1. General description
The 74LVC2G07 provides two non-inverting buffers.
The output of this device is an open drain and can be connected to other open-drain
outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this
device in a mixed 3.3 V and 5 V environment.
Schmitt trigger action at all inputs makes the circuit tolerant for slower input rise and fall
time.
This device is fully specified for partial power-down applications using IOFF. The IOFF
circuitry disables the outpu t, preventing the damaging ba ckflow current through the device
when it is powered down.
2. Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V
5 V tolerant input/output for interfacing with 5 V logic
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8-B/JESD36 (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115 -A ex ce ed s 200 V
24 mA output drive (VCC =3.0V)
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Inputs accept voltages up to 5 V
Multiple package options
Specified from 40 C to +85 C and 40 C to +125 C
74LVC2G07
Buffers with open-drain outputs
Rev. 8 — 23 September 2015 Product data sheet
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 2 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
3. Ordering information
4. Marking
[1] The pin 1 indicator is located on the lo wer left corner of the device, below the marking code.
5. Functional diagram
Table 1. Ordering information
Type number Package
Temperatur e range Name Description Version
74LVC2G07GW 40 C to +125 C SC-88 plastic surface-mounted package; 6 leads SOT363
74LVC2G07GV 40 C to +125 C TSOP6 plastic surface-mounted package (TSOP6); 6 leads SOT457
74LVC2G07GM 40 C to +125 C XSON6 plastic extremely thin small outline package;
no leads; 6 terminals; body 1 1.45 0.5 mm SOT886
74LVC2G07GF 40 C to +125 C XSON6 plastic extremely thin small outline package;
no leads; 6 terminals; body 1 10.5 mm SOT891
74LVC2G07GN 40 C to +125 C XSON6 extremely thin small outline package; no leads;
6 terminals; body 0.9 1.0 0.35 mm SOT1115
74LVC2G07GS 40 C to +125 C XSON6 extremely thin small outline package; no leads;
6 terminals; body 1.0 1.0 0.35 mm SOT1202
74LVC2G07GX 40 C to +125 C X2SON6 plastic thermal extremely thin small outline package;
no leads; 6 terminals; body 1 0.8 0.35 mm SOT1255
Table 2. Marking
Type number Marking code[1]
74LVC2G07GW V7
74LVC2G07GV V07
74LVC2G07GM V7
74LVC2G07GF V7
74LVC2G07GN V7
74LVC2G07GS V7
74LVC2G07GX V7
Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram (one driver)
PQE
$ <
$ <
$ <
PQE
$ <
PQD
<
$
*1'
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 3 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
6. Pinning information
6.1 Pinning
6.2 Pin description
Fig 4. Pin configuration SOT363 and SOT457 Fig 5. Pin configuration SOT886
/9&*
$ <
*1'
$ <
DDE
9&&
/9&*
*1'
DDE
$
$
9
&&
<
<
7UDQVSDUHQWWRSYLHZ
Fig 6. Pin configuration SOT891, SOT1115 and
SOT1202 Fig 7. Pin co nfiguration SOT1255 (X2SON6)
/9&*
*1'
DDJ
$
$
9
&&
<
<
7UDQVSDUHQWWRSYLHZ
9&&*1
'
$ <
$ <
/9&*
7UDQVSDUHQWWRSYLHZ
DDD
Table 3. Pin description
Symbol Pin Description
1A 1 data input
GND 2 ground (0 V)
2A 3 data input
2Y 4 data output
VCC 5 supply voltage
1Y 6 data output
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 4 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
7. Functional description
[1] H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.
8. Limiting values
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For SC-88 and SC-74 packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
For X2SON6 and XSON6 packages: above 118 C the value of Ptot derates linearly with 7.8 mW/K.
9. Recommended operating conditions
Table 4. Function table[1]
Input nA Output nY
LL
HZ
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +6.5 V
IIK input clampi n g cu rre nt VI<0V 50 - mA
VIinput voltage [1] 0.5 +6.5 V
IOK output clamping current VO<0V 50 - mA
VOoutput voltage Active mode [1] 0.5 +6.5 V
Power-down mode [1][2] 0.5 +6.5 V
IOoutput current VO=0V to6.5V - 50 mA
ICC supply current - 100 mA
IGND ground current 100 - mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation Tamb =40 C to +125 C[3] - 250 mW
Table 6. Recommended operating con ditions
Symbol Parameter Conditions Min Typ Max Unit
VCC supply voltage 1.65 - 5.5 V
VIinput voltage 0 - 5.5 V
VOoutput voltage Active mode 0 - 5.5 V
Power-down mode; VCC =0V 0 - 5.5 V
Tamb ambient temperature 40 - +125 C
t/V input transition rise and
fall rate VCC = 1.65 V to 2.7 V - - 20 ns/V
VCC = 2.7 V to 5.5 V - - 10 ns/V
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 5 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
10. Static characteristics
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb =40 C to +85 C[1]
