LX200-4620-C - Artesyn Technologies, Inc.

OUTPUT SPECIFICATIONS

Voltage adjustability Vout on singles -8%/+16%

+5V output on multiple ±20%

Remote sense ±10%

Line regulation Single outputs ±0.2%

(LL to HL, FL) Multiple: +5V output ±0.2%

Multiple: aux. outputs, Note 5 ±0.5%

Load regulation Single outputs: ±0.2%

(20% to 100% FL) Multiple: +5V output ±1.0%

Multiple: -5V output ±4.0%

Multiple: ±12V, 24V, Note 5 ±2.0%

Cross regulation 5A load step on main output 1.0%

Auxiliary outputs, Note 5

Transient response 25% di/dt 1% max. dev., 1ms recov.

Temperature coefficient Main/single output ±0.02%/°C

Multiple: auxiliary outputs ±0.04%/°C

Overvoltage protection Main/single output 130% ±10% Vout

Output power limit Multiples: 300W Pout

primary power limited

Singles: 105%-120% Iout

current foldback

Short circuit protection All outputs Yes

INPUT SPECIFICATIONS

Input voltage range LX200-46xx models, 175 to 264VAC

See Note 3 (230VAC version)

LX200-76xx models, 98 to 132VAC

autorange version 190 to 264VAC

Drop-out voltage 90VAC

Input frequency 50Hz/60Hz

Input surge current 25A max.

Safety ground 115VAC, 60Hz 1.6mA

leakage current 230VAC, 50Hz 2.5mA

Remote OFF Logic 0 on ROF

LX200 SERIES

Flexible single and muliple outputs

[ 2 YEAR WARRANTY ]

• 200W continuous, 300W peak output power

• Industry standard footprint, low profile

• Conducted noise to meet EN55022 class B

• AC and DC input voltage options in same package

• Efficiency up to 88%

• Optional power sharing/VME signals board

• Autoranging input option

The LX200 series offers 200 Watts of continuous output power in a low profile

industry standard footprint. With two single output options and a flexible

multiple output version, the series can address most power requirements as

standard. The design is specifically tailored to allow full flexibility and

modifications to meet customer applications can be implemented with relative

ease. The LX200 AC input series meets the safety requirements of EN60950,

VDE0805, UL1950 and CSA C22.2 No. 950. Input conducted noise levels meet

the requirements of FCC and EN55022 class B. LX200 series power supplies

are ideal for use in applications such as point-of-sale equipment, central and

public telecom power systems and network equipment.

SPECIFICATION

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

PAGE 1

ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS

Conducted emissions EN55022, level A

Radiated emissions EN55022, level B

ESD air EN61000-4-2, level 3 Perf. criteria 1

ESD contact EN61000-4-2, level 4 Perf. criteria 1

Surge EN61000-4-5, level 3 Perf. criteria 1

Fast transients EN61000-4-4, level 3 Perf. criteria 1

Radiated immunity EN61000-4-3, level 3 Perf. criteria 2

Conducted immunity EN61000-4-6, level 3 Perf. criteria 2

GENERAL SPECIFICATIONS

Hold-up time 110/230VAC 28ms

Efficiency 82% min.

Isolation voltage Input/output 3000VAC

Input/chassis 1500VAC

Switching frequency Fixed 44kHz

Approvals and EN60950, VDE0805, UL1950

standards See Note 7 CSA C22.2 No. 950

Weight 1.3kg (46oz)

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating 0°C to +70°C

Non-operating –25°C to +85°C

0°C to +40°C ambient, 200W

convection cooled

40°C to 70°C ambient, Derate linearly

convection cooled to 25% full load

Peak (0°C to 40°C, max. 10s) 300W

Relative humidity Non-condensing 5% to 95% RH

Altitude Operating 10,000 feet max.

Non-operating 30,000 feet max.

Vibration Operating, 5–50Hz 0.05mm pk-pk

Operating, 50–100Hz 0.025mm pk-pk

Non-operating 100mm drop on

chassis face

OVERLOAD/SHORT CIRCUIT PROTECTION

The overload/short circuit protection mechanisms are different for the single

output models and the multiple output model.

The single output models will current limit when the output load reaches

105-120% of maximum load during overload or short circuit conditions.

The unit will operate in a constant current mode making the single output

models suitable for battery charging applications.

The multiple output model uses a power limiting function. When the total

output power reaches 300W the outputs will foldback to the values detailed

below:

Output Foldback Value

+5V 15A continuous

+12V 4A continuous

+24V 2A continuous

–5V/–12V Protected by 4A Multi Fuse™

The outputs will not foldback until the total output power exceeds the maxi-

mum power limits. This allows the units to have a peak power capability

but it requires that care must be taken not to permanently overload any

individual output. The +5V, +12V and +24V outputs are not individually pro-

tected and it is recommended that the maximum continuous load does not

exceed the value given in the output specifications. The -5V and -12V out-

puts are individually protected by a 4A Multi Fuse™ and the maximum con-

tinuous load should not exceed the value given in the output specifications.

