MC3303 MC3403 - MC3503 (R) LOW POWER QUAD BIPOLAR OPERATIONAL AMPLIFIERS .. .. .. . SHORT-CIRCUIT PROTECTED OUTPUTS CLASS AB OUTPUT STAGE FOR MINIMAL CROSSOVER DISTORTION SINGLE SUPPLY OPERATION : + 3 V TO + 36V DUAL SUPPLIES : 1.5V TO 18V LOW INPUT BIAS CURRENT : 500nA MAX INTERNALLY COMPENSATED SIMILAR PERFORMANCE TO POPULAR UA741 N DIP14 (Plastic Package) P TSSOP14 (Thin Shrink Small Outline Package) DESCRIPTION The MC3403 is a low-cost, quad operational amplifier with true differential inputs. The device has electrical characteristics similar to the popular UA741. However the MC3403, has several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3.0 volts or as high as 36 volts with quiescent currents about one third of those associated with the UA741 (on a per amplifier basis). The common-mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. D SO14 (Plastic Micropackage) ORDER CODES Part Number Temperature Range Package N D P MC3303 o -40 C, +105 C * * * MC3403 0oC, +70oC * * * MC3503 -55oC, +125oC * * * o Example : MC3403N PIN CONNECTIONS (top view) Output 1 1 14 Output 4 Inverting Input 1 2 - - 13 Inverting Input 4 Non-inverting Input 1 3 + + 12 Non-inverting Input 4 11 VCC - VCC + 4 Non-inverting Input 2 5 + + 10 Non-inverting Input 3 Inverting Input 2 6 - - 9 Inverting Input 3 8 Output 3 Output 2 7 August 1998 1/11 MC3303 - MC3403 - MC3503 SCHEMATIC DIAGRAM (each amplifier) Output V Q19 (1 stage) CC Q18 Q20 Q17 Q27 Q16 Q23 C1 8pF R4 31k Q29 Q28 Q1 Q15 Non-inverting input R6 0.7k Q22 Q13 R3 25 Q24 Q9 R2 37 k Q12 Inverting input Q21 Q2 Q6 Q5 Q3 Q30 Q11 Q25 Q4 Q7 R5 8.2k Q10 Q14 Q8 R1 12k V CC (Ground) SINGLE SUPPLY DUAL SUPPLIES +3V to +30V V CC V CC 1.5V to 18V 1.5V to 18V V CC V CC ABSOLUTE MAXIMUM RATINGS Symbol Parameter MC3503 MC3403 MC3303 Unit 18 or 36 18 or 36 18 or 36 V Differential Input Voltage 36 36 36 V Input Voltage (note 1) 18 18 18 V VCC Supply Voltage Vid Vi - Output Short-circuit Duration (note 2) Infinite - Ptot Power Dissipation 500 500 500 Toper Operating Free-air Temperature Range -55 to +125 0 to +70 -40 to +105 o C Tstg Storage Temperature Range -65 to +150 -65 to +150 -65 to +150 o C Notes : 2/11 mW 1. For supply voltages less than 15V, the absolute maximum input voltage is equal to the supply voltage. 2. Any of the amplifier outputs can be shorted to ground indefinitely ; however more than one should not be simultaneously shorted as the maximum junction temperature will be exceeded. MC3303 - MC3403 - MC3503 ELECTRICAL CHARACTERISTICS VCC = 15V, Tamb = +25oC, (unless otherwise specified) Symbol MC3303 - MC3403 MC3503 Parameter Min. VIO IIO Iib Avd SVR ICC Typ. Max. Input Offset Voltage (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. 1 5 6 Input Offset Current o Tamb = 25 C Tmin. Tamb Tmax. 2 50 200 Input Bias Current Tamb = 25oC Tmin. Tamb Tmax. 40 500 800 Vicm CMR IOS Vopp tr, tf KOV nA nA 50 25 200 Supply Voltage Rejection Ratio (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. 