VIH HIGH-level input
voltage VCC = 1.65 V to 1.95 V 0.65 VCC --V
VCC = 2.3 V to 2.7 V 1.7 - - V
VCC = 2.7 V to 3.6 V 2.0 - - V
VCC = 4.5 V to 5.5 V 0.7 VCC --V
VIL LOW-level input
voltage VCC = 1.65 V to 1.95 V - - 0.35 VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 2.7 V to 3.6 V - - 0.8 V
VCC = 4.5 V to 5.5 V - - 0.3 VCC V
VOL LOW-level output
voltage VI = VIH or VIL
IO = 100 A; VCC = 1.65 V to 5.5 V - - 0.10 V
IO = 4 mA; VCC = 1.65 V - - 0.45 V
IO = 8 mA; VCC = 2.3 V - - 0.30 V
IO = 12 mA; VCC = 2.7 V - - 0.40 V
IO = 24 mA; VCC = 3.0 V - - 0.55 V
IO = 32 mA; VCC = 4.5 V - - 0.55 V
IIinput leakage current VI = 5.5 V or GND;
VCC =0Vto5.5V [2] -0.1 5A
IOZ OFF-state output
current VI = VIH or VIL; VO = VCC or GND;
VCC = 5.5 V -0.1 10 A
IOFF power-off leakage
current VI or VO = 5.5 V; VCC = 0 V - 0.1 10 A
ICC supply current VI = 5.5 V or GND; IO = 0 A;
VCC = 1.65 V to 5.5 V -0.110A
ICC additional supply
current per pin; VI = VCC 0.6 V; IO = 0 A;
VCC = 2.3 V to 5.5 V [2] -5500A
CIinput capacitance - 2.5 - pF
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 6 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
[1] All typical values are measured at Tamb = 25 C.
[2] These typical values are measured at VCC =3.3V.
Tamb =40 C to +125 C
VIH HIGH-level input
voltage VCC = 1.65 V to 1.95 V 0.65 VCC --V
VCC = 2.3 V to 2.7 V 1.7 - - V
VCC = 2.7 V to 3.6 V 2.0 - - V
VCC = 4.5 V to 5.5 V 0.7 VCC --V
VIL LOW-level input
voltage VCC = 1.65 V to 1.95 V - - 0.35 VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 2.7 V to 3.6 V - - 0.8 V
VCC = 4.5 V to 5.5 V - - 0.3 VCC V
VOL LOW-level output
voltage VI = VIH or VIL
IO = 100 A; VCC = 1.65 V to 5.5 V - - 0.10 V
IO = 4 mA; VCC = 1.65 V - - 0.70 V
IO = 8 mA; VCC = 2.3 V - - 0.45 V
IO = 12 mA; VCC = 2.7 V - - 0.60 V
IO = 24 mA; VCC = 3.0 V - - 0.80 V
IO = 32 mA; VCC = 4.5 V - - 0.80 V
IIinput leakage current VI = 5.5 V or GND;
VCC =0Vto5.5V --20 A
IOZ OFF-state output
current VI = VIH or VIL; VO = VCC or GND;
VCC = 5.5 V --10 A
IOFF power-off leakage
current VI or VO = 5.5 V; VCC = 0 V - - 20 A
ICC supply current VI = 5.5 V or GND; IO = 0 A;
VCC = 1.65 V to 5.5 V --40A
ICC additional supply
current per pin; VI = VCC 0.6 V; IO = 0 A;
VCC = 2.3 V to 5.5 V --5000A
Table 7. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 7 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
11. Dynamic characteristics
[1] Typical values are measured at Tamb =25C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2] tpd is the same as tPLZ and tPZL.
[3] CPD is used to determine the dynamic power dissipation (PDin W).
PD=C
PD VCC2fiN+(CLVCC2fo) where:
fi= input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CLVCC2fo) = sum of outputs.
12. Waveforms
Table 8. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 9.
Symbol Parameter Conditions 40 C to +85 C40 C to +125 CUnit
Min Typ[1] Max Min Max
tpd propagation delay nA to nY; see Figure 8 [2]
VCC = 1.65 V to 1.95 V 1.0 3.5 6.7 1.0 8.4 ns
VCC = 2.3 V to 2.7 V 0.5 2.4 4.3 0.5 5.5 ns
VCC = 2.7 V 1.0 2.3 4.2 1.0 5.3 ns
VCC = 3.0 V to 3.6 V 0.5 2.6 3.7 0.5 4.7 ns
VCC = 4.5 V to 5.5 V 0.5 1.5 2.9 0.5 3.7 ns
CPD power dissipation
capacitance VI = GND to VCC; VCC = 3.3 V [3] -6.5- - -pF
Measurement points are given in Table 9.
VOL is the typical output voltage drop that occur with the output load.
Fig 8. The input (nA) to output (nY) propagation delays
PQD
W3/=
9;
Q<RXWSXW
Q$LQSXW
9,
9&&
9090
92/
*1'
W3=/
90
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 8 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Table 9. Measurement points
Supply voltage Input Output
VCC VMVMVX
1.65 V to 1.95 V 0.5 VCC 0.5 VCC VOL + 0.15 V
2.3 V to 2.7 V 0.5 VCC 0.5 VCC VOL + 0.15 V
2.7 V 1.5 V 1.5 V VOL + 0.3 V
3.0 V to 3.6 V 1.5 V 1.5 V VOL + 0.3 V
4.5 V to 5.5 V 0.5 VCC 0.5 VCC VOL + 0.3 V
Test data is given in Table 10.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 9. Test circuit for measuring switching times
9(;7
9&&
9,92
PQD
'87
&/
57
5/
5/
*
Table 10. Test data
Supply voltage Input Load VEXT
VCC VItr, tfCLRLtPZL, tPLZ
1.65 V to 1.95 V VCC 2.0 ns 30 pF 1 k2 VCC
2.3 V to 2.7 V VCC 2.0 ns 30 pF 500 2 VCC
2.7 V 2.7 V 2.5 ns 50 pF 500 6 V
3.0 V to 3.6 V 2.7 V 2.5 ns 50 pF 500 6 V
4.5 V to 5.5 V VCC 2.5 ns 50 pF 500 2 VCC
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 9 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
13. Package outline
Fig 10. Package outline SOT363 (SC-88)
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 10 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 11. Package outline SOT457 (TSOP6)
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
627 6&
Z%
0
ES
'
H
SLQ
LQGH[ $
$
/S
4
GHWDLO;
+(
(
Y0$
$%
\
VFDOH
F
;

