0.81 Base 1.13 Emboss Tape AYU1 CONNECTOR Co-axial connector Harness assembly Frequency from DC to 12GHz Specifications ------------------- * Impedance: 50 * Frequency range: DC to 12 GHz * Voltage standing wave ratio (V.S.W.R.) Cable type Harness DC to 3 GHz 3 to 6 GHz 6 to 12 GHz 0.81 (Single shield SA) 1.3 max. 1.3 max. 1.4 max. 1.13 (Single & Double shields TA) 1.3 max. 1.4 max. 1.4 max. 1.3 max. 1.4 max. 1.5 max. Base * Insertion loss (dB/m) 3 GHz 6 GHz 12 GHz 0.81 (Single shield SA) 5.8 9.4 14.9 1.13 (Single shields TA) 3.4 6.4 7.7 1.13 (Double shields TA) 2.9 4.1 6.1 - - - Cable type Harness Base Note: The specified values in above tables were measured by network analyzer as shown in the figure below. [Harness] Harness: Both end harness assembly with harness of 5,000 mm SMA conversion adapter: AYU1-AP-PP Conversion adapter Termination to network analyzer This is SMT type, space saving and co-axial connector, corresponding to notebook PC, thinner and lighter telecommunications apparatus, etc. [Base] Base: AYU1-1P-02676-120 SMA conversion adapter: AYU1-AP-JJ Termination [Application] UWB, WiMAX, Wireless LAN, Bluetooth, DSRC, Mobile phones, PDA, GPS, Express, etc. to network analyzer * Temperature range: - 25C to + 85C (including temperature rise in applying electrical current) * Withstanding voltage: 200 VAC/minute * This connector can also be applicable the frequency of 12 GHz or more. * Space saving and low profile design * Easy mating and unmating connector * Adopting extra fine diameter high frequency cable * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. PC board layout 1.050.05 10.05 2.20.05 PC board should remain unprocessed inside of the patterns. 10.05 1.90.05 40.05 Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. The dimensions above are our recommendation value. 2. The above figure is the figure viewed from the connector mounting side. 1 Conversion adapter AYU1 CONNECTOR Socket (Harness assembly) 2.8 2.8 2.23 AYU1 (1.13) Harness 1.86 AYU1 (0.81Harness 5.18 4.76 4.03 1.13 2.3 2.06 0.81 1.56 3.61 2.3 Material and Finish Contact: Copper alloy, nickel-undercoated, gold-plated Housing: Thermoplastic resin, UL94V-0 Shell: Copper alloy, copper-undercoated, silver-plated Harness specifications Overall length L Overall length L Cable type (Specifications for outer diameter and outer conductor) Harness model No. (Single end harness) Harness model No. (Both end harness) 0.81 (Single shielded, SA) AYU1-1S21-SYYYY-ZZZV (LF) AYU1-1S21-XYYYY-000V (LF) 1.13 (Single shielded, TA) AYU1-1S1C-SYYYY-ZZZV (LF) AYU1-1S1C-XYYYY-000V (LF) 1.13 (Double shielded, TA) AYU1-1S13-SYYYY-ZZZV (LF) AYU1-1S13-XYYYY-000V (LF) Note 1) Type of outer conductor SA: Silver-plated annealed copper wire, TA: Tin-plated annealed copper wire Note 2) The following alphabet and number shall be put in the model No. X...alphabet denotes cable end treatment (D: Both end harness/same direction, R: Both end harness/reverse direction) Y...number denotes harness length Z...number denotes strip length V...alphabet denotes color identification (Blank: Black, G: Gray, W: White, B: Blue) Example 1... 1.13 mm (double shielded, TA) cable, connector end processing: both end harness (same direction), harness length: 251 mm, wire color: black Model No.: AYU1-1S13-D0251-000(LF) Example 2... 0.81 mm (single shielded, SA) cable, connector end processing: single end harness, harness length: 800 mm, strip length: [inner conductor 2.0 mm, insulator 1.0 mm, outer conductor 3.0 mm], cable color: white Model No.: AYU1-1S21-S0800-213W(LF) Note 3) Contact JST for details about overall length and connector end processing. Harness overall length standard tolerance Overall length L (mm) Standard tolerance (mm) 35L200 4 200L500 8 500L1000 12 1000 1.5 Note: The shortest length L=35 mm 2 AYU1 CONNECTOR Base 2.6 Model No. Material and Finish Q'ty/reel AYU1-1P-02676-120 Contact: Copper alloy, nickel-undercoated, selective gold-plated Housing: Heat resisting resin, UL94V-0 Shell: Copper alloy, copper-undercoated, silver-plated 5,000 3 RoHS compliance 1.8 1.28 2 Assembly layout AYU1 (1.13) Harness Insertion and extraction jig Model No.: EJ-AYU1 3 1.13 2.5 2 0.81 AYU1 (0.81) Harness