TAZ Series Including CWR09 and COTS-Plus The TAZ part has fully molded, compliant leadframe construction designed for use in applications utilizing solder (Reflow, Wave or Vapor Phase), conductive adhesive or thermal compression bonding techniques. Each chip is marked with polarity, capacitance code and rated voltage. The series comprises eight case sizes (see dimensional chart below) with the new V case enabling capacitance values to 470 F. The C case, with its non-standard aspect ratio, is retained as a QPL (Qualified Product List) only special. CASE DIMENSIONS: millimeters (inches) Case Code Length L Width W 0.38 (0.015) 0.38 (0.015) Height H 0.38 (0.015) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.050) D 3.81 (0.150) 2.54 (0.100) 1.27 (0.050) E 5.08 (0.200) 2.54 (0.100) 1.27 (0.050) H S L A W1 W Term. Width W1 1.270.13 (0.050.005) 1.270.13 (0.050.005) 2.41+0.13/-0.25 (0.095+0.005/-0.01) 2.41+0.13/-0.25 (0.095+0.005/-0.01) F 5.59 (0.220) 2.54 (0.100) 1.78 (0.070) G 6.73 (0.265) 2.79 (0.110) 2.79 (0.110) H 7.24 (0.285) 3.81 (0.150) 2.79 (0.110) 3.300.13 (0.130.005) 2.670.13 (0.1050.005) 3.68+0.13/-0.51 (0.145+0.005/-0.02) V 6.93 (0.273) 5.97 (0.235) 3.45 (0.136) 3.050.13 (0.1200.005) Term. Length A .13 (.005) S min 0.76 (0.030) 0.38 (0.015) 0.76 (0.030) 1.65 (0.065) 0.76 (0.030) 1.65 (0.065) 0.76 (0.030) 2.92 (0.115) 0.76 (0.030) 3.43 (0.135) 1.27 (0.050) 3.56 (0.140) 1.27 (0.050) 4.06 (0.160) 1.4 (0.055) 3.38 (0.133) MARKING (White marking on black body) Polarity Stripe (+) Capacitance Code Rated Voltage Case sizes A through E share a common (0.050" nom) height profile, compatible with PCMCIA type II applications. These allow downsizing in all portable applications, ranging from sub-miniature hard-disc drive (HDD)/computer to portable communications/GPS systems. The F case at 0.070" nom offers the versatility of a low profile design, while allowing capacitance ratings to 100 F for low voltage filtering applications. Cases G, H and V also offer lower profile and greater volumetric efficiency than their nearest EIA sized counterparts (ref. CWR11). These are especially suited to power supply applications. The V case is a new addition to the series designed to maximize capacitance/voltage ratings while achieving minimum ESR levels and maximum power dissipation. The regular configuration allows for banking (brickwalling) applications where maximum capacitance with minimal ESR and inductance are required in a limited board space. 20 TAZ Series Including CWR09 and COTS-Plus Technical Data: Capacitance Range: Capacitance Tolerance: Rated DC Voltage: (VR) Category Voltage: (VC) Surge Voltage: (VC) Unless otherwise specified, all technical 0.1 to 470 F 20%, 10%, 5% 4 6 10 15 2.7 4 7 10 5.2 8 13 20 3.5 5 9 12 -55C to +125C 85C: 125C: 85C: 125C: Operating Temperature Range: data relate to an ambient temperature of 25C 20 13 26 16 25 17 33 21 35 23 46 28 50 33 65 40 CWR09 - MIL-PRF-55365/4 Fully qualified to MIL-PRF-55365/4, this series represents the most flexible of surface mount form factors, offering eight case sizes (A