Multilayer Ceramic Capacitors Approval Sheet MULTILAYER CERAMIC CAPACITORS Soft Termination Series (SH_6.3V to 100V) NP0, X7R, X5R & Y5V Dielectrics 0402 to 1812 Sizes, 6.3V to 100V Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 1. INTRODUCTION WTC soft termination series MLCC is designed and with a polymer layer within end terminations of product, which can absorb mechanical stress caused by PCB handling in SMT line and reduce the mechanical impact for product. It will offer more robust and reliable performance in applications. 2. FEATURES 3. APPLICATIONS a. MLCC's termination are with a soft & flexible polymer layer to withstand high bending stress in SMT line. b. Available for any item in standard series range. a. b. c. d. Automotive industry. Power supply and related industries. Lighting industry. The other mechanical stress concerned products. 4. HOW TO ORDER SH 31 B 104 K 500 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging Two significant digits followed by no. of zeros. And R is in place of decimal point. Eg. 104=10x104 =100nF B=0.1pF C=0.25pF D=0.5pF F=1% G=2% J=5% K=10% M=20% Z=-20/+80% SH=Soft termination 15=0402 (1005) 18=0603 (1608) 21=0805 (2012) 31=1206 (3216) 32=1210 (3225) 43=1812 (4532) N=NP0 (C0G) B=X7R X=X5R F=Y5V Two significant C=Ag Polymer T=7" reeled digits followed by /Ni/Sn G=13" reeled no. of zeros. And R is in place of decimal point. 6R3=6.3 VDC 100=10 VDC 160=16 VDC 250=25 VDC 500=50 VDC 101=100 VDC Note 1: Please see below product range to find right termination code. Page 2 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 5. EXTERNAL DIMENSIONS & CONSTRUCTIONS Size Inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) L (mm) W (mm) T (mm)/Symbol Remark MB (mm) # 0.25 +0.05/-0.10 1.000.20 0.500.20 0.500.20 E 1.600.20 0.800.10 0.800.07 S 1.600.30 0.800.30 0.800.30 0.600.10 0.800.10 1.250.10 1.250.30 0.800.10 X A B D I B 0.950.10 1.150.15 C J # # 1.250.10 D # 2.000.20 1.250.10 2.000.30 1.250.30 3.20+0.4/-0.1 1.600.15 1206 (3216) W # # 1.600.20 1.600.20 G # 3.200.50 1.600.50 1.600.50 P # 0.950.10 C # 1.250.10 1.600.20 2.000.20 2.500.50 1.250.10 D G K M D # # # # # 3.200.30 1.600.20 2.000.20 G K # # 3.200.40 # Reflow soldering only is recommended. 2.500.50 M # 2.500.20 3.200.60 2.500.50 1210 (3225) 1812 (4532) 4.50+0.6/-0.4 T 0.400.15 3.20+0.4/-0.1 3.200.40 L MB 0.500.20 MB Fig. 1 The outline of MLCC 0.600.20 0.750.25 0.750.25 6. GENERAL ELECTRICAL DATA Dielectric NP0 Size Capacitance range* Capacitance tolerance** 0.1pF to 0.039F Cap5pF: B (0.1pF), C (0.25pF) 5pF<Cap<10pF: C (0.25pF), D (0.5pF) Cap10pF: F (1%), G (2%), J (5%), K (10%) 100pF to 47F -55 to +125C 30ppm -55 to +125C Rated voltage (WVDC) Operating temperature Capacitance characteristic Termination X7R X5R Y5V 0402, 0603, 0805, 1206, 1210, 1812 0.027F to 10F K (10%), M (20%) 0.01F to 4.7F Z (-20/+80%) 6.3V, 10V, 16V, 25V, 50V, 100V 15% -55 to +85C 15% -25 to +85 C +30/-80% Ni/Sn (lead-free termination) * Measured at the condition of 30~70% related humidity. NP0: Apply 1.00.2Vrms, 1.0MHz10% for Cap1000pF and 1.00.2Vrms, 1.0kHz10% for Cap>1000pF, 25C at ambient temperature X7R, X5R: Apply 1.00.2Vrms, 1.0kHz10%, at 25C am bient temperature. Y5V: Apply 1.00.2Vrms, 1.0kHz10%, at 20C ambient temperature. ** Preconditioning for Class II MLCC: Perform a heat treatment at 15010C for 1 hour, then leave in a mbient condition for 242 hours before measurement. Page 3 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 7. CAPACITANCE RANGE (NP0 Dielectric ) 0402, 0603, 0805 Sizes Capacitance DIELECTRIC SIZE 0402 RATED VOLTAGE 10 16 25 50 100 10 0.1pF (0R1) E E E E 0.2pF (0R2) E E E E 0.3pF (0R3) E E E E 0.4pF (0R4) E E E E 0.5pF (0R5) E E E E E S 0.6pF (0R6) E E E E E S 0.7pF (0R7) E E E E E S 0.8pF (0R8) E E E E E S 0.9pF (0R9) E E E E E S 1.0pF (1R0) E E E E E S 1.2pF (1R2) E E E E E S 1.5pF (1R5) E E E E E S 1.8pF (1R8) E E E E E S 2.2pF (2R2) E E E E E S 2.7pF (2R7) E E E E E S 3.3pF (3R3) E E E E E S 3.9pF (3R9) E E E E E S 4.7pF (4R7) E E E E E S 5.6pF (5R6) E E E E E S 6.8pF (6R8) E E E E E S 8.2pF (8R2) E E E E E S 10pF (100) E E E E E S 12pF (120) E E E E E S 15pF (150) E E E E E S 18pF (180) E E E E E S 22pF (220) E E E E E S 27pF (270) E E E E E S 33pF (330) E E E E E S 39pF (390) E E E E E S 47pF (470) E E E E E S 56pF (560) E E E E E S 68pF (680) E E E E E S 82pF (820) E E E E E S 100pF (101) E E E E E S 120pF (121) E E E E E S 150pF (151) E E E E E S 180pF (181) E E E E E S 220pF (221) E E E E E S 270pF (271) E E E E S 330pF (331) E E E E S 390pF (391) E E E E S 470pF (471) E E E E S 560pF (561) E E E E S 680pF (681) E E E E S 820pF (821) E E E E S 1,000pF (102) E E E E S 1,200pF (122) X 1,500pF (152) X 1,800pF (182) X 2,200pF (222) X 2,700pF (272) X 3,300pF (332) X 3,900pF (392) 4,700pF (472) 5,600pF (562) 6,800pF (682) 8,200pF (822) 0.010uF (103) 0.012uF (123) 1. The letter in cell is expressed the symbol of product thickness. 16 NP0 0603 25 50 100 10 16 0805 25 50 100 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B D D D D D D D D A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B D D D D D D D D A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B D D D D D D D D A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B D D D D D D D D A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B D D D D D D 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 4 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 1206, 1210, 1812 Sizes Capacitance DIELECTRIC SIZE 1206 RATED VOLTAGE 10 16 25 50 100 10 1.0pF (1R0) 1.2pF (1R2) B B B B B 1.5pF (1R5) B B B B B 1.8pF (1R8) B B B B B 2.2pF (2R2) B B B B B 2.7pF (2R7) B B B B B 3.3pF (3R3) B B B B B 3.9pF (3R9) B B B B B 4.7pF (4R7) B B B B B 5.6pF (5R6) B B B B B 6.8pF (6R8) B B B B B 8.2pF (8R2) B B B B B 10pF (100) B B B B B C 12pF (120) B B B B B C 15pF (150) B B B B B C 18pF (180) B B B B B C 22pF (220) B B B B B C 27pF (270) B B B B B C 33pF (330) B B B B B C 39pF (390) B B B B B C 47pF (470) B B B B B C 56pF (560) B B B B B C 68pF (680) B B B B B C 82pF (820) B B B B B C 100pF (101) B B B B B C 120pF (121) B B B B B C 150pF (151) B B B B B C 180pF (181) B B B B B C 220pF (221) B B B B B C 270pF (271) B B B B B C 330pF (331) B B B B B C 390pF (391) B B B B B C 470pF (471) B B B B B C 560pF (561) B B B B B C 680pF (681) B B B B B C 820pF (821) B B B B B C 1,000pF (102) B B B B B C 1,200pF (122) B B B B B C 1,500pF (152) B B B B B C 1,800pF (182) B B B B B C 2,200pF (222) B B B B B C 2,700pF (272) B B B B B C 3,300pF (332) B B B B B C 3,900pF (392) B B B B B C 4,700pF (472) B B B B B C 5,600pF (562) B B B B B C 6,800pF (682) C C C C C C 8,200pF (822) D D D D D C 0.010F (103) D D D D D C 0.012F (123) P P P P P D 0.015F (153) P P P P P D 0.018F (183) P P P P P 0.022F (223) P P P P P 0.027F (273) P P P P 0.033F (333) P P P P 0.039F (393) P P P P 1. The letter in cell is expressed the symbol of product thickness. 16 NP0 1210 25 50 100 10 16 1812 25 50 100 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 5 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 7-1. CAPACITANCE RANGE (X7R Dielectric) 0402, 0603, 0805 Sizes Capacitance DIELECTRIC SIZE RATED VOLTAGE 100pF (101) 120pF (121) 150pF (151) 180pF (181) 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) 560pF (561) 680pF (681) 820pF (821) 1,000pF (102) 1,200pF (122) 1,500pF (152) 1,800pF (182) 2,200pF (222) 2,700pF (272) 3,300pF (332) 3,900pF (392) 4,700pF (472) 5,600pF (562) 6,800pF (682) 8,200pF (822) 0.010F (103) 0.012F (123) 0.015F (153) 0.018F (183) 0.022F (223) 0.027F (273) 0.033F (333) 0.039F (393) 0.047F (473) 0.056F (563) 0.068F (683) 0.082F (823) 0.10F (104) 0.12F (124) 0.15F (154) 0.18F (184) 0.22F (224) 0.27F (274) 0.33F (334) 0.39F (394) 0.47F (474) 0.56F (564) 0.68F (684) 0.82F (824) 1.0F (105) 1.5F (155) 2.2F (225) 4.7F (475) 10 E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E 16 E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E 0402 25 E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E 50 E E E E E E E E E E E E E E E E E E E E E E E E E 100 E E E E E E E E E E E E E E E E E E E E E 10 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X 16 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X X7R 0603 25 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X X 50 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X 100 S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X X X X X 10 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I I I 16 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I I I I 0805 25 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I I I I I I I 50 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I I I 100 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D I I 1. The letter in cell is expressed the symbol of product thickness. 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 6 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 1206, 1210, 1812 Sizes Capacitance DIELECTRIC SIZE 1206 RATED VOLTAGE 10 16 25 50 100 6.3 100pF (101) 120pF (121) 150pF (151) D D D D D 180pF (181) D D D D D 220pF (221) D D D D D 270pF (271) D D D D D 330pF (331) D D D D D 390pF (391) D D D D D 470pF (471) D D D D D 560pF (561) D D D D D 680pF (681) D D D D D 820pF (821) D D D D D 1,000pF (102) D D D D D 1,200pF (122) D D D D D 1,500pF (152) D D D D D 1,800pF (182) D D D D D 2,200pF (222) D D D D D 2,700pF (272) D D D D D 3,300pF (332) D D D D D 3,900pF (392) D D D D D 4,700pF (472) D D D D D 5,600pF (562) D D D D D 6,800pF (682) D D D D D 8,200pF (822) D D D D D 0.010F (103) D D D D D 0.012F (123) D D D D D 0.015F (153) D D D D D 0.018F (183) D D D D D 0.022F (223) D D D D D 0.027F (273) D D D D D 0.033F (333) D D D D D 0.039F (393) D D D D D 0.047F (473) D D D D D 0.056F (563) D D D D D 0.068F (683) D D D D D 0.082F (823) D D D D D 0.10F (104) D D D D D 0.12F (124) D D D D D 0.15F (154) C C C C G 0.18F (184) C C C C G 0.22F (224) C C C C G 0.27F (274) C C C D G 0.33F (334) C C C D G 0.39F (394) C C J P G 0.47F (474) J J J P G 0.56F (564) J J J P P 0.68F (684) J J J P P 0.82F (824) J J J P P 1.0F (105) J J J P P 1.5F (155) J J P 2.2F (225) J J P P 3.3F (335) P P P 4.7F (475) P P P 10F (106) P P P 22F (226) P 47F (476) M 1. The letter in cell is expressed the symbol of product thickness. 10 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D K K X7R 1210 16 25 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D K K K K K M C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D G G G K M 50 100 10 16 1812 25 50 100 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D M M M M M C C C C C C C C C C C C C C C C C C C C C C C C C C D D D G G M M M K K K M M D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D K K K D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K K M M 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 7 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 7-2. CAPACITANCE RANGE (X5R Dielectric) Dielectric Size Rated Voltage (VDC) 6.3 0.027F (273) 0.033F (333) 0.039F (393) 0.047F (473) 0.056F (563) 0.068F (683) 0.082F (823) E 0.10F (104) E 0.15F (154) E 0.22F (224) E 0.27uF (274) 0.33F (334) E 0.39F (394) 0.47F (474) E 0.68F (684) E 0.82uF (824) 1.0F (105) 1.5F (155) 2.2F (225) 3.3F (335) 4.7F (475) 6.8uF (685) 10F (106) 22F (226) Capacitance 0402 10 16 E E E E E E E E E E E E E E E E 25 X5R 0603 0805 1206 1210 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 E E E E X E E X X X X X X X X X X X X X X X X X X X X X X X X X X X X X I I I X D I I I D I I I D I I I P P P J J P P P P J J P P P P P P K K K K K K K K K K 1. The letter in cell is expressed the symbol of product thickness. 