Life Expectancy Minimum operations
Mechanical
Electrical Light Duty 3 x 105 at 3A, 120VAC
Medium Duty 1.8 x 105 at 6A, 120VAC
Operate Time (typical) 5ms at nominal coil voltage
Release Time (typical) 2ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 750Vrms contact to contact
(at sea level for 1 min.) 2000Vrms contact to coil except hermetically
sealed version which is 1600Vrms
1000 megohms min. at 20°C, 500VDC,
50% RH
Dropout Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -55°C (-67°F) to 90°C (194°F) Class B
-55°C (-67°F) to 115°C (239°F) Class F
Storage -55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Vibration 0.062" DA at 10–55 Hz, 10 g at 55–110 Hz
Shock
10g
Enclosure P.E.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
Approx. 11 grams
COIL
Power
At Pickup Voltage
(typical)
Standard coil: 250mW (48V coil: 341mW)
Sensitive coil: 175mW (48V coil: 182mW)
Class B: 2.0W 20°C (68°F) ambient
1.6W 40°C (104°F) ambient
Class F: 2.5W 20°C (68°F) ambient
2.1W 40°C (104°F) ambient
At nominal coil voltage
Standard coil: 38°C (68°F)
Sensitive coil: 28°C (50°F)
Temperature Max. 105°C (221°F) Class A
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
AZ8
2/02/16
MINIATURE
PC BOARD RELAY
FEATURES
•Subminiature size
•
High sensitivity, 110mW pickup
Coils to 48VDC
•Hermetically sealed version available
•Epoxy sealed for automatic wave soldering
•
Withstands 4kV standard IEEE Lightning Surge
Withstands 6kV IEEE Lightning Surge (special order)
Class B insulation (130°C) standard
Class F insulation (155°C) version available
UL, CUR file E44211
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A)
Ratings
Light Duty
Resistive load:
Max. switched power: 100W or 600VA
Max. switched current: 3A
Max. switched voltage: 150VDC or 300VAC
UL Rating: See chart on Page 3
Max. switched power: 180W or 1800VA
Max. switched current: 6A
Max. switched voltage: 150VDC or 300VAC
UL Rating: See chart on Page 3
Material Light duty: Silver
Medium duty: Silver nickel
Resistance < 100 milliohms initially
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Unsealed relays should not be dip cleaned.
5. Specifications subject to change without notice.
1 x 107
•VDE approved versions available (Class A Insulation only)