1
0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
FH35C Series
2013.3
■Features
1. 0.3 mm pitch, Dual-sided connector
This connector utilizes both a top and bottom contact and
provides design flexibility.
2.
Improved FPC retention force achieved through the use of
our proprietary contact structure and a back flip actuator.
FPC retention force (in the horizontal direction) is about 2.5 times
greater than similar products produced by other companies.
3. Supports high speed transmissions
By utilizing its excellent impedance characteristics, it is capable
of supporting high speed transmissions.
(Differential pairs of identical contacts allows for better
transmission characteristics and eDP (ver1.3) and compatibility
to MIPI(D−PHY) specifications.)
4. Delivered with actuator open
To reduce installation time and costs, the actuator is delivered
in the open position and eliminates the need to open the
actuator before FPC insertion.
5. Easy FPC Insertion
Equipped with tapered guides at the FPC insertions point, they
help to create a smoother FPC insertion operation.
6. Compatible with 0.2mm thick FPC
The FH35C was designed to be used with 0.2 mm FPC. (Using
the appropriate FPC will prevent deformation and problems
that may occur during the insertion and mating processes.)
7. Bottom side protection
The bottom surface is over-molded and provides added
protection to the contacts (no exposure). This allows the PCB
space under the connector to be used for additional patterning.
8. Halogen Free
Chlorine and bromine levels do not exceed the standard values
as defined by IEC 61249-2-21. (Br: 900 ppm or less, Cl : 900
ppm or less, Br + Cl : 1,500 ppm or less)
9. Compatible with Automatic Mounting
Tape-and-reel packaging is available for use with pick-and-place
machines. Connectors are available on 5000 or 500 piece reels.
(The outer diameter of an embossed reel is
Ø
180mm)
&'#&bb(*e^c
(#'bb
%#.bb
●3.2 mm in depth
●At Time of FPC Insertion
●Lock Completion State
FH35C Differential Impedance
130ps rise time (20-80%)
2
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Product Specifications
Ratings
Current rating: 0.2 A (Note 1)
Voltage rating: AC 30 Vrms
Operating temperature Range: –55 to +85°C (Note 2)
Operating temperature Range: 90% or less of relative
humidity
(No dew condensation is allowed)
Storage temperature Range: -10 to +50°C (Note 3)
Storage temperature Range: 90% or less of relative
humidity
(No dew condensation is allowed)
With specifi cations compatible with FPC contacts t = 0.2 ± 0.03 gold plating
Items Specifi cations Conditions
1.Insulation Resistance No less than 50 Mø Measured at 100 V DC
2.Withstand Voltage No fl ashover or breakdown Conduct 90 V AC for one minute
3.Contact Resistance 100 mø MAX.
* Including FPC conductor resistance AC 20 mV MAX (1 KHz), 1 mA
4.Mating Cycles Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts 10 times
5.Vibration Resistance
No electric outage of 1 µs or greater
Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts
At the frequency of 10-55 Hz, half amplitude 0.75 mm,
and 10 cycles in each of three axial directions
6.Shock Resistance
No electric outage of 1 µs or greater
Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts
Acceleration: 981 m/s2
Duration: 6 ms, sine half-wave, 3 cycles in each of the
3 axis each in both directions
7. Humidity Resistance
(Steady State)
Contact resistance: no more than 100 mø
Insulation Resistance: 50 mø or more
No breakage, cracks, or loosened parts
Left to stand for 96 hours at the temperature of 40°C
and the humidity of 90% to 95%
8.Temperature Cycles
Contact resistance: no more than 100 mø
Insulation Resistance: 50 mø or more
No breakage, cracks, or loosened parts
Temperature:-55➝ +15 to+35➝ +85➝ +15 to +35°C
Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes
5 cycles with the above conditions
9. Solder Heat
Resistance
No deformation in appearance or marked instability of
contacts
Refl ow: According to the Recommended Temperature Profi le
Manual soldering: 350± 10°C for 5± 1 sec.
(Note 1) Use at 70% of the current rating when all pins are energized with the stated current rating.
(Note 2) Temperature rise at the time of electrifi cation is included.
(Note 3) The term “storage” refers to the long-term storage condition of unused products before mounting on the PCB.
The operating temperature and humidity ranges apply to non-energized state after PCB mounting.