2. For more information about products with special capacitance or other data, please contact WTC local representative. 7-3. CAPACITANCE RANGE (Y5V Dielectric) Capacitance DIELECTRIC SIZE RATED VOLTAGE 0.010F (103) 0.015F (153) 0.022F (223) 0.033F (333) 0.047F (473) 0.068F (683) 0.10F (104) 0.15F (154) 0.22F (224) 0.33F (334) 0.47F (474) 0.68F (684) 1.0F (105) 2.2F (225) 4.7F (475) Y5V 6.3 E E 10 E E E E E E E E E E 0402 16 E E E E E E E E E E 0603 25 E E E E E E E 50 E E E E 10 S S S S S S S S S S S S S S X 16 S S S S S S S S S S S X X X 25 S S S S S S S S S S X 50 S S S S S S S S S X X 1. The letter in cell is expressed the symbol of product thickness. 2. For more information about products with special capacitance or other data, please contact WTC local representative. Page 8 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 8. PACKAGING STYLE AND QUANTITY Paper tape Size 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) Plastic tape Thickness (mm)/Symbol 0.500.20 0.800.07 0.800.30 0.600.10 0.800.10 1.250.10 1.250.30 0.800.10 0.950.10 1.150.15 1.250.10 1.600.20 1.600.50 0.950.10 1.250.10 1.600.20 2.000.20 2.500.50 1.250.10 1.600.20 2.000.20 2.500.50 E S X A B D I B C J D G P C D G K M D G K M 7" reel 13" reel 7" reel 13" reel 10k 4k 4k 4k 4k 4k - 15k 15k 15k 15k 15k - 3k 3k 3k 3k 3k 2k 2k 3k 3k 2k 1k 1k 1k 1k 1k 0.5k 10k 10k 10k 10k 10k 10k 9k 10k 10k 6k 6k 5k 3k Unit: pieces Page 9 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet 9. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. Item Test Condition Requirements 1. Visual and Mechanical --- * No remarkable defect. * Dimensions to conform to individual specification sheet. 2. 3. Capacitance Class I: (NP0) 1000pF, 1.00.2Vrms1MHz10% 1000pF, 1.00.2Vrms1KHz10% Class II: (X7R, X7E, X6S, X5R,X7S,Y5V) C10F, 1.00.2Vrms1KHz10% ** C10F, 0.50.2Vrms120Hz20% * Shall not exceed the limits given in the detailed spec. Q/ D.F. (Dissipation Factor) NP0: Cap30pF, Q1000; Cap<30pF,Q400+20C X7R,X5R,X6S,X7S: Rated D.F. Exception of D.F. vol. 3% 12060.47F 100V 2.5% 5% 08050.1F;06030.068F;1206>1F;12102.2F;TT series 10% 08050.22F;12103.3F ** Test condition: 0.50.2Vrms1KHz10% 3% 0201(50V);06030.047F;08050.18F;12060.47F 5% 02010.01uF;12104.7F X7R: 50V 2.5% 04020.012F;0603>0.1F;08051F;12062.2F; 0805=106(6.3V), 0603/475(6.3V) 10% 121010F;TT series X5R: #1 35V 3.5% 10% 06031F;08052.2F;12062.2F;121010F 0201 224 (6.3V,10V,16V) , 5% 02010.01F;08051F;121010F 0402 475 (6.3V,16V), 0402 225(10V), 7% 06030.33F 0603=106 (6.3V,10V), 25V 3.5% 02010.1F;04020.10F&(0402/X7R0.056F);TT series TT18X 475(10V) , TT15X series 10% 06030.47F;08052.2F;12064.7F;121022F X6S: 12.5% 04020.47F #1 0201/474(4V),0201104 (6.3V,10V ), 02010.01F;04020.033F;06030.15F; 5% 0402 225 (6.3V), 08050.68F;12062.2F;12104.7F 16V 3.5% 0402/475 (10V), 0603/106 (6.3V), 02010.1uF(0201/X7R0.022F);04020.22uF;TT series 10% 06030.68F;08052.2F;12064.7F;121022F X7S: 02010.012F;04020.33F(0402/X7R0.22F);TT series 0402/225(6.3V) 10% 06030.33F;08052.2F;12062.2F;121022F;01R5 10V 5% 15% 02010.1F; 04021F #1 Excluding 02010.1F;04021F(0402/X6S0.47F);060310F;0805 15% X5R/0201/105(6.3V);225(10V), 120647F;1210100F;TT series 6.3V 10% X6S/0201/104(10V) 20% 04022.2F (1.00.2Vrms1KHz10%) 4V 15% ----Y5V: *Before initial measurement (Class II only): Rated vol. D.F. Exception of D.F. To apply de-aging at 150C for 1hr then set 06030.1F; 08050.47F; 12064.7F; TT series 7% 50V 5% for 242 hrs at room temp. 12.5% 12106.8F --04020.047F;06030.1F; 08050.33F; 12061F; 12104.7F 25V 5% 04020.068F;06030.47F; 12064.7F; 9% 121022F; TT series 04020.068F; 06030.68F 9% 16V 7% (C<1.0F) 12.5% 04020.22F 06032.2F; 08053.3F;120610F; 16V 9% 12.5% 121022F; 181247F; TT series (C1.0F) 10V 12.5% 20% 04020.47F --6.3V 20% --35V 7% --- 7% 4. 