Audio ICs AM radio / FM IF stereo system IC BA1450S The BA1450S is a tuner system IC for electronic tuning for AM radios, FM IF, and MPX. It has been developed for Hi-Fi component applications. The MPX VCO circuit requires no adjustment, which will enable a reduction in the number of production line processes. In particular, the laser lock technique used in the VCO means that no external adjustment is required. Applications Synthesized tuner for Hi-Fi components. Features 1) Built-in AM monaural radio, FM IF amplifier / detector, and FM stereo demodulator. 2) DTS (both SD and IF count) compatible. 3) Built-in reference voltage power supply provides good shortwave band frequency stability. 4) Good FM stability. 5) The FM MPX VCO uses laser locking making adjustment and external components unnecessary. 6) Built-in forced monaural operation function for MPX (VCO stops, and LED goes off). 7) Low cutoff of audio is possible to improve AM fidelity. 8) MPX VCO stops in AM mode. 9) Audio muting is possible when an IF request is made. Absolute maximum ratings (Ta = 25C) Recommended operating conditions (Ta = 25C) 295 Audio ICs Block diagram 296 BA1450S Audio ICs BA1450S Input / output circuits 297 Audio ICs 298 BA1450S Audio ICs BA1450S 299 Audio ICs 300 BA1450S Audio ICs BA1450S Electrical characteristics (unless otherwise noted, Ta = 25C and VCC = 5V) FM IF MPX signal source: fIN = 10.7MHz, modulation 1kHz, 75kHzdev (100%) FM IF MPX signal source fIN = 10.7MHz, modulation 19kHz 7.5kHzdev (10%) IF MPX signal sourceAM: fIN = 1000kHz, modulation 1kHz 30% 301 Audio ICs Measurement circuit 302 BA1450S Audio ICs BA1450S Application example Electrical characteristics curves 303 Audio ICs BA1450S External dimensions (Units: mm) 304 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0