through H). This series is fully interchangeable with CWR06 conformal types, while offering the advantages of molded body/compliant termination construction, polarity, capacitance and JAN brand packaging. The molded construction is compatible with a wide range of SMT board assembly processes including wave or reflow solder, conductive epoxy or compression bonding techniques. The five smaller cases are characterized by their low profile construction, with the A case being the world's smallest molded military tantalum. There are three termination finishes available: fused solder plated ("K" per MIL-PRF-55365), hot solder dipped ("C") and gold plated ("B"). In addition, the molding compound has been selected to meet the requirements of UL94V-0 and outgassing requirements of NASA SP-R0022A. PART NUMBERING SYSTEM CWR09 J Style Voltage Code B Termination Finish 225 K B A \TR Capacitance Code Capacitance Tolerance Reliability Grade Surge Test Option Packaging TAZ COTS-PLUS SERIES This series features: * CWR09 form factor in Standard and Extended ratings. * Low Profile molded design (Cases A through E). * Low ESR Ratings (Cases G through V). * Extended Case size (V) for ratings to 470 F. * Weibull Reliability Grading and Surge Test options. All ratings in this series offer the advantages of molded body/compliant termination construction, polarity, capacitance and voltage marking. The molded construction is compatible with a wide range of SMT board assembly processes including wave or reflow solder, conductive epoxy or compression bonding techniques. PART NUMBERING SYSTEM TAZ H 227 M 006 C R Style Case Size Capacitance Code Capacitance Tolerance Voltage Code Standard or Low ESR Range Packaging SB 08 00 Qualification/ Termination Surge Test Reliability Finish Option 21 Surface Mount Military CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus DC Leakage (max) Dissipation Factor (max) QPL Part Number (for reference only) DC rated voltage (85C) (volts) Cap (nom) F +25C (A) +85C (A) +125C (A) +25C (%) +85/125C (%) -55C (%) ESR (max) 100 kHz +25C (Ohms) Case Size TAZA225*004C#@0^++ TAZA475*004C#@0^++ TAZB475*004C#@0^++ TAZB106*004C#@0^++ TAZD106*004C#@0^++ TAZE156*004C#@0^++ TAZD226*004C#@0^++ TAZE336*004C#@0^++ TAZF336*004C#@0^++ TAZG686*004C#@0^++ TAZF107*004C#@0^++ TAZH107*004C#@0^++ TAZG157*004C#@0^++ CWR09C^225*@+ 4 4 4 4 4 4 4 4 4 4 4 4 4 2.2 4.7 4.7 10.0 10.0 15.0 22.0 33.0 33.0 68.0 100.0 100.0 150.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 4.0 4.0 6.0 10 10 10 10 10 10 10 20 20 30 40 40 60 12 12 12 12 12 12 12 24 24 36 48 48 72 6 6 6 8 8 8 8 8 8 10 10 10 10 8 8 8 10 8 10 10 10 10 12 12 12 12 8 8 8 10 10 12 12 12 12 12 12 12 12 8.0 12.0 8.0 8.0 4.0 3.5 4.0 3.0 2.2 1.1 2.0 0.9 1.0 A A B B D E D E F G F H G TAZA155*006C#@0^++ TAZA335*006C#@0^++ TAZB335*006C#@0^++ TAZB685*006C#@0^++ TAZD685*006C#@0^++ TAZE106*006C#@0^++ TAZD156*006C#@0^++ TAZE226*006C#@0^++ TAZF226*006C#@0^++ TAZG476*006C#@0^++ TAZF686*006C#@0^++ TAZH686*006C#@0^++ TAZG107*006C#@0^++ TAZG107*006L#@0^++ TAZH227*006C#@0^++ TAZH227*006L#@0^++ TAZV477*006L#@0^++ CWR09D^155*@+ 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 1.5 3.3 3.3 6.8 6.8 10.0 15.0 22.0 22.0 47.0 68.0 68.0 100.0 100.0 220.0 220.0 470.