5. Strength * To apply voltage (100V) 250%. * Duration: 1 to 5 sec. * Charge and discharge current less than 50mA. Insulation To apply rated voltage for MAX. 120sec. Dielectric Resistance Page 10 of 17 * No evidence of damage or flash over during test. 10G or RxC500-F whichever is smaller. Class II (X7R, X7E, X5R,X6S,X7S,Y5V:) *Before initial measurement (Class II only): Rated voltage To apply de-aging at 150C for 1hr then set 100V: All X7R for 242 hrs at room temp. 50V:0402>0.01F;06031F;08051F;12064.7F;12104.7F 35V:08052.2F;12062.2F;121010F 25V:04021F;06032.2F;08052.2F;120610F;121010F 16V: 02010.1F,04020.22F;06031F; 08052.2F;120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V ; TT series; Size1812 Insulation Resistance 10G or RxC 100 -F whichever is smaller. Rated voltage Insulation Resistance All X6S items, All X7S items 100V: 12103.3F 50V: 04020.1F; 06032.2F; 080510F;120610F 35V: 06031F; 25V: 02010.1F; 04022.2F;060310F; 080510F;120622F 16V: 060310F; 04021F; 02010.22F 10V: 0201>0.1F; 04021F; 060310F; 080547F; TT21>4.7F 6.3V: 02010.1F; 0603>4.7F; 080547F;120610F; TT15>1.0F 4V:060322F; 080547F; 1206100F RxC50 -F. ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors No. 6. Item Temperature Coefficient Approval Sheet Test Condition With no electrical load. T.C. Operating Temp NPO -55~125C at 25C X7R -55~125C at 25C X7S -55 ~ 125C at 25C X5R -55~ 85C at 25C X6S -55~105C at 25C Y5V -25~ 85C at 20C *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 24 2 hrs at room temp. 01005 Cap0.01F: 0.5V Cap>0.01F: 0.2V Requirements T.C. Capacitance Change NPO Within 30ppm/C X7R Within 15% X7S Within 22% X5R Within 15% X6S Within 22% Y5V Within +30%/-80% 0201 Cap<0.1F:1V 0.1F*Cap<1F: 0.2V Cap1F: 0.1V *0201X104/16V: 0.5V 0603 Cap1F: 1V 1F<Cap4.7F: 0.5V Cap>4.7F: 0.2V 0402 Cap<1F: 1V Cap=1F: 0.5V 1F<Cap<10F: 0.2V Cap10F: 0.1V 0805 1206/1210 Cap<10F: 1V Cap10F: 1V Cap=10F: 0.5V 10F<Cap100F: 0.5V Cap>10F: 0.2V Cap>100F: 0.2V * Measurement voltage for Class II: 7. * Pressurizing force * No remarkable damage or removal of the terminations. 2N (0201) and 5N (0603) and 10N (>0603) * Test time: 101 sec. Vibration Resistance * Vibration frequency: 10~55 Hz/min. * No remarkable damage. * Total amplitude: 1.5mm * Cap change and Q/D.F.: To meet initial spec. * Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 24 2 hrs at room temp. *Cap./DF(Q) Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. Adhesive Strength of Termination 8. 9. Solderability * Solder temperature: 2355C 75% min. coverage of all metalized area. * Dipping time: 20.5 sec. 10. Bending Test 11. Resistance to Soldering Heat 12. Temperature Cycle Page 11 of 17 * The middle part of substrate shall be pressurized by * No remarkable damage. means of the pressurizing rod at a rate of about 1 mm per * Cap change second until the deflection becomes 5 mm and then the NP0: within 5% or 0.5pF whichever is larger pressure shall be maintained for 51 sec. X7R, X5R, X6S, X7S: within 12.5% *Before initial measurement (Class II only): Y5V: within 30% To apply de-aging at 150C for 1hr then set for 24 2 hrs (This capacitance change means the change of capacitance under at room temp. specified flexure of substrate from the capacitance measured before * Measurement to be made after keeping at room temp. the test.) for 242 hrs. * Solder temperature: 2605C * No remarkable damage. * Dipping time: 101 sec * Cap change: * Preheating: 120 to 150C for 1 minute before imme rse NP0: within 2.5% or 0.25pF whichever is larger the capacitor in a eutectic solder. X7R, X5R, X6S, X7S: within 7.5% *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room Y5V: within 20% temp. * Q/D.F., I.R. and dielectric strength: To meet initial requirements. *Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room * 25% max. leaching on each edge. temp. * Conduct the five cycles according to the temperatures * No remarkable damage. and time. * Cap change Step Temp. (C) Time (min.) NP0: within 2.5% or 0.25pF whichever is larger 1 Min. operating temp. +0/-3 303 X7R, X5R, X6S, X7S: within 7.5% 2 Room temp. 2~3 Y5V: within 20% 3 Max. operating temp. +3/-0 303 * Q/D.F., I.R. and dielectric strength: To meet initial requirements. 