(Note 4) The above specifi cations are representative of this series. Please refer to “drawing for approval” for offi cial individual agreement.
■Materials
Part Materials Treatment UL Regulation
Insulator LCP Gray Recognition
Polyamide resin Black
Contact Phosphor bronze Nickel barrier Gold plating ------
Metal fi tting Phosphor bronze Pure tin refl ow plating
■Product Number Structure
Refer to the chart below when searching for the part number nomenclature.
Please select connectors listed in this catalog when placing orders.
The characteristics and specifications of the products described in this catalog are for reference only.
Please make sure to check the latest delivery specifications before the time of purchase.
FH 35 C − 35S − 0.3 SHW (50)
❶❷❸ ❹ ❺ ❻ ❼
❻ Contact Form
SHW: SMT horizontal staggered array mount type
❼ Specifi cations:
(50): standard product (5000 connectors per reel)
(99): 500 connectors per reel
❶ Series Name: FH
❷ Series No.: 35
❸ C: dual-sided, halogen-free product
❹ Number of contacts : 9 to 51
❺ Contact Pitch: 0.3 mm
3
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Connector Dimensions
■Connector Dimension Table Unit: mm
Product No. HRS No.
The number of contacts
ABCDE
FH35C-9S-0.3SHW(50) CL580-2910-5-50 9 4.3 1.8 2.4 3.03 3.73
FH35C-11S-0.3SHW(50) CL580-2917-4-50 11 4.9 2.4 3 3.63 4.33
FH35C-13S-0.3SHW(50) CL580-2925-2-50 13 5.5 3 3.6 4.23 4.93
FH35C-15S-0.3SHW(50) CL580-2919-0-50 15 6.1 3.6 4.2 4.83 5.53
FH35C-17S-0.3SHW(50) CL580-2916-1-50 17 6.7 4.2 4.8 5.43 6.13
FH35C-19S-0.3SHW(50) CL580-2921-1-50 19 7.3 4.8 5.4 6.03 6.73
FH35C-21S-0.3SHW(50) CL580-2922-4-50 21 7.9 5.4 6 6.63 7.33
FH35C-23S-0.3SHW(50) CL580-2911-8-50 23 8.5 6 6.6 7.23 7.93
FH35C-25S-0.3SHW(50) CL580-2912-0-50 25 9.1 6.6 7.2 7.83 8.53
FH35C-27S-0.3SHW(50) CL580-2918-7-50 27 9.7 7.2 7.8 8.43 9.13
FH35C-31S-0.3SHW(50) CL580-2923-7-50 31 10.9 8.4 9 9.63 10.33
FH35C-33S-0.3SHW(50) CL580-2913-3-50 33 11.5 9 9.6 10.23 10.93
FH35C-35S-0.3SHW(50) CL580-2926-5-50 35 12.1 9.6 10.2 10.83 11.53
FH35C-37S-0.3SHW(50) CL580-2914-6-50 37 12.7 10.2 10.8 11.43 12.13
FH35C-39S-0.3SHW(50) CL580-2915-9-50 39 13.3 10.8 11.4 12.03 12.73
FH35C-41S-0.3SHW(50) CL580-2924-0-50 41 13.9 11.4 12 12.63 13.33
FH35C-45S-0.3SHW(50) CL580-2909-6-50 45 15.1 12.6 13.2 13.83 14.53
FH35C-49S-0.3SHW(50) ––––––– 49 16.3 13.8 14.4 15.03 15.73
FH35C-51S-0.3SHW(50) CL580-2920-9-50 51 16.9 14.4 15 15.63 16.33
The products with no HRS No. are currently under planning. Please contact our sales representative for questions concerning the number of contacts.
V9ZiV^aYgVl^c\
EdaVg^inbVg`
9^heaVnZY
=GHbVg`
8Vk^inCd#
9^heaVnd[i]Z
cjbWZgd[XdgZh
V
)#'
%#**
&#&*
&#)*
(¤%#&*
%#)¤%#&
%#%*¤%#&*
%#((¤%#&
%#&*¤%#&*
&#-
%#.¤%#&
%#(* ;E8/%#'
7¤%#&
&#+
%#&*
(
%#+
:¤%#&
9
%#&'
8¤%#&
%#+¤%#&
%#(¤%#&
%#&'
%#+¤%#&
6¤%#&*
(#(*
.%é
Note 1: The lead coplanarity of contact and reinforcing metal fi tting is a MAX of 0.1 mm.