 PP
3ODVWLFVXUIDFHPRXQWHGSDFNDJH7623OHDGV 627
81,7 $ESF'(+(/S4\ZY
PP 









H
 
  
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV




$




74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 11 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 12. Package outline SOT886 (XSON6)
5HIHUHQFHV
2XWOLQH
YHUVLRQ
(XURSHDQ
SURMHFWLRQ ,VVXHGDWH
,(& -('(& -(,7$
627 02
VRWBSR


8QLW
PP
PD[
QRP
PLQ
  












$
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
1RWHV
,QFOXGLQJSODWLQJWKLFNQHVV
&DQEHYLVLEOHLQVRPHPDQXIDFWXULQJSURFHVVHV
;621SODVWLFH[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGVWHUPLQDOVERG\[[PP 627
$E



'(HH

//
WHUPLQDO
LQGH[DUHD
'
(
H
H
$
E
/
/
H
PP
VFDOH
[

[

$
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 12 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 13. Package outline SOT891 (XSON6)
WHUPLQDO
LQGH[DUHD
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
627
627


;621SODVWLFH[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGVWHUPLQDOVERG\[[PP
'
(
H
H
$
E
/
/
H
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
PP 





$
PD[ E (


'HH
/


/

$
PD[
 
$
î

î

1RWH
&DQEHYLVLEOHLQVRPHPDQXIDFWXULQJSURFHVVHV
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 13 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 14. Package outline SOT1115 (XSON6)
5HIHUHQFHV
2XWOLQH
YHUVLRQ
(XURSHDQ
SURMHFWLRQ ,VVXHGDWH
,(& -('(& -(,7$
627
VRWBSR