4 Room temp. 2~3 *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors No. 13. Item Humidity (Damp Heat) Steady State Approval Sheet Test Condition Requirements *Test temp.: 402C * No remarkable damage. *Humidity: 90~95%RH * Cap change: *Test time: 500+24/-0hrs. NP0: within 5% or 0.5pF whichever is larger X7R, X5R, X6S, X7S: 10V**,within 12.5%; 6.3V within 25%; *Before initial measurement (Class II TT series & C 1uF,within 25% only): To apply de-aging at 150C for **10V: 06034.7F;04021F;02010.1F, within 25%; 1hr then set for 242 hrs at room temp. Y5V: 10V, within 30%; 6.3V, within +30/-40% * Cap. / DF(Q) / I.R. Measurement to be * Q/D.F. value: made after de-aging at 150C for 1hr NP0: More than 30pF Q350, 10pFC30pF, Q275+2.5C then set for 242 hrs at room temp. Less than 10pF Q200+10C X7R, X5R, X6S, X7S: Rated vol. D.F. Exception of D.F. 6% 12060.47F 7.5% 08050.1F, 06030.068F, 1206>1F;12102.2F;TT series 20% 08050.22F;1210 3.3F 6% 0201(50V);06030.047F; 08050.18F; 12060.47F 3% 10% 0201 0.01uF;12104.7F 20% 04020.012F; 0603>0.1F; 08051F; 12062.2F; 121010F; TT series 5% 20% 06031F;08052.2F;1206 2.2F;121010F 10% 02010.01F;08051F; 121010F 14% 06030.33F 5% 0201 0.1F;04020.10F&(0402/X7R0.056F); TT series 15% ;06030.47F;08052.2F;12064.7F;121022F 20% 0402 0.47F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5% 15% 02010.01F(0201/X7R 0.022F);04020.033F; 06030.68F;08052.2F;12064.7F; 121022F; TT series 15% 02010.012F; 04020.33F(0402/X7R0.22F); 06030.33F;08052.2F;12062.2F; 121022F 7.5% 20% 02010.1F ;04021F; TT series; 01R5 15% 30% 02010.1F;04021F(0402/X6S0.47F);060310F; 08054.7F;120647F;1210100F;TT series 20% ----- 100V3% 50V 35V 25V 16V 10V 6.3V 4V Y5V: Rated vol. D.F. Exception of D.F. 06030.1F; 08050.47F; 12064.7F 50V 7.5% 20% 12106.8F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 12104.7F 25V 7.5% 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5%04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 16V 06032.2F; 08053.3F; 12.5%20% (C1.0F) 120610F;121022F; 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----10% *I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Rated voltage Insulation Resistance 100V: All X7R;12103.3F 50V: 0402>0.01F;06031F;08051F;12064.7F;12104.7F 35V:06031F;08052.2F; 12062.2F;121010F 25V:02010.1uF; 04020.22F; 06032.2F;08052.2F; 120610F;121010F 16V: 02010.1uF;04020.22F;06031F;08052.2F; 120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V ; TT series ; All X6S/X7S items; Size1812 Page 12 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS 1G or RxC 10 -F whichever is smaller. Dec. 2018 Multilayer Ceramic Capacitors No 14 Item Humidity (Damp Heat) Load Approval Sheet Test Condition *Test temp.402C *Humidity90~95%RH *Test time500+24/-0 hrs. *To apply voltage Rated voltage (MAX. 500V) *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. Requirements * No remarkable damage. Cap change: NP0: 7.5% or 0.75pF whichever is larger. X7R, X5R, X6S, X7S: 10V**,within 12.5%; 6.3V within 25%; TT series & C 1uF,within 25% **10V: 06034.7F;04021F;02010.1F, within 25%; Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: C30pF,Q200;C<30pF, Q100+10/3C X7R, X5R, X6S, X7S: Rated vol. D.F. Exception of D.F. 6% 12060.47F 7.5% 08050.1F, 06030.068F, 1206>1F;12102.2F;TT series 20% 08050.22F;1210 3.3F 6% 0201(50V);06030.047F; 08050.18F; 12060.47F 3% 10% 0201 0.01uF;12104.7F 20% 04020.012F; 0603>0.1F; 08051F; 12062.2F; 121010F; TT series 5% 20% 06031F;08052.2F;1206 2.2F;121010F 10% 02010.01F;08051F; 121010F 14% 06030.33F 5% 15% 0201 0.1F;04020.10F&(0402/X7R0.056F); TT series ;06030.47F;08052.2F;12064.7F;121022F 