2: This product packaged on tape-and-reel. See the package specifi cation diagram for details.
3: Dimensions may be changed for sink mark prevention due to improvement, etc.
In addition, black dots, etc., may occur in the mold resin but they have no effect on quality.
4: This product is halogen-free.
(Br content: 900 ppm or less; CI content: 900 ppm or less; Br + CL total content: 1,500 ppm or less)
4
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Recommended Land Dimensions
N
M
%#%' N
c"&$'
c &$'
%#%' N
%#%' M
c &$'
c"&$'
%#%' M
GZXdbbZcYZYBZiVaBVh`I]^X`cZhh/i2%#&
8dccZXidg^bV\Z¬BdjciZYhjg[VXZ
AVcYeViiZgc^bV\Z
%#,¤%#%'
7
%#(¤%#%'
%#.¤%#%'
8
%#'¤%#%'
%#**¤%#%'
'#)¤%#%'
%#+*¤%#%'
(#+
%#+ %#'(¤%#%'
%#+
%#'(¤%#%'
%#(¤%#%'
%#+
%#(¤%#%'
%#+
(#+
%#-¤%#%( '#&*¤%#%( %#+*¤%#%(
%#'¤%#%(
%#.*¤%#%(
8%#*¤%#%(
%#)¤%#%(
7
%#(*
%#'
■Recommended Land and Metal Mask Dimensions
■Recommended Land and Metal Mask Dimensions Unit: mm
Product No. HRS No. No. of Contacts B C
FH35C-9S-0.3SHW(50) CL580-2910-5-50 9 1.8 2.4
FH35C-11S-0.3SHW(50) CL580-2917-4-50 11 2.4 3
FH35C-13S-0.3SHW(50) CL580-2925-2-50 13 3 3.6
FH35C-15S-0.3SHW(50) CL580-2919-0-50 15 3.6 4.2
FH35C-17S-0.3SHW(50) CL580-2916-1-50 17 4.2 4.8
FH35C-19S-0.3SHW(50) CL580-2921-1-50 19 4.8 5.4
FH35C-21S-0.3SHW(50) CL580-2922-4-50 21 5.4 6
FH35C-23S-0.3SHW(50) CL580-2911-8-50 23 6 6.6
FH35C-25S-0.3SHW(50) CL580-2912-0-50 25 6.6 7.2
FH35C-27S-0.3SHW(50) CL580-2918-7-50 27 7.2 7.8
FH35C-31S-0.3SHW(50) CL580-2923-7-50 31 8.4 9
FH35C-33S-0.3SHW(50) CL580-2913-3-50 33 9 9.6
FH35C-35S-0.3SHW(50) CL580-2926-5-50 35 9.6 10.2
FH35C-37S-0.3SHW(50) CL580-2914-6-50 37 10.2 10.8
FH35C-39S-0.3SHW(50) CL580-2915-9-50 39 10.8 11.4
FH35C-41S-0.3SHW(50) CL580-2924-0-50 41 11.4 12
FH35C-45S-0.3SHW(50) CL580-2909-6-50 45 12.6 13.2
FH35C-49S-0.3SHW(50) ––––––– 49 13.8 14.4
FH35C-51S-0.3SHW(50) CL580-2920-9-50 51 14.4 15
Note 5: 'n' represents the number of contacts.