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 4.0 4.0 6.0 6.0 10.0 10.0 28.0 10 10 10 10 10 10 10 20 20 30 40 40 60 60 100 100 280 12 12 12 12 12 12 12 24 24 36 48 48 72 72 120 120 336 6 6 6 6 6 8 8 8 8 10 10 10 10 10 10 10 12 8 8 8 8 8 10 10 10 10 12 12 12 12 12 12 12 14 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 14 8.0 12.0 8.0 8.0 4.5 3.5 5.0 3.5 2.2 1.1 1.5 0.9 1.1 0.150 0.9 0.100 0.055 A A B B D E D E F G F H G G H H V AVX Part Number CWR09C^475*@+ CWR09C^106*@+ CWR09C^156*@+ CWR09C^336*@+ CWR09C^686*@+ CWR09C^156*@+ CWR09D^335*@+ CWR09D^685*@+ CWR09D^106*@+ CWR09D^226*@+ CWR09D^476*@+ CWR09D^686*@+ Following the voltage code, C designates Standard, L designates Low ESR Ratings Part Number Designations ^ = Termination Finish:1 For TAZ p/n: 9 = Gold Plated 8 = Hot Solder Dipped 0 = Solder Fused For CWR p/n: B = Gold Plated C = Hot Solder Dipped K = Solder Fused # = Inspection Level: S = Std. Conformance L = Optional Group A For CWR p/n: M = Military Conformance per MIL-PRF-55365 (1) V case size is only available as solder fused 22 * = Tolerance: M = 20% K = 10% J = 5% (Special order only) @ = Failure Rate Level: Weibull: B = 0.1%/1000 Hrs. (90% C = 0.01%/1000 Hrs. conf.) Comm: Z = Non ER + = Surge Option: For TAZ p/n: 00 = None 23 = 10 cycles, +25C 24 = 10 cycles, -55C & +85C For CWR p/n: A = 10 cycles, +25C B = 10 cycles, -55C & +85C = Packaging: For TAZ p/n: B = Bulk R = 7" T&R S = 13" T&R For CWR p/n: Bulk = Standard \TR = 7" T&R \TR13 = 13" T&R \W = Waffle Surface Mount Military CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus AVX Part Number TAZA105*010C#@0^++ TAZA225*010C#@0^++ TAZB225*010C#@0^++ TAZB475*010C#@0^++ TAZD475*010C#@0^++ TAZD685*010C#@0^++ TAZE685*010C#@0^++ TAZD106*010C#@0^++ TAZE156*010C#@0^++ TAZF156*010C#@0^++ TAZE226*010C#@0^++ TAZG336*010C#@0^++ TAZF476*010C#@0^++ TAZH476*010C#@0^++ TAZG686*010C#@0^++ TAZG686*010L#@0^++ TAZH107*010C#@0^++ TAZH107*010L#@0^++ TAZH157*010C#@0^++ TAZH157*010L#@0^++ TAZV337*010L#@0^++ TAZA684*015C#@0^++ TAZA105*015C#@0^++ TAZB155*015C#@0^++ TAZB335*015C#@0^++ TAZD335*015C#@0^++ TAZD475*015C#@0^++ TAZE475*015C#@0^++ TAZE106*015C#@0^++ TAZF106*015C#@0^++ TAZF226*015C#@0^++ TAZG226*015C#@0^++ TAZH336*015C#@0^++ TAZH686*015C#@0^++ TAZH686*015L#@0^++ TAZH107*015C#@0^++ TAZH107*015L#@0^++ TAZV157*015L#@0^++ TAZV227*015L#@0^++ DC Leakage (max) Dissipation Factor (max) QPL Part Number (for reference only) DC rated voltage (85C) (volts) Cap (nom) F +25C (A) +85C (A) +125C (A) +25C (%) +85/125C (%) -55C (%) ESR (max) 100 kHz +25C (Ohms) Case Size CWR09F^105*@+ 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1.0 2.2 2.2 4.7 4.7 6.8 6.8 10.0 15.0 15.0 22.0 33.0 47.0 47.0 68.0 68.0 100.0 100.0 150.0 150.0 330.