20% 0402 0.47F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5% 15% 02010.01F(0201/X7R 0.022F);04020.033F; 06030.68F;08052.2F;12064.7F; 121022F; TT series 15% 02010.012F; 04020.33F(0402/X7R0.22F); 7.5% 06030.33F;08052.2F;12062.2F; 121022F 20% 02010.1F ;04021F; TT series; 01R5 15% 30% 02010.1F;04021F(0402/X6S0.47F);060310F; 08054.7F;120647F;1210100F;TT series 20% ----- 100V3% 50V 35V 25V 16V 10V 6.3V 4V Y5V: Rated vol. D.F. Exception of D.F. 10% 06030.1F; 08050.47F;12064.7F 50V 7.5% 20% 12106.8F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 12104.7F 25V 7.5% 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5%04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 16V 06032.2F; 08053.3F; 12.5%20% (C1.0F) 120610F;121022F; 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----- *I.R.: 10V, 500M or 25 -F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Rated voltage Insulation Resistance 100V: All X7R;12103.3F 50V: 0402>0.01F;06031F;08051F;12064.7F;12104.7F 35V:06031F;08052.2F; 12062.2F;121010F 25V:02010.1uF; 04020.22F; 06032.2F;08052.2F; 120610F;121010F 16V: 02010.1uF;04020.22F;06031F;08052.2F; 120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V ; TT series ; All X6S/X7S items; Size1812 Page 13 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS 500M or RxC5 -F whichever is smaller. Dec. 2018 Multilayer Ceramic Capacitors No 15. Item Approval Sheet Test Condition High Temperature *Test temp. Load NP0, X7R/X7E/X7S: 1253C (Endurance) X6S: 1053C X5R, Y5V: 853C *Test time: 1000+24/-0 hrs. *To apply voltage: (1) 6.3V or C10F or TT series: 150% of rated voltage. (2) 10VUr<500V: 200% of rated voltage. (3) 500V: 150% of rated voltage. (4) Ur630V: 120% of rated voltage. (5) 100% of rated voltage for below range. Rated Capacitance Size Dielectric voltage range 10V C0.1F 0201 X5R/X7R/X6S 16V C >0.1F 16V C >1.0F X5R 25V,50V C1.0F 6.3V C >1.0F 0402 X6S 10V~25V C1.0F X7R/X7S/Y5V 6.3V,10V C1.0F 4V C22F X5R/X7R/ 6.3V,10V C4.7F 0603 X6S/X7S 25V,35V C1.0F 4V C47F X5R/X7R/ 6.3V C22F 0805 X6S/X7S 10V~50V C10F C47F 1206 X5R/X7R/X6S 6.3V 16V C47F X5R/X7R/X6S 1210 100V C3.3F X7R TT15 X5R 6.3V C >1.0F 6.3V,10V C2.2F TT18 Y5V 6.3V C10F Y5V TT21 C10F X5R/X7R/X6S 10V 6.3V C22F TT31 Y5V **1WV items must follow de-rating conditions. (6) 150% of rated voltage for below range. Rated Capacitance Size Dielectric voltage range 16V,25V C=0.1F X5R/X6S 0201 16V C0.022F X7R 50V C0.1F X7R/X5R/ X6S 0402 10~25V C0.22F 16V C0.47F Y5V 50V~100V C>0.22F X7S 50V C>0.1F X7R 50V C1.0F X5R 0603 X5R/X7R/ 10V,16V, C1.0F X6S/X7S 16V C2.2F Y5V 100V C0.47F 50V C1.0F X5R/X7R/ X6S/X7S 35V C2.2F 0805 10~25V C4.7F 16V C4.7F Y5V 100V C>1.0F X5R/X7R/ 1206 X6S/X7S 50V C=4.7F X5R/X7R/ 50V~100V C2.2F 1210 X6S/X7S 1825 2220 100V~250V C1.0F X7R 2225 * Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. ** De-rating conditions: Page 14 of 17 Requirements * No remarkable damage. Cap change: NP0: 3.0% or 0.3pF whichever is larger X7R, X5R, X6S, X7S: 10V**,within 12.5%; 6.3V within 25%; TT series & C 1uF,within 25% **10V: 06034.7F;04021F;02010.1F, within 25%; Y5V: 10V, within 30%; 6.3V, within +30/-40% Q/D.F. value: NP0: More than 30pF, Q350 10pFC<30pF, Q275+2.5C Less than 10pF, Q200+10C X7R, X5R, X6S, X7S: Rated vol. D.F. Exception of D.F. 6% 12060.47F 7.5% 08050.1F, 06030.068F, 1206>1F;12102.2F;TT series 20% 08050.22F;1210 3.3F 6% 0201(50V);06030.047F; 08050.18F; 12060.47F 3% 10% 0201 0.01uF;12104.7F 20% 04020.012F; 0603>0.1F; 08051F; 12062.2F; 121010F; TT series 5% 20% 06031F;08052.2F;1206 2.2F;121010F 10% 02010.01F;08051F; 121010F 14% 06030.33F 5% 0201 0.1F;04020.10F&(0402/X7R0.056F); TT series 15% ;06030.47F;08052.2F;12064.7F;121022F 20% 0402 0.47F 10% 06030.15F;08050.68F;12062.2F;12104.7F 5% 15% 02010.01F(0201/X7R 0.022F);04020.033F; 06030.68F;08052.2F;12064.7F; 121022F; TT series 02010.012F; 04020.33F(0402/X7R0.22F); 