Long Life Fan 60x60x76 mm San Ace 60L 9CRLA type General Specifications * Material .......................................... Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1) * Expected life .................................... See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Expected life at 40C is for reference only. * Motor protection function .................. Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 573. * Dielectric strength ........................... 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) * Insulation resistance ........................ 10 M or more with a 500 VDC megger (between lead wire conductors and frame) * Sound pressure level (SPL) ............... At 1 m away from the air inlet * Storage temperature ........................ -30 to +70C (Non-condensing) * Mass ............................................. 310 g Specifications The models listed below have pulse sensors with PWM control function. Rated voltage Operating voltage range Model no. [V] [V] Rated current Rated input PWM duty cycle* [%] [A] Rated speed [W] Inlet 12 9CRLA0612P0G001 10.8 to 13.2 100 20 3.0 0.4 36.0 4.8 Max. airflow [min-1] SPL Operating temperature Expected life [m3/min] [CFM] Max. static pressure [Pa] [inchH2O] [dB (A)] [C] [h] 2.1 0.64 74.1 22.6 1400 128 5.62 0.51 70 43 -20 to +70 100000/60C (135000/40C) Outlet 16500 17800 5000 5400 * PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%. The mark indicates Short Lead Time Service applicable models. See p. 626 for details. Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9CRLA0612P0G001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range 1400 5 1200 100% 4 1000 3 800 600 2 400 1 200 0 0 6 PWM PWM duty cycle Static pressure Static pressure 6 (inch H2O) (Pa) 12 VDC DC12 V 1600 50% 20% 0.5 1.0 1.5 2.0 0 10 20 30 40 50 60 70 80 Airflow 2.5 (m /min) 3 (CFM) 5 1600 1400 PWM duty cycle 100% PWM100% 18000 10.8 V/12 V/13.2 V 1200 14000 4 1000 12000 3 800 600 2 400 1 200 0 0 Voltage: 12 VDC DC12 V PWM frequency:kHz 25 kHz PWM25 16000 Fan speed (inch H2O) (Pa) PWM duty - Speed characteristics example 10000 8000 17800 min-1 16500 min-1 Inlet Outlet 6000 4000 2000 0.5 1.0 1.5 2.0 2.5 0 10 20 30 40 50 60 70 80 Airflow (m /min) 3 (CFM) 0 100 (%) PWM duty cycle PWM CATALOG No. C1097B001 '20.1.IT 381 Long Life Fan 60 mm sq. DC * Lead wire ....................................... Inlet Red Black Sensor Yellow Control Brown Outlet Orange Gray Sensor Purple Control White Dimensions (unit: mm) Outlet side Inlet side 4-o4.30.3 Mounting hole 40.3 760.5 40.3 600.5 500.3 4-o4.30.3 Mounting hole +50 300 0 Lead wire 600.5 500.3 (10) AWG 26 UL 1430 (10) Rotating direction 300 +50 0 Airflow direction Rotating direction DC Inlet side, Outlet side Long Life Fan 60 mm sq. Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) 500.3 59 59 500.3 62 29.7 4-o4.5 .7 29.7 Options Finger guards page: p. 558 Model no.: 109-139E, 109-139H Resin filter kits Model no.: 109-1003G page: p. 566 Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI), 109-1003F30 (30PPI), 109-1003F40 (40PPI) 382 CATALOG No. C1097B001 '20.1.IT Resin finger guards page: p. 565