AYU1-1P-02676-120-TF - JST Germany

Specifications –––––––––––––––––––

• Impedance: 50 Ω

• Frequency range: DC to 12 GHz

• Voltage standing wave ratio (V.S.W.R.)

AYU1 CONNECTOR

Co-axial connector

Emboss Tape

同軸

φ0.81

φ1.13

Harness: Both end harness assembly with harness of 5,000 mm

SMA conversion adapter: AYU1-AP-PP

tonetworkanalyzer Termination

Conversionadapter

Base:AYU1-1P-02676-120

SMAconversionadapter:AYU1-AP-JJ

tonetwork

analyzer

Termination

Conversion

adapter

±0.05

1.05 ±0.05

±0.05

2.2

±0.05

1.9

±0.05

PCboardshouldremain

unprocessedinsideofthepatterns.

1.4max.

1.5max.

1.3max.

1.4max.

1.4max.

1.3max.

1.3max.

φ0.81 (Single shield SA)

φ1.13

(Single & Double shields TA)

Cable type DC to 3 GHz 3 to 6 GHz 6 to 12 GHz

Harness

Base

14.9

7.7

6.1

−

9.4

6.4

4.1

−

5.8

3.4

2.9

−

φ0.81 (Single shield SA)

φ1.13 (Single shields TA)

φ1.13 (Double shields TA)

Cable type 3GHz 6GHz 12GHz

Harness

Base

Note: The specified values in above tables were measured by network

analyzer as shown in the figure below.

Base

Harness assembly

This is SMT type, space saving and co-axial

connector, corresponding to notebook PC,

thinner and lighter telecommunications

apparatus, etc.

[Application]

UWB, WiMAX, Wireless LAN, Bluetooth,

DSRC, Mobile phones, PDA, GPS, Express,

etc. • Temperature range: - 25˚C to + 85˚C

(including temperature rise in

applying electrical current)

• Withstanding voltage: 200 VAC/minute

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

* Compliant with RoHS.

[Harness]

• This connector can also be applicable the

frequency of 12 GHz or more.

• Space saving and low profile design

• Easy mating and unmating connector

• Adopting extra fine diameter high frequency

cable

• Insertion loss (dB/m)

[Base]

Frequency from DC to 12GHz

Note: 1. Tolerances are non-cumulative:

0.05 mm for all centers. The dimensions above are our recommendation value.

2. The above figure is the figure viewed from the connector mounting side.

PC board layout

AYU1 CONNECTOR

同軸

AYU1 (φ0.81）Harness AYU1 (φ1.13)Harness

Material and Finish

Contact: Copper alloy, nickel-undercoated, gold-plated

Housing: Thermoplastic resin, UL94V-0

Shell: Copper alloy, copper-undercoated, silver-plated

2.8

（3.61）

（4.76）

1.56

1.86

φ0.81

φ1.13

2.3

2.8

（4.03）

（5.18）

2.06

2.23

φ2.3

HarnessmodelNo.(Singleendharness) HarnessmodelNo.(Bothendharness)

Cabletype

(Specificationsforouter

diameterandouterconductor)

 φ0.81(Singleshielded,SA) AYU1-1S21-SYYYY-ZZZV (LF) AYU1-1S21-XYYYY-000V (LF)

 φ1.13(Singleshielded,TA) AYU1-1S1C-SYYYY-ZZZV (LF) AYU1-1S1C-XYYYY-000V (LF)

 φ1.13(Doubleshielded,TA) AYU1-1S13-SYYYY-ZZZV (LF) AYU1-1S13-XYYYY-000V (LF)

OveralllengthL

Standard tolerance (mm)

Overall length L (mm)

 35≦L≦200 ±4

 200＜L≦500 ±8

 500＜L≦1000 ±12

 1000＜ ±1.5％

Note: The shortest length L=35 mm

同軸

Harness specifications

Harness overall length standard tolerance

Socket (Harness assembly)

Note 1) Type of outer conductor SA: Silver-plated annealed copper wire, TA: Tin-plated annealed copper wire

Note 2) The following alphabet and number shall be put in the model No.

X...alphabet denotes cable end treatment (D: Both end harness/same direction, R: Both end harness/reverse direction)

Y...number denotes harness length

Z...number denotes strip length

V...alphabet denotes color identification (Blank: Black, G: Gray, W: White, B: Blue)

Example 1...

1.13 mm (double shielded, TA) cable, connector end processing: both end harness (same direction), harness length: 251 mm, wire color: black

Model No.: AYU1-1S13-D0251-000(LF)

Example 2...

0.81 mm (single shielded, SA) cable, connector end processing: single end harness, harness length: 800 mm,

strip length: [inner conductor 2.0 mm, insulator 1.0 mm, outer conductor 3.0 mm], cable color: white

Model No.: AYU1-1S21-S0800-213W(LF)

Note 3) Contact JST for details about overall length and connector end processing.

2.6

1.8

1.28

Material and Finish

Contact: Copper alloy, nickel-undercoated,

selective gold-plated

Housing: Heat resisting resin, UL94V-0

Shell: Copper alloy, copper-undercoated, silver-plated

Q'ty/reel

Model No.

AYU1-1P-02676-120

5,000

AYU1 CONNECTOR

同軸

AYU1 (φ0.81)Harness AYU1 (φ1.13)Harness

φ1.13

2.5

φ0.81

RoHS compliance

Base

Insertion and extraction jig

Model No.: EJ-AYU1

Assembly layout