15% 7.5% 06030.33F;08052.2F;12062.2F; 121022F 20% 02010.1F ;04021F; TT series; 01R5 15% 30% 02010.1F;04021F(0402/X6S0.47F);060310F; 08054.7F;120647F;1210100F;TT series 20% ----- 100V3% 50V 35V 25V 16V 10V 6.3V 4V Y5V: Rated vol. D.F. 50V 7.5% Exception of D.F. 10% 06030.1F; 08050.47F;12064.7F 20% 12106.8F 35V 10% ----04020.047F;06030.1F; 10% 08050.33F;12061F; 12104.7F 25V 7.5% 04020.068F;06030.47F; 15% 12064.7F; 121022F 12.5%04020.068F; 06030.68F 16V 10% (C<1.0F) 20% 04020.22F 16V 06032.2F; 08053.3F; 12.5%20% (C1.0F) 120610F;121022F; 181247F; 10V 20% 30% 04020.47F 6.3V 30% ----*I.R.: 10V, 1G or 50 -F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Insulation Resistance Rated voltage 100V: All X7R;12103.3F 50V: 0402>0.01F;06031F;08051F;12064.7F;12104.7F 35V:06031F;08052.2F; 12062.2F;121010F 25V:02010.1uF; 04020.22F; 06032.2F;08052.2F; 120610F;121010F 16V: 02010.1uF;04020.22F;06031F;08052.2F; 120610F;121047F 10V:020147nF;04020.47F;06030.47F;08052.2F; 12064.7F;121047F 6.3V ; 4V ; TT series ; All X6S/X7S items; Size1812 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS 1G or RxC 10 -F whichever is smaller. Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet APPENDIXES Tape & reel dimensions Fig. 2 The dimension of paper tape Fig. 3 The dimension of plastic tape Size 0402 Thickness E 0603 S, X A 0805 B 0.70 +/-0.20 1.20 +/-0.20 1.05 +/-0.30 1.80 +/-0.30 1.50 +/-0.20 2.30 +/-0.20 A0 B0 T 0.80 1.20 1.15 1206 C, J, D C, D, I B 1.50 +/-0.20 2.30 +/-0.20 < 1.80 1.90 +/-0.50 3.50 +/-0.50 < 2.00 < 3.70 1.20 0.23 +/-0.1 1.20 0.23 +/-0.1 < 2.70 C,D,G,K 1210 M 1808 D, G, K <2.30 < 3.05 < 3.05 < 3.20 < 2.50 < 3.90 < 4.00 < 3.80 < 3.80 <4.00 < 5.30 < 5.30 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.25 +/-0.1 0.25 +/-0.1 G, P 1812 D, G, K M, U K0 - - - - < 2.50 - < 2.50 < 2.50 < 1.50 < 2.50 < 3.20 < 2.50 < 2.50 W 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.10 2.00 +/-0.05 2.00 +/-0.05 1.50 +0.1/-0 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 8.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 1.50 +0.1/-0 1.00 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 12.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.10 1.50 +0.1/-0 1.50 +/-0.10 1.75 +/-0.10 5.50 +/-0.10 12.00 +/-0.30 4.00 +/-0.10 40.00 +/-0.20 8.00 +/-0.10 2.00 +/-0.10 1.50 +0.1/-0 1.50 +/-0.10 1.75 +/-0.10 5.50 +/-0.10 P0 10xP0 P1 P2 D0 D1 - - - - E 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 F 1.75 +/-0.10 3.50 +/-0.05 Size Reel size C W1 A N 0402, 0603, 0805, 1206, 1210 7" 10" 13" 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 178.01.0 250.01.0 330.01.0 60.0+1.0/-0 100.01.0 1001.0 1808, 1812 7" 13.0+0.5/-0.2 12.4+2.0/-0 178.01.00 60.0+1.0/-0 Fig. 4 The dimension of reel Page 15 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet Description of customer label a. Customer name b. WTC order series and item number c. Customer P/O d. Customer P/N e. Description of product f. Quantity g. Bar code including quantity & WTC P/N or customer h. WTC P/N i. Shipping date j. Order bar code including series and item numbers k. Serial number of label Constructions No. Name NPO X7R, X5R, Y5V 1 Ceramic material CaZrO3 based BaTiO3 based 2 Inner electrode 3 4 Termination 5 Ni Inner layer Cu + Ag Polymer Middle layer Ni Outer layer Sn Fig. 5 The construction of MLCC Storage and handling conditions (1) To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Page 16 of 17 ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018 Multilayer Ceramic Capacitors Approval Sheet Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. 4 / sec max Over 60sec at least by natural cooling Fig. 6 Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Page 17 of 17 Fig. 7 Recommended wave soldering profile for SMT process with SnAgCu series solder. ASC_Soft termination_(SH_6.3V to 100V)_020N_DS Dec. 2018