HEF4051B 8-channel analog multiplexer/demultiplexer Rev. 12 -- 25 March 2016 Product data sheet 1. General description The HEF4051B is an 8-channel analog multiplexer/demultiplexer with three address inputs (S1 to S3), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). With E LOW, one of the eight switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3. If break before make is needed, then it is necessary to use the enable input. VDD and VSS are the supply voltage connections for the digital control inputs (S1 to S3, and E). The VDD to VSS range is 3 V to 15 V. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD VEE may not exceed 15 V. Unused inputs must be connected to VDD, VSS, or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground). VEE and VSS are the supply voltage connections for the switches. 2. Features and benefits Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from 40 C to +85 C and 40 C to +125 C Complies with JEDEC standard JESD 13-B 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating HEF4051B Nexperia 8-channel analog multiplexer/demultiplexer 4. Ordering information Table 1. Ordering information All types operate from 40 C to +125 C. Type number Package Name Description Version HEF4051BT SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 HEF4051BTS SSOP16 plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 HEF4051BTT TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 5. Functional diagram 9'' < 6 < < 6 < /2*,& /(9(/ &219(56,21 < 2) '(&2'(5 6 < < ( < = 966 Fig 1. 9(( DDF Functional diagram HEF4051B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 12 -- 25 March 2016 (c) Nexperia B.V. 2017. All rights reserved 2 of 22 HEF4051B Nexperia 8-channel analog multiplexer/demultiplexer VDD + 0.5 V VI input voltage II/O input/output current IDD supply current Tstg storage temperature Tamb ambient temperature total power dissipation Ptot P [1] [2] power dissipation Tamb = 40 C to +125 C [1] Min Max Unit 0.5 +18 V 18 +0.5 V - 10 mA 0.5 VDD + 0.5 - 10 V mA - 50 mA 65 +150 C 40 +125 C [2] SO16 package - 500 mW SSOP16 package - 500 mW TSSOP16 package - 500 mW - 100 mW per output To avoid drawing VDD current out of terminal Z, when switch current flows into terminals Y, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VDD current will flow out of terminals Y, and in this case there is no limit for the voltage drop across the switch, but the voltages at Y and Z may not exceed VDD or VEE. For SO16 package: Ptot derates linearly with 8 mW/K above 70 C. For SSOP16 and TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60 C. HEF4051B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 12 -- 25 March 2016 (c) Nexperia B.V. 2017. All rights reserved 6 of 22 HEF4051B Nexperia 8-channel analog multiplexer/demultiplexer 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VDD supply voltage see Figure 7 3 - 15 V VI input voltage 0 - VDD V Tamb ambient temperature in free air 40 - +125 C t/V input transition rise and fall rate VDD = 5 V - - 3.75 s/V VDD = 10 V - - 0.5 s/V VDD = 15 V - - 0.08 s/V DDF 9'' 966 9 RSHUDWLQJDUHD 9'' 9(( 9 Fig 7. Operating area as a function of the supply voltages 10. Static characteristics Table 6. Static characteristics VSS = VEE = 0 V; VI = VSS or VDD unless otherwise specified. Symbol Parameter VIH VIL II HIGH-level input voltage LOW-level input voltage input leakage current HEF4051B Product data sheet Tamb = 40 C Tamb = 25 C Tamb = 85 C Tamb = 125 C Unit Conditions VDD Min Max Min Max Min Max Min Max IO < 1 A 5V 3.5 - 3.5 - 3.5 - 3.5 - V 10 V 7.0 - 7.0 - 7.0 - 7.0 - V 15 V 11.0 - 11.0 - 11.0 - 11.0 - V IO < 1 A 5V - 1.5 - 1.5 - 1.5 - 1.5 V 10 V - 3.0 - 3.0 - 3.0 - 3.0 V 15 V - 4.0 - 4.0 - 4.0 - 4.0 V 15 V - 0.1 - 0.1 - 1.0 - 1.0 A All information provided in this document is subject to legal disclaimers. Rev. 12 -- 25 March 2016 (c) Nexperia B.V. 2017. All rights reserved 7 of 22 HEF4051B Nexperia 8-channel analog multiplexer/demultiplexer Table 6. Static characteristics ...continued VSS = VEE = 0 V; VI = VSS or VDD unless otherwise specified. Symbol Parameter IS(OFF) OFF-state leakage current Conditions CI Max Min Max Min Max Min Max Z port; 15 V all channels OFF; see Figure 8 - - - 1000 - - - - nA 15 V - - - 200 - - - - nA 5V - 5 - 5 - 150 - 150 A 10 V - 10 - 10 - 300 - 300 A 15 V - 20 - 20 - 600 - 600 A - - - - 7.5 - - - - pF supply current IO = 0 A input capacitance Tamb = 85 C Tamb = 125 C Unit Min Y port; per channel; see Figure 9 IDD Tamb = 40 C Tamb = 25 C VDD Sn, E inputs 10.1 Test circuits 9'' 6WR6 9''RU966