5
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Recommended FPC Dimensions
W
GZ[ZgZcXZ\ZdbZign
B^hVa^\cbZciX]ZX`bVg`
c &$'
c"&$'
%#%,
%#* &#'*
%#'¤%#%(
'#-*¤%#(Hi^[[ZcZg[^ab
C
'#'*¤%#&
'#&¤%#&
&#,*¤%#(
%#-*¤%#&
%#,*¤%#&
%#'¤%#&
%#( %#%)
"%#%(
%#+¤%#%,
7
%#+¤%#%,
%#'
%#&¤%#%'
%#(¤%#%,
%#( %#%)
"%#%(
8
;¤%#%*
%#(¤%#%,
%#+
%#(
B6MG%#'
O
%#%' O
%#%' O
■Recommended FPC Dimensions Unit: mm
Product No. HRS No. No. of Contacts B C F
FH35C-9S-0.3SHW(50) CL580-2910-5-50 9 1.8 2.4 3
FH35C-11S-0.3SHW(50) CL580-2917-4-50 11 2.4 3 3.6
FH35C-13S-0.3SHW(50) CL580-2925-2-50 13 3 3.6 4.2
FH35C-15S-0.3SHW(50) CL580-2919-0-50 15 3.6 4.2 4.8
FH35C-17S-0.3SHW(50) CL580-2916-1-50 17 4.2 4.8 5.4
FH35C-19S-0.3SHW(50) CL580-2921-1-50 19 4.8 5.4 6
FH35C-21S-0.3SHW(50) CL580-2922-4-50 21 5.4 6 6.6
FH35C-23S-0.3SHW(50) CL580-2911-8-50 23 6 6.6 7.2
FH35C-25S-0.3SHW(50) CL580-2912-0-50 25 6.6 7.2 7.8
FH35C-27S-0.3SHW(50) CL580-2918-7-50 27 7.2 7.8 8.4
FH35C-31S-0.3SHW(50) CL580-2923-7-50 31 8.4 9 9.6
FH35C-33S-0.3SHW(50) CL580-2913-3-50 33 9 9.6 10.2
FH35C-35S-0.3SHW(50) CL580-2926-5-50 35 9.6 10.2 10.8
FH35C-37S-0.3SHW(50) CL580-2914-6-50 37 10.2 10.8 11.4
FH35C-39S-0.3SHW(50) CL580-2915-9-50 39 10.8 11.4 12
FH35C-41S-0.3SHW(50) CL580-2924-0-50 41 11.4 12 12.6
FH35C-45S-0.3SHW(50) CL580-2909-6-50 45 12.6 13.2 13.8
FH35C-49S-0.3SHW(50) ––––––– 49 13.8 14.4 15
FH35C-51S-0.3SHW(50) CL580-2920-9-50 51 14.4 15 15.6
Note 6: FPC should be designed so that the dimension of N is 0.5 mm or more.
6
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
BFPC material composition (Recommended specifications)
Surface treatment
Copper foil
Base adhesive
Base film
Reinforcement material adhesive
Stiffener film
3
35
25
25
40
75
203
1.Single-Sided FPC
Name of material Material property Thickness (µm)
2.Double-Sided FPC
3.Additional notes on FPC
Cover lay film
Cover adhesive
Surface treatment
Through-hole copper plating
Copper foil
Base adhesive
Base film
Base adhesive
1. The FPC material composition is to be used as a reference example. Please make sure that the thickness of the FPC mating area is
0.2± 0.03 mm as previously referred to in the product specification section.
2. Please contact the FPC manufacturer for the details on its material composition.
* When using Double-Sided FPC, the copper foil on the back side of the FPC should be eliminated. This is to prevent any unintentional unlocking
due to bent or deformed FPC.
Cover lay film
Cover adhesive
Polyimide 1 mil
Copper foil
Cover adhesive
Cover lay film
Reinforcement material adhesive
Stiffener film
Cu ½ oz
Thermoset adhesive
Polyimide 1 mil
Thermoset adhesive
Polyimide 1 mil
Total
（18）
25
25
25
25
197
（25）
（25）
Polyimide 1 mil
Nickel undercoat 1 to 5 µm+
Gold plating 0.2 µm
Cu
Cu ½ oz
Thermoset adhesive
Polyimide 1 mil
Thermoset adhesive
（25）
（25）
3
15
18
18
25
18
Name of material Material property Thickness (µm)
Nickel undercoat 1 to 5µm+
Gold plating 0.2µm
Cu 1 oz
Heat hardened adhesive
Polyimide 1 mil
Heat hardened adhesive
Polyimide 3 mil