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.0 4.0 5.0 6.0 6.0 10.0 10.0 15.0 15.0 33.0 10 10 10 10 10 10 10 10 20 20 30 30 40 50 60 60 100 100 150 150 330 12 12 12 12 12 12 12 12 24 24 36 36 48 60 72 72 120 120 180 180 396 6 6 6 6 6 6 6 6 8 8 8 10 10 10 10 10 10 10 10 10 12 8 8 8 8 8 8 8 8 10 8 10 12 12 12 12 12 12 12 12 12 14 8 8 8 8 8 8 8 8 10 10 10 12 12 12 12 12 12 12 12 12 14 10.0 12.0 8.0 8.0 4.5 5.0 3.5 4.0 3.0 2.5 2.0 1.1 1.5 0.9 1.1 0.200 0.9 0.100 0.9 0.100 0.060 A A B B D D E D E F E G F H G G H H H H V 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.68 1.0 1.5 3.3 3.3 4.7 4.7 10.0 10.0 22.0 22.0 33.0 68.0 68.0 100.0 100.0 150.0 220.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 4.0 5.0 10.0 10.0 15.0 15.0 23.0 33.0 10 10 10 10 10 10 10 20 20 30 40 50 100 100 150 150 230 330 12 12 12 12 12 12 12 24 24 36 48 60 120 120 180 180 276 396 6 6 6 6 6 6 6 6 6 8 6 8 8 8 10 10 8 10 8 8 8 8 8 8 8 8 8 10 8 8 10 10 12 12 10 12 8 8 8 8 8 8 8 8 8 10 8 10 12 12 12 12 12 14 12.0 15.0 8.0 9.0 5.0 6.0 4.0 4.0 2.5 3.0 1.1 0.9 0.9 0.150 0.9 0.125 0.075 0.075 A A B B D D E E F F G H H H H H V V CWR09F^225*@+ CWR09F^475*@+ CWR09F^685*@+ CWR09F^156*@+ CWR09F^336*@+ CWR09F^476*@+ CWR09H^684*@+ CWR09H^155*@+ CWR09H^335*@+ CWR09H^475*@+ CWR09H^106*@+ CWR09H^226*@+ CWR09H^336*@+ Following the voltage code, C designates Standard, L designates Low ESR Ratings Part Number Designations ^ = Termination Finish:1 For TAZ p/n: 9 = Gold Plated 8 = Hot Solder Dipped 0 = Solder Fused For CWR p/n: B = Gold Plated C = Hot Solder Dipped K = Solder Fused # = Inspection Level: S = Std. Conformance L = Optional Group A For CWR p/n: M = Military Conformance per MIL-PRF-55365 * = Tolerance: M = 20% K = 10% J = 5% (Special order only) @ = Failure Rate Level: Weibull: B = 0.1%/1000 Hrs. (90% C = 0.01%/1000 Hrs. conf.) Comm: Z = Non ER + = Surge Option: For TAZ p/n: 00 = None 23 = 10 cycles, +25C 24 = 10 cycles, -55C & +85C For CWR p/n: A = 10 cycles, +25C B = 10 cycles, -55C & +85C = Packaging: For TAZ p/n: B = Bulk R = 7" T&R S = 13" T&R For CWR p/n: Bulk = Standard \TR = 7" T&R \TR13 = 13" T&R \W = Waffle (1) V case size is only available as solder fused 23 Surface Mount Military CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus DC Leakage (max) Dissipation Factor (max) QPL Part Number (for reference only) DC rated voltage (85C) (volts) Cap (nom) F +25C (A) +85C (A) +125C (A) +25C (%) +85/125C (%) -55C (%) ESR (max) 100 kHz +25C (Ohms) Case Size TAZA474*020C#@0^++ TAZA684*020C#@0^++ TAZB684*020C#@0^++ TAZB105*020C#@0^++ TAZB225*020C#@0^++ TAZD225*020C#@0^++ TAZD335*020C#@0^++ TAZE335*020C#@0^++ TAZE475*020C#@0^++ TAZE685*020C#@0^++ TAZF685*020C#@0^++ TAZF156*020C#@0^++ TAZG156*020C#@0^++ TAZG226*020C#@0^++ TAZG226*020L#@0^++ TAZH226*020C#@0^++ TAZH476*020C#@0^++ TAZH476*020L#@0^++ TAZV107*020L#@0^++ CWR09J^474*@+ 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0.47 0.68 0.68 1.0 2.2 2.2 3.3 3.3 4.7 6.8 6.8 15.0 15.0 22.0 22.0 22.0 47.0 47.0 100.