8QLW
PP
PD[
QRP
PLQ
  





 



$
'LPHQVLRQV
1RWH
,QFOXGLQJSODWLQJWKLFNQHVV
9LVLEOHGHSHQGLQJXSRQXVHGPDQXIDFWXULQJWHFKQRORJ\
;621H[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGV
WHUPLQDOVERG\[[PP 627
$E



'(HH
/



/
PP
VFDOH
WHUPLQDO
LQGH[DUHD
'
(
î
HH
H
/
/
E
î
$$
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 14 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 15. Package outline SOT1202 (XSON6)
5HIHUHQFHV
2XWOLQH
YHUVLRQ
(XURSHDQ
SURMHFWLRQ ,VVXHGDWH
,(& -('(& -(,7$
627
VRWBSR


8QLW
PP
PD[
QRP
PLQ
  





 



$
'LPHQVLRQV
1RWH
,QFOXGLQJSODWLQJWKLFNQHVV
9LVLEOHGHSHQGLQJXSRQXVHGPDQXIDFWXULQJWHFKQRORJ\
;621H[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGV
WHUPLQDOVERG\[[PP 627
$E



'(HH
/



/
PP
VFDOH
WHUPLQDO
LQGH[DUHD
'
(
î
HH
H
/
E

/
î
$
$
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 15 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Fig 16. Package outline SOT1255 (X2SON6)
5HIHUHQFHV
2XWOLQH
YHUVLRQ
(XURSHDQ
SURMHFWLRQ ,VVXHGDWH
,(& -('(& -(,7$
627
VRWBSR


8QLW
PP
PD[
QRP
PLQ
   
  
$
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
;621SODVWLFWKHUPDOHQKDQFHGH[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGV
WHUPLQDOVERG\[[PP 627
$'

'K(H
HE

/Y\

\
     
   

PP
VFDOH
$ %
SLQ
,'DUHD
;
/
[
H

'K
[

H
$%
Y
'
(
&
\
&
\
GHWDLO;
$
$
E
[
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 16 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
14. Abbreviations
15. Revision history
Table 11. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
TTL Transistor-Transistor Logic
Table 12. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74LVC2 G07 v.8 20150923 Product data sheet - 74LVC2 G07 v.7
Modifications: •Added type number 74LVC2G07GX (SOT1255/X2SON6).
74LVC2 G07 v.7 20120704 Product data sheet - 74LVC2 G07 v.6
Modifications: •Package outli n e drawing of SOT886 (Figure 12) modified.
74LVC2 G07 v.6 20111130 Product data sheet - 74LVC2 G07 v.5
Modifications: •Legal pages updated.
74LVC2 G07 v.5 20100806 Product data sheet - 74LVC2 G07 v.4
74LVC2 G07 v.4 20070521 Product data sheet - 74LVC2 G07 v.3
74LVC2 G07 v.3 20040908 Product data sheet - 74LVC2 G07 v.2
74LVC2 G07 v.2 20040319 Product data sheet - 74LVC2 G07 v.1
74LVC2 G07 v.1 200 30825 Product data sheet - -
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 17 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
16. Legal information
16.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semicond uctors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre va il.
Product specificat ion — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Se miconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggreg ate and cumulative li ability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and with out
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applicat ions where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconducto rs products in such equipment or
applications and ther efore such inclu sion and/or use is at the cu stomer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using NXP Semiconductors product s, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suit able and fit for t he customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by custom er’s
third party custo mer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and product s using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third p arty
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or the gr ant,
conveyance or implication of any license under any copyrights, patents or
other industrial or inte llectual property rights.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contain s data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specificatio n.
74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2015. All rights reserved.
Product data sheet Rev. 8 — 23 September 2015 18 of 19
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It i s neit her qua lified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automot ive specifications and standards, custome r
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such au tomotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconduct ors for an y
liability, damages or failed product claims resulting from custome r design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-En glish (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
16.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors 74LVC2G07
Buffers with open-drain outputs
© NXP Semiconductors N.V. 2015. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 23 September 2015
Document identifier: 74LVC2G07
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
18. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 3
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Functional description . . . . . . . . . . . . . . . . . . . 4
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
9 Recommended operating conditions. . . . . . . . 4
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 16
15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 16
16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 17
16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17
16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
17 Contact information. . . . . . . . . . . . . . . . . . . . . 18
18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19