Total
7
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
● Emboss Carrier Tape Dimensions
(with tape width of 24 mm or less)
● Emboss Carrier Tape Dimensions
(with tape width of 32 mm or more)
BPackaging Specifications
●Packaging Specification Dimensions
&#* %#&
%
&#,*¤%#&
=¤%#&
<¤%#(
&#,*¤%#&
?¤%#&
<¤%#(
?¤%#&
%#(
'#'* -¤%#&
'
)¤%#&
-¤%#&
'
)¤%#&
%#(
'#'*
G%#,*
G%#,*
¢&#* %#&
%
¢&#* %#&
%
&#, %#&*
%
JcgZZa^c\Y^gZXi^dc
Ide8dkZgIVeZ
:bWdhh8Vgg^ZgIVeZ
&%%bbdgbdgZ
:beinVgZV
IgV^aZgVgZV$ZbeinVgZV
&+%bbdgbdgZ
)%%bbdgbdgZ
AZVYZg6gZV
¢(-%
¢-%
@/GZZa>ccZgL^Yi]
A/GZZaDjiZgL^Yi]
¢&(
■Reel Dimensions Unit: mm
Product No. HRS No. No. of Contacts G H J K L
FH35C-9S-0.3SHW(50) CL580-2910-5-50 9 16 - 7.5 17.4 21.4
FH35C-11S-0.3SHW(50) CL580-2917-4-50 11 16 - 7.5 17.4 21.4
FH35C-13S-0.3SHW(50) CL580-2925-2-50 13 16 - 7.5 17.4 21.4
FH35C-15S-0.3SHW(50) CL580-2919-0-50 15 16 - 7.5 17.4 21.4
FH35C-17S-0.3SHW(50) CL580-2916-1-50 17 16 - 7.5 17.4 21.4
FH35C-19S-0.3SHW(50) CL580-2921-1-50 19 16 - 7.5 17.4 21.4
FH35C-21S-0.3SHW(50) CL580-2922-4-50 21 24 - 11.5 25.4 29.4
FH35C-23S-0.3SHW(50) CL580-2911-8-50 23 24 - 11.5 25.4 29.4
FH35C-25S-0.3SHW(50) CL580-2912-0-50 25 24 - 11.5 25.4 29.4
FH35C-27S-0.3SHW(50) CL580-2918-7-50 27 24 - 11.5 25.4 29.4
FH35C-31S-0.3SHW(50) CL580-2923-7-50 31 24 - 11.5 25.4 29.4
FH35C-33S-0.3SHW(50) CL580-2913-3-50 33 24 - 11.5 25.4 29.4
FH35C-35S-0.3SHW(50) CL580-2926-5-50 35 24 - 11.5 25.4 29.4
FH35C-37S-0.3SHW(50) CL580-2914-6-50 37 24 - 11.5 25.4 29.4
FH35C-39S-0.3SHW(50) CL580-2915-9-50 39 24 - 11.5 25.4 29.4
FH35C-41S-0.3SHW(50) CL580-2924-0-50 41 24 - 11.5 25.4 29.4
FH35C-45S-0.3SHW(50) CL580-2909-6-50 45 24 - 11.5 25.4 29.4
FH35C-49S-0.3SHW(50) - 49 32 28.4 14.2 33.4 37.4
FH35C-51S-0.3SHW(50) CL580-2920-9-50 51 32 28.4 14.2 33.4 37.4
8
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Temperature Profile
Applicable Conditions
Reflow System : Far-infrared, hot-air reflow
Reflow chamber atmosphere : Air
Solder : Paste type Sn/3.0 Ag/0.5 Cu
(M705-GRN360-K2-V;
Senju Metal Industry Co., Ltd.)
Test PCB : PCB material and size
Glass epoxy 25 × 50 × 0.8 mm
Land dimensions
0.3 × 0.65, 0.3 × 0.8 mm
Metal Mask : Thickness : 0.1 mm
Opening dimension
0.23 × 0.55, 0.23 × 0.65 mm
The provided temperature profile shown is based on the
conditions described above.
Variations may occur due to the changing conditions such
as solder paste types, different manufacturers, PCB size,
and other soldering materials. Please check the mounting
conditions before use.
B6M'*%8î
HiVgi
IZbeZgVijgZ8
I^bZhZXdcYh
'*8î
+%hZX#
+%hZX#
.%id&'%hZX#
EgZ]ZVi^c\i^bZ HdaYZg^c\i^bZ
%
*%
&%%
&*% &*%8î
'%%8î
'(%8î
'%%
'*%
9
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
[Operational Method]
BConnector Handling and Precautions
1. Initial mounted status (before inserting FPC)
2.FPCinsertionmethod
3.ConfirmationofinsertedFPC(whenthetopcontactisused)
These connectors are delivered with the actuator in an open
position,removing the need to operate the actuator before inserting
the FPC.