77 77 90 V/mV dB mA Supply Current, all Amp, no Load Tamb = 25oC 2.8 MC3503 MC3503 Input Common Mode Voltage Range Tamb = 25oC Tmin. Tamb Tmax. + 13 + 13 70 70 90 Output Short-circuit Current 10 30 12 10 10 12 13.5 13 0.35 0.5 Output Voltage Swing o Tamb = 25 C dB = = = = 10k 2k 2k 10k Slew Rate (VI = 10V RL = 2k, CL = 100pF, o Tamb = 25 C, unity gain) Rise Time and Fall Time (VO = 20mV, RL = 2k, CL = 100pF Tamb = 25oC, unity gain) 0.18 Overshoot (VI = 20mV, RL = 2k, CL = 100pF, o Tamb = 25 C, unity gain) % Output Impedance Bom Power Bandwidth (RL = 2k, CL = 100pF, Av = 1, Tamb = 25oC, VO = 2Vpp, THD 5%) 9 Unity Gain Bandwidth (VO = 10mV, RL = 2k, CL = 100pF, Tamb = 25oC, unity gain) 1 en Gain Bandwidth Product (VO = 10mV, RL = 2k, CL = 100pF, o f = 100kHz, Tamb = 25 C) Total Harmonic Distortion (f = 1kHz, Av = 20dB, RL = 2k, VO = 2Vpp, CL = 100pF, Tamb = 25oC) Equivalent Input Noise Voltage (f = 1kHz, Rs = 100) s 10 Input Impedance THD mA V/s ZI GBP 45 V RL RL RL RL ZO B 7 4 8 5 V - 15 - 15 Common Mode Rejection Ratio (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. Tmin. Tamb Tmax. SR mV Large Signal Voltage Gain (VO = 10V, RL = 2k) o Tamb = 25 C Tmin. Tamb Tmax. Tmin. Tamb Tmax. Unit 0.3 1 75 M kHz MHz MHz 0.7 1 % 0.02 43 nV Hz 3/11 MC3303 - MC3403 - MC3503 ELECTRICAL CHARACTERISTICS (continued) Symbol MC3303 - MC3403 - MC3503 Parameter Min. Typ. m Phase Margin DVIO Input Offset Voltage Drift Tmin. Tamb Tmax. 10 DIIO Input Offset Current Drift Tmin. Tamb 25oC 50 Channel Separation 120 VO1/V02 Max. 60 Unit Degrees o V/ C o pA/ C dB ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = Ground, Tamb = 25oC (unless otherwise specified) Symbol VIO IIO Iib Avd SVR ICC MC3303 - MC3403 - MC3503 Parameter Min. Typ. Max. Input Offset Voltage (RS 10k) Tamb = 25 C Tmin Tamb Tmax 1 5 6 Input Offset Current Tamb = 25oC Tmin. Tamb Tmax. 2 50 200 Input Bias Current Tamb = 25oC Tmin. Tamb Tmax. 40 500 800 mV nA nA Large Signal Voltage Gain (VO = 1.4 to 2.4V, RL = 2k) Tamb = 25oC Tmin. Tamb Tmax. 10 5 200 V/mV Supply Voltage Rejection Ratio (RS 10k) o Tamb = 25 C Tmin. Tamb Tmax. 77 77 90 dB Supply Current (All Amp) 2.5 MC3503 Vopp 4/11 Output Voltage Range (RL = 10k) VCC = +5V +5 < VCC +30V Unit 7 4 mA V 3.3 VCC+-2V 3.5 VCC+-1.7V MC3303 - MC3403 - MC3503 CIRCUIT DESCRIPTION The MC3403 is made using four internally compensated, two-stage operational amplifiers. The first stage of each consists of differential input devices Q24 and Q22 with input buffer transistors Q25 and Q21 and the differential to single ended converter Q3 and Q4. The first stage performs not only the first stage gain function but also performs the level shifting and transconductance reduction functions. By reducing the transconductance a smaller compensation capacitor (only 8pF) can be employed, thus saving chip area. ground, in single supply operation, without saturation either the input devices or the differential to single-ended converter. The transconductance reduction is accomplished by splitting the collectors of Q24 and Q22. Another feature of this input stage is that the input commonmode range can include the negative supply of Each amplifier is biased from an internal voltage regulator which has a low temperature coefficient thus giving each amplifier good temperature characteristics as well as excellent power supply rejection. The second stage consists of a standard current source load amplifier stage. The output stage is unique because it allows the output to swing to ground in single supply operation and yet does not exhibit any crossover distortion in split supply