SBH15-03
No.6968-1/3
Features
•Supports automatic mounting and permits SBH15-03 applied sets to be made smaller.
•Low forward voltage (VF max=0.3V).
•Average rectified current : IO=1.5A.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Peak Reverse Voltage VRM 30 V
Average Rectified Current IO50Hz sine wave, Tc=105°C, Load resistor 1.5 A
Surge Forward Current IFSM 50Hz sine wave 30 A
non-repetitive, 1cycle peak value
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Forward Voltage VFIF=0.5A 0.30 V
IF=1.5A 0.36 V
Reverse Current IRVR=30V 1 mA
Thremal Resistance θi-l Junction-Lead 20 °C/W
θi-a Junction-Ambient, mounted on an 80 °C/W
almina board.
Marking : I
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN6968B
D1003 TS IM TA-100908 / 62901 GI IM / 51001 GI IM
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SBH15-03 Schottky Barrier Diode
30V, 1.5A Rectifier
SBH15-03
No.6968-2/3
Package Dimensions
unit : mm
1300
1.0 1.8
1.0 1.0
1.8
1.0
1.4
0.5
2.8
Cathode mark
3.9
SANYO : SHP
0.5
1.0
2.0
2.5
3.0
1.5
1
2
3
4
5
6
7
IT03439 IT03440
IT03442
0.1 0.3 0.5 0.70 0.2 0.4 0.6
0 10203040
0 10203040
0 0
2
1.0
7
5
3
10
7
5
3
2
0.1 0.1
2
10
1.0
7
5
3
2
7
5
3
100
7
5
3
2
1000
7
5
3
2
0123456
25°C
100°C
75°C
50°C
Tc=125°C
Tc=125°C
0.2
0.5
DC
DC
SIN
0.2
0.5
SIN
Tj=125°C
IO
tp
D=tp / T
T
0
Tj=125°C
T
0
IT03441
VR
tp
D=tp / T
PF -- IO
IF -- VF
PR -- VR
IR -- VR
Forward Power Dissipation, PF -- W
Reverse Power Dissipation, PR -- W
Output Current, IO -- A
Forward Voltage, VF -- V
Forward Current, IF -- A
Rev erse Voltage, VR -- V
Reverse Current, IR -- mA
Rev erse Voltage, VR -- V
SBH15-03
No.6968-3/3
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 2003. Specifications and information herein are subject
to change without notice.
PS
0
0.5
1.0
2.0
2.5
3.0
3.5
1.5
0 25 50 75 100 125 150
1.0 10
23 57 100
23 57
DC
0.2
0.5
Tj=125°C
VR=15V
Mounted on a print board
IO
tp
D=tp / T
T
0
IT03443
0
5
10
20
25
30
35
15
Ta=25°C
50Hz
IT03444
Sine wave
IFSM -- n
Peak Surge Forward Current, IFSM -- A
Number of Cycles, n
IO -- Tc
Output Current, IO -- A
Case Temperature, Tc -- °C