[Caution]
• Do not close the actuator if the FPC has not been inserted yet.
• If the actuator is closed without the FPC, it can narrow the contact
gap and increases the insertion force.
❶ Ensure that the FPC is held parallel to the surface of the PCB and is then completely inserted into the connector.
[Caution]
• Do not insert the FPC if actuator is closed.
• If the actuator is closed and if the FPC is twisted during insertion, it can cause contact deformation and /or contact
failure.
Properinsertion Skewedinsertion Shallowinsertion
I]ZVXijVidg^hhjeea^ZY^ci]ZdeZcXdcY^i^dc^c
i]ZZbWdhhZYiVeZVcYgZZaeVX`V\^c\#
I]ZVXijVidg^hhjeea^ZY^ci]ZdeZcXdcY^i^dc^c
i]ZZbWdhhZYiVeZVcYgZZaeVX`V\^c\#
7djcYVgnd[;E8
eViiZgch
7djcYVgnd[;E8
eViiZgch
:Y\Zd[]djh^c\deZc^c\
:Y\Zd[]djh^c\deZc^c\
❶
By visually comparing the edge of the connector housing opening with the exposed FPC pattern, faulty
insertion conditions such as a skewed or shallow insertion can be prevented.
These connectors are small and thin, so care needs to be used when handling this product.
Please refer to this section after confirming the following points:
❶
E87
ＦＰＣ
6XijVidgPDeZcZYR
ＦＰＣ
6XijVidgP8adhZYR
E87
"EgdeZg^chZgi^dc" ">begdeZg^chZgi^dc"
10
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
GdiViZGdiViZ
9dcdiegZhhYdlcdc
i]ZVXijVidgdg]djh^c\
9dcdiegZhhYdlcdc
i]ZVXijVidgdg]djh^c\
BV`ZXdciVXidci]Z
b^YYaZedgi^dcd[i]ZVXijVidg
BV`ZXdciVXidci]Z
b^YYaZedgi^dcd[i]ZVXijVidg
9dcdigdiViZ
i]ZVXijVidgWn
Z^i]Zgd[^ihZcY
ed^cih
9dcdigdiViZ
i]ZVXijVidgWn
Z^i]Zgd[^ihZcY
ed^cih
;a^e^ijeVcYa^[i^ije
9d cdi Veean Vcn [dgXZ dc i]Z VXijVidg ^c i]Z
Y^gZXi^dch]dlcdcXZ ^ci]Z[jaa deZcedh^i^dc#
DeZc^c\^iidVcVc\aZ\gZViZgi]Vc.%dgbdgZ
l^aaWgZV`dgYVbV\Zi]ZXdccZXidg
BV`ZXdciVXidci]Z
b^YYaZedgi^dcd[i]Z
VXijVidg
9dcdigdiViZi]Z
VXijVidgWnZ^i]Zg
d[^ihZcYed^cih
[Operational Method]
BConnector Handling and Precautions
4.Lockingmethod
❶Operate the actuator in a rotational manner and press it down.
Rotate and push down on the middle portion or the entire width of the actuator using the finger tip.
Be sure to distribute the pressure evenly across the actuator, pressing down on only one side of the actuator may
damage the actuator. Excessive force on the housing can also lead to damage or malfunction.
5.RemovingtheFPC
❶Slowly rotate the actuator in an upward motion. After it is unlocked, the FPC can be removed.
❷When unlocking the actuator, always touch the middle portion of the actuator.
Again, be sure to distribute the pressure evenly across the actuator, pressing down on only one side may damage the
actuator. The actuator has a maximum opening of 90°. Trying to open it more than that or applying any unnecessary
force to the actuator will cause damage and possibly failure of the connector.
This connector uses a back flip type structure. The direction of the FPC insertion and that of the actuator are different from
front flip type connectors. Do not to try to open the actuator from the FPC side.