OUTPUT OUTPUT CURRENTS RIPPLE MODEL NUMBER (3)

VOLTAGE MAX (1) PEAK (2) RMS PK-PK 230VAC AUTORANGE

+5.0V 20.0A 40.0A 0.2% 2.0% LX200-4620 LX200-7620

–5.0V 4.0A 10.0A 0.2% 2.0%

–12.0V 4.0A 10.0A 0.2% 2.0%

+12.0V 8.0A 20.0A 0.2% 2.0%

+24.0V 4.0A 10.0A 0.2% 2.0%

24.0V (4) 9.0A – 0.1% 1.0% LX200-4624 LX200-7624

48.0V (4) 4.5A – 0.1% 1.0% LX200-4617 LX200-7617

Notes

1 The multiple output LX200 has a continuous output power rating of 200W.

The single-output versions have a continuous output power rating of

216W.

2 Peak power figures for individual outputs on the multiple output unit are

for less than 10 seconds duration. The overall peak power for the unit is

300W for 10 seconds duration.

3 The LX200 is available with a standard 230VAC input operation (order

LX200-46xx) or the input board can be fitted with an autorange circuit

which automatically senses the input voltage and switches to the

appropriate voltage range (order LX200-76xx).

4 Single output models are adjustable -8%, +16%.

5 A 10% load on the main output is necessary to maintain regulation on the

auxiliaries at full load (multiple output model).

6 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

7 Consideration should be given to measuring the temperature on the main

transformer (T1) when the power supply is installed in end-use equipment.

The measured temperature on T1 must not exceed 90°C. For further

information on the LX200 safety approvals, contact Computer Products.

Options

• DC input models for 24V and 48V operation are detailed on the LX200,

LX350 and LX550 series DC/DC converter data sheet on page 170.

• A cover and signals board are available as options. To order, add the

suffixes ‘-C’, ‘-S’ respectively, see table below.

SIGNALS (OPTIONAL)

An optional signals board supplies the following VME utility bus signals:

ACF (AC Fail) Logic 1 to 0 transition occurs >10ms before outputs fall

below 80%-85% of nominal in the event of input failure.

DCF (DC Fail) Logic 0 occurs if output falls below 85%–95% of nominal.

SRS (System Reset) Logic 1 for system OK (AC and DC good and reset

times [200ms])

PM Power Monitor signal, proportional to the output power, ratio of

20mV/W ±10%.

PS Power Share connections, to be joined for parallel operation of two

or more units, ensuring equal power share. For power share

operation unit outputs need to be set to ±5% of each other and

should be connected in star configurations with the load as star

centre.

OPTIONS SUFFIX EXAMPLE

None LX200-76xx

Cover -C LX200-76xx-C

Signals -S LX200-76xx-S

Cover and Signals -C-S LX200-76xx-C-S

PIN CONNECTIONS

PIN NO INPUT MULTI O/P SINGLE O/P SIGNALS

1 Earth PS PS SRS

2 N/C ACF ACF ACF

3 Neutral SRS SRS DCF

4 N/C ROF ROF PM

5 Live +5VS 0VS PS

6 N/C +5V 0V ROF

7 115V +5V 0V +VS

8 Link +5V 0V 0V

9 N/C 0V 0V –

10 N/C 0V 0V –

11 N/C 0V +Vout –

12 N/C –5V +Vout –

13 N/C –12V +Vout –

14 N/C +12V +Vout –

15 N/C +24V +VS –

200 Watt

AC/DC universal input switch mode power supplies

AC/DC POWER SUPPLIES |

200W AC

PAGE 2

http://www.artesyn.com

SIGNALS

1 8

115

ALL DIMENSIONS IN INCHES (mm)

1.25

(31.75) 1.25

(31.75)

INPUT SYSTEM

O. K. LED OUTPUT

9.18 (233.2)

7.15 (181.6)

1.02

(25.9)

8.52 (216.4)

.42

(10.7)

2.06

(52.4)

6.27 (159.3)

0.83

(21)

2.05

(52)

0.59

(15)

Mechanical notes

A Input and output connectors are 15 way terminal block, 5mm pitch.

Signals board option is 8 way, single row right angle 0.1”, Molex

910210128, this mates with 90147 1108 or equivalent.

B Customer fixing screws (A) are M3 isometric. They must not penetrate into

unit by more than 5mm.

International Safety Standard Approvals

Multiple output and 24V Single output units are approved to these

standards. Safety approval pending for 48V output model. See Note 7

EN60950/VDE0805 Reg. File No. 90371

UL1950 File No. E136005

CSA C22.2 No. 950 File No. LR41062C/LR101320

50W

200W

0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C

DERATING CURVE (See Notes 1 & 2)

Output Power (Watts)

NATURAL

CONVECTION

COOLING

10% MIN. LOAD FOR AUXILIARY REGULATION

300W

PEAK OUTPUT

POWER

200 Watt

AC/DC universal input switch mode power supplies

AC/DC POWER SUPPLIES |

200W AC

PAGE 3

PAGE 4

http://www.artesyn.com

DS_LX200AC_19980401.PDF

2000

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.