PLA134 Single-Pole, Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 100 350 3 Units VP mA Features * 3750Vrms Input/Output Isolation * Small 6-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available * Flammability Classification Rating of V-0 Description The PLA134 is a single-pole, normally open (1-Form-A) Solid State Relay that uses optically coupled MOSFET technology to provide 3750Vrms of input-to-output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The PLA134's combination of low on-resistance and high load current handling makes it suitable for a variety of industrial applications. Because Solid State Relays have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or though hole package than traditional electromechanical relays. Approvals Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part Number PLA134 PLA134S PLA134STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Control N/C 1 6 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control N/C 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% Pb RoHS 2002/95/EC DS-PLA134-R04 10% ILOAD e3 ton www.clare.com toff 1 PLA134 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 100 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 2 Conditions Symbol - IL t=10ms ILPK IF=350mA IF=750mA VL=100VP RON ILEAK Min Typ Max Units - - 350 750 1 - - 3 0.8 1 A mA A IF=5mA, IL=10mA ton toff - - 5 ms IL=350mA IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF www.clare.com R04 PLA134 PERFORMANCE DATA* 25 15 10 5 0.9 0.15 0.21 0.27 Turn-On (ms) .33 0.065 0.075 0.085 0.095 10 5 0 0.105 2.20 Device Count (N) 15 10 5 2.45 15 10 5 0 0 35 2.40 Typical Blocking Voltage Distribution (N=50, TA=25C) 20 5 2.35 Typical IF for Switch Dropout (N=50, IL=350mADC, TA=25C) 20 10 2.30 On-Resistance () 20 15 2.25 Turn-Off (ms) 25 Device Count (N) LED Current (mA) LED Current (mA) 110 120 130 140 Blocking Voltage (VP) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=200mADC) Typical Turn-Off vs. LED Forward Current (IL=200mADC) 1.05 1.35 1.65 1.95 0.75 2.25 0.3 30 1.05 1.35 1.65 1.95 100 2.25 Turn-On (ms) 20 15 10 Turn-Off (ms) 0.25 25 0.2 0.15 0.1 0.05 5 0 0 1.17 1.19 1.21 1.23 0 1.25 5 10 15 20 25 30 35 40 45 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 50 0 5 10 15 20 25 30 35 40 150 45 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On vs. Temperature (IF=5mA, IL=200mADC) Typical Turn-Off vs. Temperature (IF=5mA, IL=200mADC) 1.8 0.7 1.6 50 0.11 0.10 0.6 IF=50mA 1.2 IF=10mA IF=5mA 1.0 Turn-On (ms) 0.09 1.4 0.5 Turn-Off (ms) Device Count (N) 5 15 25 0.75 Device Count (N) 10 20 25 0 LED Forward Voltage Drop (V) 15 .39 Typical IF for Switch Operation (N=50, IL=350mADC, TA=25C) 25 20 0 0 Typical On-Resistance Distribution (N=50, IF=5mA, IL=350mADC, TA=25C) Typical Turn-Off Time (N=50, IF=5mA, IL=350mADC, TA=25C) Device Count (N) 20 Device Count (N) Device Count (N) 25 Typical Turn-On Time (N=50, IF=5mA, IL=350mADC, TA=25C) 0.4 0.3 0.2 -20 0 20 40 60 Temperature (C) 80 100 120 0.06 0.05 0.03 0 -40 0.07 0.04 0.1 0.8 0.08 -40 -20 0 20 40 60 Temperature (C) 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.clare.com 3 PLA134 PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=200mADC) 3.0 3.0 1.0 2.0 1.5 1.0 0.5 0.5 0 0 100 0 -100 -200 -300 -400 -1.5 Temperature (C) -0.5 0 0.5 Load Voltage (V) Typical On-Resistance vs. Temperature AC/DC Configuration (IL=350mADC) Typical On-Resistance vs. Temperature DC-Only Configuration (IL=350mADC) Typical Blocking Voltage vs. Temperature 0 20 40 60 80 -40 100 3.0 IF=5mA 0 20 40 60 80 100 2.5 IF=10mA 4 3 IF=5mA Instantaneous 2 -20 1 IF=5mA 2.0 1.5 IF=10mA 1.0 0.5 0 0 -20 0 20 40 60 Temperature (C) 80 400 300 IF=10mA 200 IF=5mA Load Current (mA) 500 100 -20 0 20 40 60 Temperature (C) 80 -40 -20 0 20 40 60 80 100 125 100 75 50 25 -40 100 0.018 800 0.016 700 0.014 600 500 IF=10mA 400 IF=5mA 300 Temperature (C) 20 40 60 80 Temperature (C) 100 120 100 0.006 0.002 0 80 0.008 0.004 -20 20 40 60 Temperature (C) 0.010 100 -40 0 0.012 200 120 -20 Typical Leakage vs. Temperature Measured Across Pins 4&6 900 0 0 1.5 150 Typical Load Current vs. Temperature DC Configuration Typical Load Current vs. Temperature AC/DC Configuration 600 1.0 0 -40 100 Leakage (A) -40 -1.0 175 Blocking Voltage (VP) -20 5 Load Current (mA) 200 Temperature (C) -40 On-Resistance () 300 Load Current (mA) LED Current (mA) 1.5 On-Resistance () LED Current (mA) 2.0 Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) 400 2.5 2.5 6 Typical IF for Switch Dropout vs. Temperature (IL=200mADC) 0 -40 -20 0 20 40 60 80 100 Temperature (C) Energy Rating Curve 2.4 Load Current (A) 2.0 1.6 1.2 0.8 0.4 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R04 PLA134 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PLA134 / PLA134S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PLA134 / PLA134S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R04 RoHS 2002/95/EC e3 www.clare.com 5 PLA134 MECHANICAL DIMENSIONS PLA134 8.382 0.381 (0.330 0.015) 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) PCB Hole Pattern 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) PLA134S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R04 PLA134 PLA134S 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PLA134-R04 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/13/2010