11
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
Hi^[[ZcZg[^ab
ＦＰＣ ＦＰＣ
Hi^[[ZcZg[^ab
BdjciZYeVgihi]Vi^ciZg[ZgZl^i];E8
ＦＰＣ
Hi^[[ZcZg[^ab
8Vh^c\
Hi^[[ZcZg[^ab
E87
E87 E87
E87
;^mVi^dcd[;E8
[Operational Method]
BConnector Handling and Precautions
6.FPCRouting
❶FPC should be routed in a manner that no strain or load is exerted onto the FPC. Disregarding this note may result in
unintentional disconnection or damage to the FPC, which can lead to defects such as contact failure.
Caution:
•Do not allow the FPC or stiffener to touch the casings, housings or any other items.
• When routing the FPC, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side
motion. Additionally, make sure that no excessive upward or downward force is applied to the connector.
• When routing the FPC, make sure that the routing provides a stress free path for the FPC and keep the stiffener parallel
to the PCB. Observe proper bend radiuses.
•Do not place or mount any parts that will interfere with the FPC routing.
12
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 03/2013. Contents are subject to change without notice for the purpose of improvements.
Connector
FPC(for mounting connectors)
[Precautions for mounting the connectors onto PCB]
BConnector Handling and Precautions
◆PCB Warpage
Minimize PCB warpage. Although the coplanarity of this connector is 0.1 mm or less, mounting problems and defects may
occur when excess PCB warpage is present.
◆Mounting onto FPC
When mounting the connector on FPC, be sure to use a reinforcing board as it will make it easier to handle and more
reliable. We recommend that you use glass epoxy, 0.3 mm thickness or more.
◆Load to Connector
Do not apply any external force of 0.5 N or more to the connector before mounting it. Excessive forces may cause the
connector to break. Do not insert the FPC or operate the actuator before mounting the connector.
◆Load to board
• Divide the base material for multiple PCBs
• Fasten the PCBs with screws
Care should be taken so that the load is not exerted on the PCBs during the assembly process when conducting
operations including those previously described. Failure to adhere to these precautions may result in connector damage
and ultimately failure.
◆Hand Soldering Precautions
When performing repairs and hand soldering is being used, please take note of the following precautions:
❶Do not perform reflow or hand soldering while the FPC is inserted into the connector.
❷Do not apply excessive heat to the connector and make sure that the soldering iron only makes contact with the connector
lead. This precaution prevents connector deformation or melting.
❸Do not apply excessive amounts of solder or flux. Using excessive amounts of solder or flux on the contacts may cause
the solder to wick into the contact areas or the shaft of the actuator. This can result in contact failure and/or rotational
problems with the actuator.
Additionally, if excessive solder or flux is applied to the reinforcing metal fittings, problems may develop to
the rotation function of the actuator and could lead to connector damage and ultimately lead to failure.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
FH35C-41S-0.3SHW(50) FH35C-13S-0.3SHW(50) FH35C-35S-0.3SHW(50) FH35C-27S-0.3SHW(50) FH35C-23S-
0.3SHW(50) FH35C-11S-0.3SHW(99) FH35C-19S-0.3SHW(99) FH35C-27S-0.3SHW(99) FH35C-35S-0.3SHW(99)
FH35C-45S-0.3SHW(99) FH35C-17S-0.3SHW(50) FH35C-25S-0.3SHW(50) FH35C-13S-0.3SHW(99) FH35C-23S-
0.3SHW(99) FH35C-33S-0.3SHW(99) FH35C-39S-0.3SHW(99) FH35C-9S-0.3SHW(99) FH35C-21S-0.3SHW(50)
FH35C-31S-0.3SHW(50) FH35C-37S-0.3SHW(50) FH35C-51S-0.3SHW(50) FH35C-15S-0.3SHW(99) FH35C-21S-
0.3SHW(99) FH35C-31S-0.3SHW(99) FH35C-37S-0.3SHW(99) FH35C-51S-0.3SHW(99) FH35C-11S-0.3SHW(50)
FH35C-19S-0.3SHW(50) FH35C-45S-0.3SHW(50) FH35C-33S-0.3SHW(50) FH35C-39S-0.3SHW(50) FH35C-9S-
0.3SHW(50) FH35C-17S-0.3SHW(99) FH35C-25S-0.3SHW(99) FH35C-41S-0.3SHW(99) FH35C-15S-0.3SHW(50)
FH35C-49S-0.3SHW(99) FH35C-49S-0.3SHW(50)
