SENSITRON SEMICONDUCTOR 15KPA SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR Data Sheet 1250, Rev. B Features * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * 15000W Peak Pulse Power capability on 10/1000 s waveform * Voltage-17.0 to 220 Volts * Excellent clamping capability * Repetition rate (duty cycle): 0.05% * Low incremental surge resistance * Fast response time: typically less than 1.0 ps from 0 volts to BV * Typical IR less than 1A above 10V * High temperature soldering guaranteed: 265C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension * UL Recognized File # E224235 MECHANICAL DATA Case:Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.1 gram P-600 1.0(25.4) MIN .360(9.1) .340(8.6) DIA .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA 1.0(25.4) MIN Dimensions in inches (milimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 15KPA17 thru types 15KPA220 Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform (NOTE 1) Peak Pulse Current of on 10-1000 s waveform (NOTE 1) Steady State Power Dissipation at TL=75 C Lead Lengths .375", (9.5mm) (NOTE 2) Peak Forward Surge Current, 8.3ms Sine-Wave Superimposed on Rated Load, (JEDEC Method) (NOTE 3) Operatings and Storage Temperature Range SYMBOL Pppm VALUE 15000 UNITS Watts Ippm SEE TABLE 1 Amps Pm(AV) 8.0 Watts IFSM 400.0 Amps Tj, Tstg -55 to +175 C Note: 1. Non-repetitive current pulse, per Figure 3 and derated above TA = 25C per Figure 2 2. Mounted on Copper Pad area of 0.8" x 0.8" (20 x 20mm) 3. 8.3ms single half sine-wave, or equivalent squave, Duty cycle=4 pulses per minute maximum * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR 15KPA SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR Data Sheet 1250, Rev. B UNI-POLAR BI-POLAR 15KPA17A 15KPA18A 15KPA20A 15KPA22A 15KPA24A 15KPA26A 15KPA28A 15KPA30A 15KPA33A 15KPA36A 15KPA40A 15KPA43A 15KPA45A 15KPA48A 15KPA51A 15KPA54A 15KPA58A 15KPA60A 15KPA64A 15KPA70A 15KPA75A 15KPA78A 15KPA85A 15KPA90A 15KPA100A 15KPA110A 15KPA120A 15KPA130A 15KPA150A 15KPA160A 15KPA170A 15KPA180A 15KPA200A 15KPA220A 15KPA240A 15KPA260A 15KPA280A 15KPA17CA 15KPA18CA 15KPA20CA 15KPA22CA 15KPA24CA 15KPA26CA 15KPA28CA 15KPA30CA 15KPA33CA 15KPA36CA 15KPA40CA 15KPA43CA 15KPA45CA 15KPA48CA 15KPA51CA 15KPA54CA 15KPA58CA 15KPA60CA 15KPA64CA 15KPA70CA 15KPA75CA 15KPA78CA 15KPA85CA 15KPA90CA 15KPA100CA 15KPA110CA 15KPA120CA 15KPA130CA 15KPA150CA 15KPA160CA 15KPA170CA 15KPA180CA 15KPA200CA 15KPA220CA 15KPA240CA 15KPA260CA 15KPA280CA PEAK REVERSE MAXIMUM REVERSE BREAKDOWN BREAKDOWN VOLTAGE VOLTAGE PULSE LEAKAGE CLAMPING TEST STANDOFF (V) (V) V V VOLTAGE CURREN CURRENT @ VRWM VOLTAGE BR BR IPP (A) IR (A) @IPP Vc (V) T (IT) mA MIN. @ IT MAX. @ IT VRWM (V) 5000 17 18.90 20.90 50 512.0 29.3 5000 18 20.00 22.10 50 485.0 30.9 20 22.20 24.50 20 437.0 1500 34.3 22 24.40 26.90 10 404.0 500 37.1 24 26.70 29.50 5 369.0 150 40.7 26 28.90 31.90 5 341.0 50 44.0 28 31.10 34.40 5 316.0 25 47.5 30 33.30 36.80 5 296.0 15 50.7 33 36.70 40.60 5 274.0 10 54.8 36 40.00 44.20 5 251.0 10 59.7 40 44.40 49.10 5 228.0 10 65.8 43 47.80 52.80 5 215.0 10 69.1 45 50.00 55.30 5 205.0 10 73.0 48 53.30 58.90 5 193.0 10 77.7 51 56.70 62.70 5 181.0 10 92.8 54 60.00 66.30 5 171.0 10 87.5 58 64.40 71.20 5 160.0 10 94.0 60 66.70 73.70 5 154.0 10 97.3 64 71.10 78.60 5 144.0 10 104.0 70 77.80 86.00 5 132.0 10 114.0 75 83.30 92.10 5 123.0 10 122.0 78 86.70 95.80 5 119.0 10 126.0 85 94.40 104.0 5 109.0 10 137.0 90 100.00 111.0 5 103.0 10 146.0 100 111.00 123.0 5 93.0 10 162.0 110 122.00 135.0 5 84.0 10 178.0 120 133.00 147.0 5 78.0 10 193.0 130 144.00 147.0 5 72.0 10 209.0 150 167.00 159.0 5 62.0 10 243.0 160 178.00 185.0 5 58.0 10 259.0 170 189.00 197.0 5 55.0 10 275.0 180 200.00 209.0 5 52.0 10 291.0 200 222.00 233.0 5 47.0 10 322.0 220 245.00 245.0 5 42.0 10 356.0 240 267.00 269.0 5 39.0 10 388.0 260 289.00 295.0 5 36.0 10 419.0 280 311.00 319.0 5 33.0 10 452.0 For bidirectional type having Vrwm of 40 volts and less, the IR limit is double. For parts without A , the VBR is + 10% * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR Data Sheet 1250, Rev. B Pppm PEAK PULSE POWER (KW) 10000 Non-repetitive pulse waveform shown in Fig. 3 T A = 25C 1000 100 10 1 0.1 1 10 100 1,000 10,000 100,000 td PULSE WIDTH (sec) FIG. 1 PEAK PULSE POWER RATING Fig.2 - Pulse Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% 87.5 75 62.5 50 37.5 25 12.5 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature (C) Fig.3 - Pulse Waveform 150 IPPM - Peak Pulse Current,% I RSM 15KPA SERIES TJ = 25C tr = 10 msec. Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM/2 10/1000 msec.Waveform as defined by R.E.A. 50 td 0 0 1.0 2.0 3.0 3.0 4.0 4.0 * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR GLASS SERIES 15KPA PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR Data Sheet 1250 Rev. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com *