operations. This is possible because class AB operation is utilized. TYPICAL PERFORMANCE CURVES 20s/div. AV = 100 APPLICATION INFORMATION VOLTAGE REFERENCE WIEN BRIDGE OSCILLATOR 50k V CC R2 10k V CC 5k V CC 1/4 MC3403 10k VO V(ref) 1/4 MC3403 VO V(ref) = 1 V CC 2 R1 10k VO = R1 V CC R1 + R2 VO = 1 V CC 2 R R C C fO = 1 2 RC For f O = 1kHz R = 16k C = 0.01F 5/11 MC3303 - MC3403 - MC3503 APPLICATION INFORMATION (continued) COMPARATOR WITH HYSTERESIS HIGH IMPEDANCE DIFFERENTIAL AMPLIFIER e1 1 R C 1/4 MC3403 R R2 Hysteresis V OH a R1 VO R1 R1 1/4 MC3403 V(ref) eo 1/4 MC3403 b R1 VO VI 1 R C 1/4 MC3403 e2 e o = C (1 + a + b) ( e 2 - e 1 ) V OL VI H VI L V(ref) R1 [ VOL-V(re f) ] + V(ref) R1+ R2 R1 VI H = [ VOH-V(ref) ] + V(ref) R1+ R2 R1 H= [ VOH- VOL ] R1+ R2 VI L = R BI-QUAD FILTER V(re f ) = R fO = R C1 e R2 R2 = 100k I R3 = T N R2 100k 1/4 MC3403 C1 = 10C 1/4 MC3403 For : V(ref) V(ref) Bandpass output R3 V(ref) R1 R2 6/11 R1 TBP R 1/4 MC3403 R = 160k C = 0.001 F R1 = 1.6M R2 = 1.6M R3 = 1.6M 1 2 RC R1 = QR C C 1 VCC 2 1/4 MC3403 C1 Notch output Where T BP = Center frequency gain V(ref) T N = Passband notch gain f O = 1kHz Q = 10 T BP = 1 TN = 1 MC3303 - MC3403 - MC3503 APPLICATION INFORMATION (continued) FUNCTION GENERATOR R2 300k Triangle wave output V (ref) = 1 VCC 2 R3 75k V (ref) 1/4 MC3403 1/4 MC3403 R1 100k Square wave output V (ref) C R f= R1 + R2 4 CR f R1 f if R3 = R2 R1 R2 + R1 MULTIPLE FEEDBACK BANDPASS FILTER R3 C R1 VCC C eI 1/4 MC3403 eo CO C O = 10C R2 V (ref) Given fo = Center frequency ; choose values fo, C then A (fo) = Gain at center frequency V (ref) = 1 VCC 2 Q * foC R3 R1 = * 2A ( fo ) R1 R5 R2 = 4Q2 R1- R5* R3 = For less than 10% error from operational amplifier Qofo < 0.1 where fo and BW are expressed in Hz BW If source impedance varies, filter may be preceded with voltage follower buffer to stabilize filter parameters 7/11 MC3303 - MC3403 - MC3503 TYPICAL PERFORMANCE CURVES 8/11 MC3303 - MC3403 - MC3503 PM-DIP14.EPS PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP a1 B b b1 D E e e3 F i L Z Min. 0.51 1.39 Millimeters Typ. Max. 1.65 Min. 0.020 0.055 0.5 0.25 Inches Typ. 0.065 0.020 0.010 20 0.787 8.5 2.54 15.24 0.335 0.100 0.600 7.1 5.1 0.280 0.201 3.3 1.27 Max. DIP14.TBL Dimensions 0.130 2.54 0.050 0.100 9/11 MC3303 - MC3403 - MC3503 PM-SO14.EPS PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) A a1 a2 b b1 C c1 D E e e3 F G L M S 10/11 Min. Millimeters Typ. 0.1 0.35 0.19 Max. 1.75 0.2 1.6 0.46 0.25 Min. Inches Typ. 0.004 0.014 0.007 0.5 Max. 0.069 0.008 0.063 0.018 0.010 0.020 o 45 (typ.) 8.55 5.8 8.75 6.2 0.336 0.228 1.27 7.62 3.8 4.6 0.5 0.334 0.244 0.050 0.300 4.0 5.3 1.27 0.68 0.150 0.181 0.020 8o (max.) 0.157 0.208 0.050 0.027 SO14.TBL Dimensions MC3303 - MC3403 - MC3503 PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE Dim. Millimeters Min. Typ. A Min. Typ. 1.20 A1 0.05 A2 0.80 b c D 4.90 5.00 4.30 4.40 Max. 0.05 0.15 0.01 1.05 0.031 0.19 0.30 0.007 0.15 0.09 0.20 0.003 0.012 5.10 0.192 0.196 4.50 0.169 0.173 8o 0o 0.75 0.09 E E1 Inches Max. 1.00 6.40 e 0o l 0.50 0.60 0.039 0.041 0.20 0.252 0.65 k 0.006 0.177 0.025 8o 0.0236 0.030 ORDER CODE : Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a trademark of STMicroelectronics (c) 1998 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 11/11