FP..P Vishay Dale Metal Film Resistors, Pulse Withstanding Protective FEATURES * Special Vishay Dale design provides lightning withstand characteristics along with resistor Pb-free functionality Available * A thicker tin oxide power film system provides e3 lightning surge absorption capabilities * Higher turns ratio and glass substrate provide sharper fusing characteristic than the standard RoHS* COMPLIANT flameproof product line * Protect against a variety of electrical hazards which can change or destroy sensitive electronic equipment including high energy voltage surges caused by power line anomalies (direct power crosses or inductively coupled effects) and other momentary overvoltages * Lead (Pb)-free version is RoHS compliant STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING P70 C W 0.5 1 2 3 2 HISTORICAL MODEL RESISTANCE RANGE 10R - 1M 10R - 1M 9R - 1M5 9R - 1M 2R6 - 1M STANDARD TOLERANCE % 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 CUTOFF VALUE FP1/2P FP1/2P FP001P FP1P FP002P FP2P FP003P FP3P FP069P FP69P Notes: * Pulse withstanding capabilities are value dependent. * Value above the cutoff value, shown above, will meet all the surge test requirements shown on next page. 2K00 1K00 300R 250R 400R MARKING - DALE - Value - Tolerance - Style and case size - Date code (year/week) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FP002P1K00F9256B8 (preferred part numbering format) F P 0 GLOBAL MODEL 0 2 P 1 RESISTANCE VALUE (see Standard Electrical Specifications Table) K 0 0 F 9 TOLERANCE CODE 5 6 B 5555 = FP1/2P 6206 = FP001P 9256 = FP002P 9303 = FP003P 7532 = FP069P 8 PACKAGING (1) SPEC CODES F=1% G=2% J=5% R = Decimal K = Thousand M = Million 10R0 = 10 1K30 = 1.3 k 1M00 = 1.0 M 2 EK = Lead (Pb)-free, Bulk EA = Lead (Pb)-free, T/R B8 = Tin/Lead, Bulk CH = Tin/Lead, T/R (750 pieces) CJ = Tin/Lead, T/R (1000 pieces) Historical Part Number: FP2P 1K00 1% B8 (will continue to be accepted) FP2P 1K00 1% B8 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note: (1) Some packaging codes are model specific. * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 104 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31030 Revision: 23-Jul-07 FP..P Metal Film Resistors, Pulse Withstanding Protective Vishay Dale DIMENSIONS in inches [millimeters] B 1.500 0.125 [38.10 3.18] A D DIMENSIONS in inches [millimeters] GLOBAL MODEL B D FP1/2P 0.360 0.020 [9.14 0.51] 0.138 + 0.012 - 0.023 [3.51 + 0.31 - 0.58] 0.032 0.002 [0.81 0.05] FP001P 0.560 0.031 [14.22 0.79] 0.190 + 0.007 - 0.015 [4.83 + 0.18 - 0.38] 0.032 0.002 [0.81 0.05] FP002P 0.687 0.031 [17.45 0.79] 0.300 0.020 [7.62 0.51] 0.032 0.002 [0.81 0.05] FP003P 0.900 0.055 [22.86 1.40] 0.300 0.020 [7.62 0.51] 0.032 0.002 [0.81 0.05] FP069P 0.516 0.021 [13.11 0.53] 0.225 0.012 [5.72 0.31] 0.032 0.002 [0.81 0.05] % OF RATED POWER A 120 + 70 C 100 80 60 FP001P, FP002P, FP003P 40 20 FP1/2P 0 0 50 100 150 200 250 300 AMBIENT TEMPERATURE C % OF RATED POWER DERATING 120 + 25 C 100 3W 80 2W 60 40 20 0.6 W FP069P 0 0 50 100 150 200 250 300 AMBIENT TEMPERATURE C DERATING Document Number: 31030 Revision: 23-Jul-07 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 105 FP..P Vishay Dale Metal Film Resistors, Pulse Withstanding Protective LIGHTNING PULSE WAVE FORMS Lightning pulse wave forms are defined by three numbers: * Maximum time to reach peak voltage level (typically 10 s). * Minimum time for voltage to decrease to half value. * The peak voltage level. VOLTS Three examples are shown below. 1600 1200 800 400 0 200 VOLTS 10 by 160 to 1500 V 600 1000 s FCC - Longitudinal Surge 1600 1200 800 400 0 200 VOLTS 10 by 560 to 800 V 600 1000 s FCC - Metallic Surge 1600 1200 800 400 0 200 10 by 1000 to 1000 V www.vishay.com 106 600 1000 s REA - Current Surge For technical questions, contact: ff2aresistors@vishay.com Document Number: 31030 Revision: 23-Jul-07 FP..P Metal Film Resistors, Pulse Withstanding Protective Vishay Dale VOLTS These graphs show the relationship value and pulse withstanding voltage for FP1/2P thru FP003P using a 1.0 % resistance shift after 10 pulses as the figure of merit. The stable operating region of each package is on the right side of the appropriate line. 1750 FP003P FP002P FP069P FP001P 1500 1250 1000 750 500 250 0 FP1/2P (1500 at 2 k) 100 300 500 10 x 160 s VOLTS 700 900 RESISTANCE () 1750 FP003P FP002P FP069P FP001P 1500 1250 FP1/2P 1000 750 500 250 0 100 300 500 900 RESISTANCE () 10 x 560 s VOLTS 700 1750 FP002P 1500 FP003P FP069P 1250 FP001P FP1/2P 1000 750 500 250 0 100 10 x 1000 s Document Number: 31030 Revision: 23-Jul-07 300 500 700 900 RESISTANCE () For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 107 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1