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.0 4.0 4.0 4.0 10.0 10.0 20.0 10 10 10 10 10 10 10 10 10 20 20 30 30 40 40 40 100 100 200 12 12 12 12 12 12 12 12 12 24 24 36 36 48 48 48 120 120 240 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 12 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 14 14.0 15.0 10.0 12.0 9.0 5.0 6.0 4.0 6.0 5.0 2.4 3.0 1.1 2.5 0.500 0.9 0.9 0.250 0.095 A A B B B D D E E E F F G G G H H H V TAZA334*025C#@0^++ TAZB684*025C#@0^++ TAZB105*025C#@0^++ TAZD155*025C#@0^++ TAZD225*025C#@0^++ TAZE225*025C#@0^++ TAZE335*025C#@0^++ TAZF475*025C#@0^++ TAZF685*025C#@0^++ TAZG685*025C#@0^++ TAZG106*025C#@0^++ TAZH156*025C#@0^++ TAZH226*025C#@0^++ TAZH226*025L#@0^++ TAZV686*025L#@0^++ CWR09K^334*@+ CWR09K^684*@+ 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 0.33 0.68 1.0 1.5 2.2 2.2 3.3 4.7 6.8 6.8 10.0 15.0 22.0 22.0 68.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 3.0 4.0 6.0 6.0 17.0 10 10 10 10 10 10 10 20 20 20 30 40 60 60 170 12 12 12 12 12 12 12 24 24 24 36 48 72 72 204 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14 15.0 7.5 10.0 6.5 6.0 3.5 4.0 2.5 3.0 1.2 1.4 1.0 0.9 0.200 0.095 A B B D D E E F F G G H H H V AVX Part Number CWR09J^684*@+ CWR09J^105*@+ CWR09J^225*@+ CWR09J^335*@+ CWR09J^685*@+ CWR09J^156*@+ CWR09J^226*@+ CWR09K^155*@+ CWR09K^225*@+ CWR09K^475*@+ CWR09K^685*@+ CWR09K^106*@+ CWR09K^156*@+ Following the voltage code, C designates Standard, L designates Low ESR Ratings Part Number Designations ^ = Termination Finish:1 For TAZ p/n: 9 = Gold Plated 8 = Hot Solder Dipped 0 = Solder Fused For CWR p/n: B = Gold Plated C = Hot Solder Dipped K = Solder Fused # = Inspection Level: S = Std. Conformance L = Optional Group A For CWR p/n: M = Military Conformance per MIL-PRF-55365 (1) V case size is only available as solder fused. 24 * = Tolerance: M = 20% K = 10% J = 5% (Special order only) @ = Failure Rate Level: Weibull: B = 0.1%/1000 Hrs. (90% C = 0.01%/1000 Hrs. conf.) Comm: Z = Non ER + = Surge Option: For TAZ p/n: 00 = None 23 = 10 cycles, +25C 24 = 10 cycles, -55C & +85C For CWR p/n: A = 10 cycles, +25C B = 10 cycles, -55C & +85C = Packaging: For TAZ p/n: B = Bulk R = 7" T&R S = 13" T&R For CWR p/n: Bulk = Standard \TR = 7" T&R \TR13 = 13" T&R \W = Waffle Surface Mount Military CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus AVX Part Number QPL Part Number (for reference only) DC rated Cap voltage (nom) (85C) F (volts) DC Leakage (max) Dissipation Factor (max) +25C (A) +85C (A) +125C (A) +25C (%) +85/125C (%) -55C (%) ESR (max) 100 kHz +25C (Ohms) Case Size TAZA224*035C#@0^++ TAZB474*035C#@0^++ TAZD105*035C#@0^++ TAZE155*035C#@0^++ TAZF335*035C#@0^++ TAZG475*035C#@0^++ TAZH685*035C#@0^++ TAZH106*035C#@0^++ TAZH106*035L#@0^++ CWR09M^224*@+ CWR09M^474*@+ CWR09M^105*@+ CWR09M^155*@+ CWR09M^335*@+ CWR09M^475*@+ CWR09M^685*@+ 35 35 35 35 35 35 35 35 35 0.22 0.47 1.0 1.5 3.3 4.7 6.8 10.0 10.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 4.0 10 10 10 10 10 20 30 40 40 12 12 12 12 12 24 36 48 48 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 10 10 8 8 8 8 8 8 8 10 10 18.0 10.0 6.5 4.5 2.5 1.5 1.3 0.9 0.300 A B D E F G H H H TAZA104*050C#@0^++ TAZA154*050C#@0^++ TAZB224*050C#@0^++ TAZB334*050C#@0^++ TAZD684*050C#@0^++ TAZE105*050C#@0^++ TAZF155*050C#@0^++ TAZF225*050C#@0^++ TAZG335*050C#@0^++ TAZH475*050C#@0^++ CWR09N^104*@+ CWR09N^154*@+ CWR09N^224*@+ CWR09N^334*@+ CWR09N^684*@+ CWR09N^105*@+ CWR09N^155*@+ CWR09N^225*@+ CWR09N^335*@+ CWR09N^475*@+ 50 50 50 50 50 50 50 50 50 50 0.10 0.15 0.22 0.33 0.68 1.0 1.5 2.2 3.3 4.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 10 10 10 10 10 10 10 20 20 30 12 12 12 12 12 12 12 24 24 36 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 22.0 17.0 14.0 12.0 7.0 6.0 4.0 2.5 2.0 1.5 A A B B D E F F G H Following the voltage code, C designates Standard, L designates Low ESR Ratings Part Number Designations ^ = Termination Finish:1 For TAZ p/n: 9 = Gold Plated 8 = Hot Solder Dipped 0 = Solder Fused For CWR p/n: B = Gold Plated C = Hot Solder Dipped K = Solder Fused # = Inspection Level: S = Std. Conformance L = Optional Group A For CWR p/n: M = Military Conformance per MIL-PRF-55365 * = Tolerance: M = 20% K = 10% J = 5% (Special order only) @ = Failure Rate Level: Weibull: B = 0.1%/1000 Hrs. (90% C = 0.01%/1000 Hrs. conf.) Comm: Z = Non ER + = Surge Option: For TAZ p/n: 00 = None 23 = 10 cycles, +25C 24 = 10 cycles, -55C & +85C For CWR p/n: A = 10 cycles, +25C B = 10 cycles, -55C & +85C = Packaging: For TAZ p/n: B = Bulk R = 7" T&R S = 13" T&R For CWR p/n: Bulk = Standard \TR = 7" T&R \TR13 = 13" T&R \W = Waffle (1) V case size is only available as solder fused. 25 CWR09 Series MIL-C-55365/4 ELECTRICAL RATINGS FOR CWR09 CAPACITORS MIL-C-55365/4 Part Number (See Note) Case Size CWR09C*225@ CWR09C*475@ CWR09C*685@ CWR09C*106@ CWR09C*156@ CWR09C*336@ CWR09C*686@ CWR09C*107@ A B C D E F G H 4 4 4 4 4 4 4 4 CWR09D*155@ CWR09D*335@ CWR09D*475@ CWR09D*685@ CWR09D*106@ CWR09D*226@ CWR09D*476@ CWR09D*686@ CWR09F*105@ CWR09F*225@ CWR09F*335@ CWR09F*475@ CWR09F*685@ CWR09F*156@ CWR09F*336@ CWR09F*476@ A B C D E F G H A B C D E F G H CWR09H*684@ CWR09H*155@ CWR09H*225@ CWR09H*335@ CWR09H*475@ CWR09H*106@ CWR09H*226@ CWR09H*336@ CWR09J*474@ CWR09J*684@ CWR09J*105@ CWR09J*155@ CWR09J*225@ CWR09J*335@ CWR09J*685@ CWR09J*156@ CWR09J*226@ * = Termination Finish B = Gold Plated C = Hot Solder Dipped K = Solder Fused Rated Voltage (85C) (volts) DC Leakage (max.) Dissipation Factor (max.) -55C (%) Max. ESR 100 kHz +25C Style CWR09 (Ohms) 8 8 8 8 10 10 12 12 8 8 8 10 12 12 12 12 8.0 8.0 5.5 4.0 3.5 2.2 1.1 0.9 6 6 6 6 8 8 10 10 6 6 6 6 6 8 10 10 8 8 8 8 10 10 12 12 8 8 8 8 8 8 12 12 8 8 8 8 12 12 12 12 8 8 8 8 8 10 12 12 8.0 8.0 5.5 4.5 3.5 2.2 1.1 0.9 10.0 8.0 5.5 4.5 3.5 2.5 1.1 0.9 12 12 12 12 12 24 48 60 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 12.0 8.0 5.5 5.0 4.0 2.5 1.1 0.9 12 12 12 12 12 12 24 36 48 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14.0 10.0 12.0 6.0 5.0 4.0 2.4 1.1 0.9 +25C (A) +85C (A) +125C (A) 2.2 4.7 6.8 10.0 15.0 33.0 68.0 100.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 10 10 10 10 10 20 30 40 12 12 12 12 12 24 36 48 6 6 6 8 8 8 10 10 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 1.5 3.3 4.7 6.8 10.0 22.0 47.0 68.0 1.0 2.2 3.3 4.7 6.8 15.0 33.0 47.