUR3040WTG, MUR3060WT MUR3020WT TJ = 150C 100 100C IR, REVERSE CURRENT ( A) 100 25C 50 30 10 100C 2 1 0.5 25C 0.2 0.1 0.05 0.02 0.01 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 5 3 0 1 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 14 dc 12 10 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 14 dc 12 RqJA = 15C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. 10 SQUARE WAVE 8 dc 6 4 SQUARE WAVE RqJA = 40C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 2 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (5C) 180 150 160 170 TC, CASE TEMPERATURE (5C) 180 Figure 3. Current Derating, Case (Per Leg) P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV), AVERAGE FORWARD CURRENT (AMPS) 40 16 Figure 1. Typical Forward Voltage (Per Leg) 0 20 Figure 2. Typical Reverse Current (Per Leg)* 2 I F(AV), AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 150C 50 20 10 5 200 16 (RESISTIVE LOAD) 14 12 (CAPACITIVE LOAD) 10 IPK = IAV IPK =5 IAV dc 10 8 20 6 SQUARE WAVE 4 TJ = 125C 2 0 0 Figure 4. Current Derating, Ambient (Per Leg) 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation (Per Leg) http://onsemi.com 3 16 MUR3020WT, MUR3040WTG, MUR3060WT MUR3040WTG IR, REVERSE CURRENT ( A) 100 50 100C TJ = 150C 30 25C 10 5 TJ = 150C 100C 25C 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0 50 100 150 200 250 300 350 400 450 5 VR, REVERSE VOLTAGE (VOLTS) 3 *The curves shown are typical for the highest voltage device in the voltage grouping Typical reverse current for lower voltage selections can be estimated from these sam curves if VR is sufficiently below rated VR. 2 Figure 7. Typical Reverse Current (Per Leg)* 1 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 Figure 6. Typical Forward Voltage (Per Leg) I F(AV), AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 20 100 50 20 10 5 16 14 dc 12 10 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 TC, CASE TEMPERATURE (C) 1 14 P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 8. Current Derating, Case (Per Leg) dc 12 10 8 6 SQUARE WAVE RJA = 15C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. dc 4 SQUARE WAVE 2 RJA = 40C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (C) 180 200 16 (RESISTIVE-INDUCTIVE LOAD) 14 (CAPACITIVE LOAD) 12 IPK =5 IAV 10 IPK = IAV dc 10 20 SQUARE WAVE 8 6 4 TJ = 125C 2 0 0 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg) http://onsemi.com 4 MUR3020WT, MUR3040WTG, MUR3060WT MUR3060WT 200 100 50 IR, REVERSE CURRENT ( A) 100 50 TJ = 150C 30 100C 25C 10 100C 2 1 0.5 25C 0.2 0.1 0.05 0.02 150 5 3 1 0.5 0.3 0.2 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV), AVERAGE FORWARD CURRENT (AMPS) dc 8 RqJA = 16C/W AS OBTAINED FROM A SMALL TO-220 HEAT SINK. SQUARE WAVE 6 5 4 350 400 450 500 550 600 650 14 dc 12 SQUARE WAVE 10 8 6 4 RATED VOLTAGE APPLIED 2 0 140 dc 3 SQUARE WAVE RqJA = 60C/W 1 AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 20 40 60 80 100 120 140 0 TA, AMBIENT TEMPERATURE (5C) 2 160 180 150 160 170 TC, CASE TEMPERATURE (5C) 180 Figure 13. Current Derating, Case (Per Leg) 10 7 300 16 Figure 11. Typical Forward Voltage (Per Leg) 9 250 Figure 12. Typical Reverse Current (Per Leg)* 2 0.1 200 VR, REVERSE VOLTAGE (VOLTS) *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. I F(AV), AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 150C 20 10 5 200 16 (CAPACITIVE LOAD) 14 IPK =5 IAV dc 10 12 10 20 SQUARE WAVE 8 (RESISTIVE-INDUCTIVE LOAD) IPK = I AV TJ = 125C 6 4 2 0 0 Figure 14. Current Derating, Ambient (Per Leg) 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 15. Power Dissipation (Per Leg) http://onsemi.com 5 16 1 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 0.05 t1 t2 SINGLE PULSE DUTY CYCLE, D = t1/t2 0.02 0.01 0.01 0.02 0.05 ZqJC(t) = r(t) RqJC RqJC = 1.5C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 P(pk) 0.1 0.2 0.5 1 2 5 t, TIME (ms) 10 TJ(pk) - TC = P(pk) ZqJC(t) 20 50 Figure 16. Thermal Response 1K 500 C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR3020WT, MUR3040WTG, MUR3060WT TJ = 25C 200 100 50 20 10 1 2 5 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 Figure 17. Typical Capacitance (Per Leg) http://onsemi.com 6 100 100 200 500 1K MUR3020WT, MUR3040WTG, MUR3060WT PACKAGE DIMENSIONS TO-247 CASE 340L-02 ISSUE E -T- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. C -B- E U N L 4 A -Q- 1 2 0.63 (0.025) 3 M T B M P -Y- K F 2 PL W J DIM A B C D E F G H J K L N P Q U W MILLIMETERS MIN MAX 20.32 21.08 15.75 16.26 4.70 5.30 1.00 1.40 1.90 2.60 1.65 2.13 5.45 BSC 1.50 2.49 0.40 0.80 19.81 20.83 5.40 6.20 4.32 5.49 --4.50 3.55 3.65 6.15 BSC 2.87 3.12 INCHES MIN MAX 0.800 8.30 0.620 0.640 0.185 0.209 0.040 0.055 0.075 0.102 0.065 0.084 0.215 BSC 0.059 0.098 0.016 0.031 0.780 0.820 0.212 0.244 0.170 0.216 --0.177 0.140 0.144 0.242 BSC 0.113 0.123 H G D 3 PL 0.25 (0.010) M Y Q S SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR3020WT/D