www.clare.com
DS-PAA190-R03 1
PAA190
Dual Single-Pole, Normally Open
OptoMOS® Relays
RoHS
2002/95/EC e3
Pb
Part # Description
PAA190 8-Lead DIP (50/tube)
PAA190S 8-Lead Surface Mount (50/tube)
PAA190STR 8-Lead Surface Mount (1000/Reel)
Parameter Rating Units
Load Voltage 400 VP
Load Current 150 mA
Max RON 22 Ω
Applications
Features
Description
Ordering Information
Pin Configuration
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• 5000Vrms Input/Output Isolation
• Small 8-Pin Packages
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
PAA190 is a dual 400V, 150mA, 22Ω normally open
(1-Form-A) solid state relay that uses Clare's patented
OptoMOS architecture to provide 5000Vrms of input to
output isolation.
This performance leader provides high blocking
voltage handling capability and improved peak load
current handling, as well as an enhanced 5000Vrms
isolation barrier between the input and output circuits
of the relay.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Switching Characteristics
of Normally Open Devices
Form-A
IF
ILOAD
10%
90%
ton toff
1
2
3
4
8
7
6
5
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
AC/DC Configuration
www.clare.com
2R03
PAA190
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 400 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 5000 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Electrical Characteristics @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current *
Continuous, AC/DC Configuration - IL- - 150 mA
Peak t=10ms ILPK - - 400
On-Resistance, AC/DC Configuration IL=150mA RON --22Ω
Off-State Leakage Current VL=400VPILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton --1
ms
Turn-Off toff - - 0.5
Output Capacitance VL=50V, f=1MHz COUT -25-pF
Input Characteristics
Input Control Current IL=150mA IF--5mA
Input Dropout Current - IF0.2 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance, Input to Output - CI/O -3-pF
*NOTE: If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value.
PAA190
www.clare.com 3
R03
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Typical Turn-On Time
(N=50, IF=5mA, IL=150mADC, TA=25ºC)
0.21 0.33 0.450.15 0.27 0.39
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=150mADC, TA=25ºC)
0.07 0.11 0.150.130.090.05
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=150mADC, TA=25ºC)
35
30
25
20
15
10
5
0
13.7 14.9 16.113.1 14.3 15.5
On-Resistance (Ω)
Device Count (N)
Typical IF for Switch Operation
(N=50, IL=150mADC, TA=25ºC)
0.75 1.35 1.951.05 1.65 2.25
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Dropout
(N=50, TA=25ºC)
25
20
15
10
5
0
0.75 1.35 1.951.05 1.65 2.25
LED Current (mA)
Device Count (N)
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
35
30
25
20
15
10
5
0
450.5 468.5 486.5441.5 459.5 477.5
Blocking Voltage (VP)
Device Count (N)
Typical Turn-On
vs. LED Forward Current
(IL=150mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
50
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical Turn-Off
vs. LED Forward Current
(IF=150mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.12
0.10
0.08
0.06
0.04
0.02
0
50
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
LED Forward Voltage Drop(V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=10mA
I
F
=5mA
Typical Turn-On vs. Temperature
(IL=150mADC)
Temperature (ºC)
Turn-On (ms)
-40
1.50
1.25
1.00
0.75
0.50
0.25
0
-20 0 20 40 60 80 100
I
F
=5mA
I
F
=10mA
Typical Turn-Off vs. Temperature
(IL=150mADC)
Temperature (ºC)
Turn-Off (ms)
-40
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
-20 0 20 40 60 80 100
www.clare.com
4R03
PAA190
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Typical IF for Switch Operation
vs. Temperature
(IL=150mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical IF for Switch Dropout
vs. Temperature
(IL=150mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=150mADC)
Temperature (ºC)
On-Resistance (Ω)
-40
25
20
15
10
5
0
-20 0 20 40 60 80 100
Typical Load Current
vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150
-2.5 -2.0 -1.5 -1.0 -0.5 0 1.51.00.5 2.0 2.5
Typical Load Current
vs. Temperature
Temperature (ºC)
Load Current (mA)
300
250
200
150
100
50
0
-40 -20 0 20 40 60 80 120100
I
F
=10mA
I
F
=5mA
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
480
475
470
465
460
455
450
-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured across Pins 5&6 or 7&8
Temperature (ºC)
Leakage (μA)
-40
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
-20 0 20 40 60 80 100
Energy Rating Curve
Time
Load Current (A)
10μs
1.2
1.0
0.8
0.6
0.4
0.2
0
1ms100μs 100ms 1s
10ms 10s 100s
PAA190
www.clare.com 5
R03
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
PAA190 / PAA190S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
PAA190 / PAA190S 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
6R03
PAA190
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.889 ± 0.102
(0.035 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 TYP
(0.01)
Dimensions
mm
(inches)
PCB Land Pattern
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
6.350 ± 0.127
(0.250 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
0.813 ± 0.120
(0.032 ± 0.004)
4.445 ± 0.127
(0.175 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.254 ± 0.127
(0.010 ± 0.0005)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
PAA190
PAA190S
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-PAA190-R03
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
7/30/2010
For additional information please visit our website at: www.clare.com
7
PAA190
Dimensions
mm
(inches)
User Direction of Feed
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K1=4.20
(0.165)
0
K =4.90
(0.193)
P=12.00
(0.472)
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
PAA190S Tape & Reel