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 5.0 10 10 10 10 10 20 30 40 10 10 10 10 10 20 30 50 12 12 12 12 12 24 36 48 12 12 12 12 12 24 36 60 A B C D E F G H 15 15 15 15 15 15 15 15 0.68 1.5 2.2 3.3 4.7 10.0 22.0 33.0 1.0 1.0 1.0 1.0 1.0 2.0 4.0 5.0 10 10 10 10 10 20 40 50 A B B C D E F G H 20 20 20 20 20 20 20 20 20 0.47 0.68 1.0 1.5 2.2 3.3 6.8 15.0 22.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 10 10 10 10 10 10 20 30 40 = Tolerance Code J = 5% K = 10% M = 20% The C case has limited availability. Where possible D case should be substituted. 26 Capacitance (nom.) (F) @ = Failure Rate Level Exponential: M = 1.0% per 1000 hours P = 0.1% per 1000 hours R = 0.01% per 1000 hours S = 0.001% per 1000 hours Weibull: B = 0.1% per 1000 hours C = 0.01% per 1000 hours +25C +85/125C (%) (%) = Optional Surge Current A = 10 cycles at 25C B = 10 cycles at -55C and +85C = Packaging Bulk Standard \TR=7" Tape & Reel \TR13=13" Tape & Reel \W=Waffle Pack CWR09 Series MIL-C-55365/4 ELECTRICAL RATINGS FOR CWR09 CAPACITORS MIL-C-55365/4 Part Number (See Note) Case Size Rated Capacitance Voltage (nom.) (85C) (F) (volts) CWR09K*334@ CWR09K*684@ CWR09K*105@ CWR09K*155@ CWR09K*225@ CWR09K*475@ CWR09K*685@ CWR09K*106@ CWR09K*156@ A B C D E F G G H 25 25 25 25 25 25 25 25 25 CWR09M*224@ CWR09M*474@ CWR09M*684@ CWR09M*105@ CWR09M*155@ CWR09M*335@ CWR09M*475@ CWR09M*685@ A B C D E F G H CWR09N*104@ CWR09N*154@ CWR09N*224@ CWR09N*334@ CWR09N*474@ CWR09N*684@ CWR09N*105@ CWR09N*155@ CWR09N*225@ CWR09N*335@ CWR09N*475@ A A B B C D E F F G H Dissipation Factor (max.) -55C (%) Max. ESR 100 kHz +25C Style CWR09 (Ohms) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 15.0 7.5 6.5 6.5 3.5 2.5 1.2 1.4 1.0 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 18.0 10.0 8.0 6.5 4.5 2.5 1.5 1.3 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 22.0 17.0 14.0 12.0 8.0 7.0 6.0 4.0 2.5 2.0 1.5 +25C (A) +85C (A) +125C (A) 0.33 0.68 1.0 1.5 2.2 4.7 6.8 10.0 15.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 4.0 10 10 10 10 10 20 20 30 40 12 12 12 12 12 24 24 36 48 6 6 6 6 6 6 6 6 6 35 35 35 35 35 35 35 35 0.22 0.47 0.68 1.0 1.5 3.3 4.7 6.8 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 10 10 10 10 10 10 20 30 12 12 12 12 12 12 24 36 50 50 50 50 50 50 50 50 50 50 50 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 10 10 10 10 10 10 10 10 20 20 30 12 12 12 12 12 12 12 12 24 24 36 NOTE: To complete the MIL-C-55365/4 Part Number, additional information must be added: * = Termination Finish B = Gold Plated C = Hot Solder Dipped K = Solder Fused DC Leakage (max.) = Tolerance Code J = 5% K = 10% M = 20% The C case has limited availability. Where possible D case should be substituted. +25C +85/125C (%) (%) Contact your local AVX sales office for latest qualification status. @ = Failure Rate Level Exponential: M = 1.0% per 1000 hours P = 0.1% per 1000 hours R = 0.01% per 1000 hours S = 0.001% per 1000 hours Weibull: B = 0.1% per 1000 hours C = 0.01% per 1000 hours = Optional Surge Current A = 10 cycles at 25C B = 10 cycles at -55C and +85C = Packaging Bulk Standard \TR=7" Tape & Reel \TR13=13" Tape & Reel \W=Waffle Pack 27