CNS 020
www.vishay.com Vishay Sfernice
Revision: 02-Mar-18 1Document Number: 60051
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Precision (0.01 % / 10 ppm/°C)
Through Hole Thin Film Conformal Coating Sil Resistor
DESIGN SUPPORT TOOLS
FEATURES
Tight TCR to 5 ppm/°C (in 0 °C; +70 °C)
Incorporates high stability thin film element
(0.1 % at + 70 °C at Pn during 1000 h)
Through hole (Sil)
100 to 10 M
Tight tolerance down to 0.01 %
Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
SCHEMATIC
Note
(1) 15 ppm/°C for R 1.5M
click logo to get started
Available
Models
STANDARD ELECTRICAL SPECIFICATIONS
MODEL RESISTANCE RANGE
RATED POWER
P70 °C
W
LIMITING ELEMENT
VOLTAGE
V
TOLERANCE
± %
TEMPERATURE
COEFFICIENT (1)
± ppm/°C
CNS 020 100 to 10M 0.5 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1 5, 10
CLIMATIC SPECIFICATIONS
Operating temperature
range -55 °C; +155 °C
MECHANICAL SPECIFICATIONS
Resistive material Nichrome
Substrate material Alumina
Terminals Tin / silver on Cu alloy
Protection Conformal epoxy coating
DIMENSIONS AND IMPRINTING CNS 020
In clear: model, Vishay logo and manufacturing code. On back: ohmic value (in ), tolerance (in %)
DIMENSION INCHES MILLIMETERS
A 0.330 8.38 max.
B 0.261 6.62 max.
C 0.020 0.51
D 0.200 5.08
E 0.125 3.17 min.
F 0.100 2.54 max.
G 0.010 0.25
G
F
A
D
C
E
B
CNS 020
www.vishay.com Vishay Sfernice
Revision: 02-Mar-18 2Document Number: 60051
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) 15 ppm/°C for R 1.5M
(2) For information only
TECHNICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
MATERIAL PASSIVATED NICHROME
Absolute TCR Standard (1) ± 10 ppm/°C -40 °C to +125 °C
On request ± 5 ppm/°C 0 °C to +70 °C
Power rating 0.5 W at +70 °C
0.3 W at +125 °C
Dissipation factor (in air) 1/RTH (2) 6.7 mW/°C
ENVIRONMENTAL TEST
TEST
REQUIREMENTS
CONDITIONS
NFC 83220
CECC40300
MIL-PRF
55182E
DRIFTS
(MAX.)
Overload ± 0.01 % ± 0.05 % 0.01 % 2.5 Un/5 s
Umax. < 2 Un
Temperature cycling ± 0.01 % ± 0.05 % 0.01 % -55 °C / +155 °C 5 cycles
CEI 63-2-14 Test No
Terminal strength ± 0.01 % ± 0.02 % 0.01 % CEI 68-2-21
Test Ua (pulling), Ub (bending), Uc (twisting)
Resistance to solder heat ± 0.01 % ± 0.02 % 0.01 % +260 °C / 10 s, CEI 68-2-20A
Test T6 (Met 1A)
Vibration ± 0.01 % ± 0.02 % 0.01 % 10 Hz to 500 Hz
10 g, 6 h Met B4; CEI 68-2-6 Test Fc
Climatic sequence
± 0.05 %
insulation resistance
> 102 M
- 0.05 %
-55 °C / +155 °C 6 cycles 95 % RH
RH 85 mbar
CEI68-1
Moisture
± 0.05 %
insulation resistance
> 102 M
- 0.02 %
56 days 95 % RH
+40 °C
CEI 68-2-3
High temperature storage ± 0.05 % - 0.05 % 1000 h / +155 °C
CEI 68-2-20A; Test B
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CNS020-301KF (preferred part number format)
GLOBAL MODEL VALUE TOLERANCE
CNS 020 Decimal: R, K or M
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
Historical Part Number example: CNS 020 301K 1 % (will continue to be accepted)
CNS 020 301K 1 %
HISTORICAL MODEL VALUE TOLERANCE
CNS 0 2 0 - 3 0 1KF
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED