COMPUTING Data Sheet High density, cost-effective 10G switch blade design for AdvancedTCA(R) platforms PICMG(R) 3.0 compliant base interface switch PICMG 3.1, Option 1, 9 fabric interface switch (1G/10G) Single AMC site Optional SATA HDD or SSD Optional Telecom clocking support Integrated software package Designed for NEBS/ETSI compliance ATCA-F125 10G AdvancedTCA Switch Blade The ATCA-F125 from Artesyn Embedded Technologies is a high density, cost-effective 10G switch blade providing the networking infrastructure for Artesyn Centellis(R) 4410 platforms. This product is ideal for creating network edge telecom applications with cost sensitive moderate bandwidth requirements. Combining several ATCA(R) functions within a single blade design optimizes slot usage helping end users to reach best Centellis 4410 platform price/performance ratio values. Optional functions include telecom clock generation and distribution, SATA based drive devices (HDD or SSD) and an AdvancedMCTM (AMC) site for general processing and/or packet processing functions. Different configuration options allow for maximum external I/O via 1G and 10G Ethernet interfaces at the front panel and/or at the optional Rear Transition Module. A powerful on-board service processor executes all L2 and L3 switch functions, blade setup and hardware platform management functions independent of any processor AMC and/or SATA drive installed. This allows full, 100% utilization of the AMC based processor for end-user applications. ATCA-F125 Data Sheet Hardware SERVICE PROCESSOR NXP(R) QorIQ(R) P2020, dual-core processor, 1.0 GHz MEMORY Up to 4GB ECC-protected SDRAM, via (2) DDR3 memory DIMMs * Factory default - 2GB 64MB boot flash (NOR), dual-bank architecture Base interface * 2x 10G Ethernet, SFPP Fabric interface * 2x 10G Ethernet, SFPP Telecom clock interfaces * 5x Inter-shelf interfaces, RJ-45 * 1x Master/Slave interface, RJ-45 2x BITS/SSU interfaces, RJ-45 2GB application flash (NAND), via eUSB REAR TRANSITION MODULE (RTM) 16MB CPU reset-persistent memory RTM-ATCA-F125 Base interface COUNTERS/TIMERS Four (4) 32-bit programmable timer/counters Watchdog timer BASE AND FABRIC INTERFACES Dual star configuration PICMG 3.0 base interface switching - Gigabit Ethernet (1.0Gbps) * 2x 10G Ethernet, SFPP * 4x 1G Ethernet, SFP Fabric interface * 6x 10G Ethernet, SFPP BLADE DIMENSIONS 8U form factor, 280 mm x 322.5 mm, single slot PICMG 3.1, Option 1, 9 fabric interface - Gigabit Ethernet (1.0Gbps, 10Gbps) RELEVANT STANDARDS AMC SITE PICMG 3.1, Options 1 and 9 Single AMC slot Telcordia GR-1244-CORE [5] (if equipped with Telecom Clock function) Mid-size AMC (AMC.0, AMC.1, AMC.2 and AMC.3 compliant) STORAGE BAY Single hard drive device (HDD) bay Direct mount installation Standard SATA interface * * Default configuration - P2020 service processor via SATA bridge Optional configuration - connection to AMC, port 2 PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) ANSI T1.101 [9] (if equipped with Telecom Clock function) POWER CHARACTERISTICS Dual redundant -48V rails Input range: -40 VDC to -72 VDC Power draw (typical) * ATCA-F125-14S: 80 watts * RTM-ATCA-F125: 20 watts FRONT PANEL INTERFACES OPERATING ENVIRONMENT Service processor Operating temperature range: -5 C to +55 C @ 90% non-condensing humidity * 1G Ethernet, RJ-45 * RS-232 serial, RJ-45 * USB 2.0 Storage temperature range: -40 C to +70 C @ 95% relative humidity ATCA-F125 Data Sheet Telecom Clock Characteristics (if equipped) TELECOM CLOCK CHIP SRstackware(R) Software Linux-based L2 and L3 switch management software providing a rich selection of features and protocols, e.g. * STP/RSTP/MSTP * VLAN, VLAN stacking (Q-in-Q) * LACP * Flow Control * Class of Service * GARP/GMRP/GVRP * SNMPv2, SNMPv3 * ACL Traditional signal-based reference as defined by Telcordia GR-1244-CORE [5] * IGMP v1/v2/v3, IGMP snooping/proxy * RIPv2, RIPng PERFORMANCE * OSPFv2 * VRRP Semtech Topsync ACS9510 SUPPORTED CONFIGURATIONS Input: BITS/SSU / Output: Backplane CLK 1/2 Input: Backplane CLK 3 / Output: Backplane CLK 1/2 Input: Backplane CLK 3 / Output: BITS/SSU TIMING REFERENCE Stratum 3 Multi-shelf capable Service Availability ForumTM Hardware Platform Interface (HPI) support Regulatory Compliance Designed to comply with NEBS Telcordia GR-63-CORE, NEBS Physical Protection, Level 3 Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety -- Generic Criteria for Network Telecommunications Equipment. Level 3, Equipment Type 2 Designed to comply with ETSI ETSI Storage, ETS 300 019-2-1, Class 1.2 equipment, Weatherprotected, not Temperature Controlled Storage Locations ETSI Transportation, ETS 300 019-1-2, Class 2.3 equipment, Public Transportation ETSI Operation, ETS 300 019-1-3, Class 3.1(E) equipment, Partly Temperature Controlled Locations ETSI EN 300-132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) ETS-300-753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment EMC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) FCC 47 CFR Part 15 Subpart B (US), Class A ECISPR 22, Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment Industry Canada ICES-003 Class A Safety Compliance to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme. Marked with U.S. NRTL, Canadian Safety and CE Mark. RoHS compliance DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment Directive 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. CE Conformity Directive 2004/108/EC, Directive 2006/95/EC ATCA-F125 Data Sheet Ordering Information Part Number Description Switch Blade Products ATCA-F125-14S 10G ATCA hub blade, one AMC slot, and optional storage ATCA-F125-TCLK3 10G ATCA hub blade, one AMC slot, optional storage, telecom clock Stratum 3 Optional Switch Blade Products RTM-ATCA-F125 RTM for the ATCA-F125 with SFP & SFPP receptacles SFP-MM-SX-LC 1G single form factor (SFP) module - 850NM, SX, LC connector SFP-CO-RJ-45 1G copper single form factor (SFP) module - RJ-45 connector SFPP-MM-SR-LC 10G single form factor plus (SFPP) module - 850NM, SR, LC connector SFPP-SM-LR-LC 10G single form factor plus (SFPP) module - 1310NM, LR, LC connector SFPP-CO-RJ-45-3M 10G copper single form factor plus (SFPP) modules with molded cable (3M) CABLE-OPT-F102-5M Optical cable for multi-mode, SFP and SFPP connections (5M) PRAMC-7311 AMC with Intel(R) CoreTM i7 processor, 4GB DDR3, mid-size SW-WR-PRAMC-7311 CD with Wind River PNE 3.0 and Basic Blade Services for the PrAMC-7311, single blade license PRAMC-7311-16GB AMC with Intel(R) CoreTM i7 processor, 16GB DDR3, mid-size HDD-1T-SATA Direct mount 1000 GB HDD for ATCA-F125 & ATCA-F140, Enhanced Availability - SATA SSD-480G-SATA-F140-1 480GB MLC Solid State Disk with mounting kit SSD-960G-SATA-F140-1 960GB MLC 2.5 inch SSD with mounting kit for ATCA-F125 and ATCA-F140 SOLUTION SERVICES Artesyn Embedded Technologies provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. WORLDWIDE OFFICES United States Hong Kong China +1 888 412 7832 +852 2176 3540 +86 400 8888 183 Japan Korea +81 3 5403 2730 +82 2 6004 3268 AArtesyn Embedded Technologies, Artesyn, the Artesyn Embedded Technologies logo and Centellis are trademarks and service marks of Artesyn Embedded Technologies, Inc. Centellis(R) is registered in one or more countries. PICMG, AdvancedMC, AdvancedTCA, ATCA and the AdvancedTCA logo are trademarks of PICMG. Service Availability is a proprietary trademark used under license. Intel, Core and Xeon are trademarks of Intel Corporation or its subsidiaries in the Unites States and other countries. NXP and QorIQ are trademarks of NXP B.V. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com ATCA-F125-DS 27Nov2017