PAA190 Dual Single-Pole, Normally Open OptoMOS(R) Relays Parameter Load Voltage Load Current Max RON Rating 400 150 22 Description Units VP mA PAA190 is a dual 400V, 150mA, 22 normally open (1-Form-A) solid state relay that uses Clare's patented OptoMOS architecture to provide 5000Vrms of input to output isolation. This performance leader provides high blocking voltage handling capability and improved peak load current handling, as well as an enhanced 5000Vrms isolation barrier between the input and output circuits of the relay. Features * 5000Vrms Input/Output Isolation * Small 8-Pin Packages * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications Ordering Information Approvals * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # PAA190 PAA190S PAA190STR Description 8-Lead DIP (50/tube) 8-Lead Surface Mount (50/tube) 8-Lead Surface Mount (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 AC/DC Configuration 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-PAA190-R03 toff e3 www.clare.com 1 PAA190 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 400 5 50 1 150 800 5000 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current * Continuous, AC/DC Configuration Peak On-Resistance, AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output Conditions Symbol Min Typ Max t=10ms IL=150mA VL=400VP IL ILPK RON ILEAK - - 150 400 22 1 VL=50V, f=1MHz ton toff COUT - 25 1 0.5 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.2 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V Units mA A ms pF *NOTE: If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R03 PAA190 PERFORMANCE DATA* 15 10 5 0.21 0.27 0.33 0.39 5 25 20 15 10 5 0 0.07 0.09 0.11 0.13 0.15 13.1 13.7 14.3 14.9 15.5 16.1 Turn-On (ms) Turn-Off (ms) On-Resistance () Typical IF for Switch Operation (N=50, IL=150mADC, TA=25C) Typical IF for Switch Dropout (N=50, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 25 20 20 15 10 5 35 30 Device Count (N) 25 15 10 5 1.05 1.35 1.65 1.95 0.75 1.05 1.35 1.65 1.95 LED Current (mA) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=150mADC) 0.40 441.5 450.5 10 459.5 468.5 477.5 486.5 Typical Turn-Off vs. LED Forward Current (IF=150mADC) 0.12 0.10 0.30 Turn-Off (ms) Turn-On (ms) 15 10 2.25 0.35 20 15 Blocking Voltage (VP) LED Current (mA) 25 20 0 2.25 30 25 5 0 0.75 0.25 0.20 0.15 0.08 0.06 0.04 0.10 5 0.05 0 0 1.17 1.19 1.21 1.23 0.02 0 0 1.25 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On vs. Temperature (IL=150mADC) Typical Turn-Off vs. Temperature (IL=150mADC) 1.50 1.8 0.14 IF=50mA 1.2 IF=10mA IF=5mA 1.0 Turn-Off (ms) 1.4 1.00 IF=5mA 0.75 IF=10mA 0.50 0.25 -40 -20 0 20 40 60 Temperature (C) 80 100 120 0.10 0.08 0.06 0.04 0.02 0 0 0.8 50 0.12 1.25 1.6 Turn-On (ms) Device Count (N) 10 0.05 0 LED Forward Voltage Drop(V) 15 0.45 Device Count (N) Device Count (N) 0.15 Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mADC, TA=25C) 30 20 0 0 35 35 Device Count (N) 20 25 Device Count (N) Device Count (N) 25 Typical Turn-Off Time (N=50, IF=5mA, IL=150mADC, TA=25C) Typical Turn-On Time (N=50, IF=5mA, IL=150mADC, TA=25C) -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 PAA190 PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=150mADC) 3.0 3.0 1.5 1.0 0.5 2.0 1.5 1.0 20 15 10 5 0.5 0 0 0 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 -40 100 -20 0 20 40 60 Temperature (C) Temperature (C) Temperature (C) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Typical Load Current vs. Temperature Typical Blocking Voltage vs. Temperature Load Current (mA) 100 50 0 -50 -100 300 480 250 475 200 150 100 IF=10mA IF=5mA 50 0 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 -20 0 20 40 60 100 80 100 470 465 460 455 80 100 120 -40 -20 0 Temperature (C) Typical Leakage vs. Temperature Measured across Pins 5&6 or 7&8 1.2 0.030 1.0 0.025 0.020 0.015 0.010 20 40 60 Temperature (C) Energy Rating Curve 0.035 Load Current (A) Leakage (A) 80 450 -40 Load Voltage (V) 0.8 0.6 0.4 0.2 0.005 0 -40 Blocking Voltage (VP) -40 Load Current (mA) On-Resistance () 2.0 Typical On-Resistance vs. Temperature (IF=5mA, IL=150mADC) 25 2.5 LED Current (mA) LED Current (mA) 2.5 150 Typical IF for Switch Dropout vs. Temperature (IL=150mADC) -20 0 20 40 60 80 100 0 10s 100s 1ms 10ms 100ms Temperature (C) 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 PAA190 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PAA190 / PAA190S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PAA190 / PAA190S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 RoHS 2002/95/EC e3 www.clare.com 5 PAA190 MECHANICAL DIMENSIONS PAA190 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) PCB Hole Pattern 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 3.302 0.051 (0.130 0.002) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 TYP (0.01) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) PAA190S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.120 (0.032 0.004) 6 www.clare.com R03 PAA190 PAA190S Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PAA190-R03 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/30/2010