BAT62... Silicon Schottky Diode * Low barrier diode for detectors up to GHz frequencies * Pb-free (RoHS compliant) package BAT62 " BAT62-02W BAT62-03W BAT62-07W ! " BAT62-02L BAT62-02LS 4 ! , , , BAT62-07L4 , 1 3 D2 D1 2 1 2 BAT62-09s $ " # , , ! ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT62 BAT62-02L BAT62-02LS* BAT62-02W BAT62-03W BAT62-07L4 BAT62-07W BAT62-09s Package SOT143 TSLP-2-1 TSSLP-2-1 SCD80 SOD323 TSLP-4-4 SOT343 SOT363 Configuration anti-parallel pair single, leadless single, leadless single single parallel pair, leadless parallel pair parallel high, high isolation LS(nH) 2 0.4 0.2 0.6 1.8 0.4 1.8 1.6 Marking 62s L U 62 white L 62 62s 69s * Preliminary Data 1 2011-06-15 BAT62... Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Value Diode reverse voltage VR 40 V Forward current IF 20 mA Total power dissipation Ptot mW BAT62, TS 85 C 100 BAT62-02L, -07L4, -03W, TS 108 C 100 BAT62-02W, TS 109 C 100 BAT62-07W, TS 103 C 100 BAT62-09S, TS 105 C 100 Junction temperature Tj Storage temperature Tstg Unit 150 C -55 ... 150 Thermal Resistance Parameter Symbol Junction - soldering point1) RthJS Value Unit K/W BAT62 650 BAT62-02L, -07L4, -03W 420 BAT62-02W 410 BAT62-07W 470 BAT62-09S tbd Electrical Characteristics at TA = 25C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. IR - - 10 A VF - 0.58 1 V VF - - 20 mV DC Characteristics Reverse current VR = 40 V Forward voltage IF = 2 mA Forward voltage matching2) IF = 2 mA 1For calculation of RthJA please refer to Application Note Thermal Resistance 2V F is the difference between lowest and highest VF in a multiple diode component. 2 2011-06-15 BAT62... Electrical Characteristics at T A = 25C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. CT - 0.35 0.6 pF R0 - 225 - k AC Characteristics Diode capacitance VR = 0 V, f = 1 MHz Differential resistance VR = 0 V, f = 10 kHz 3 2011-06-15 BAT62... Diode capacitance CT = (VR ) Reverse current IR = (VR ) TA = Parameter f = 1MHz 1.0 CT BAT 62 10 3 EHD07062 uA pF 0.8 125C IR 10 2 0.6 85C 10 1 0.4 10 0 25C 0.2 0.0 0 10 20 30 V 10 -1 0 40 5 10 15 20 25 30 V 40 VR VR Forward current IF = (VF) Forward current IF = (TS ) TA = Parameter BAT62 10 4 22 mA uA 25C -40C 85C 18 125C 16 IF IF 10 3 14 12 10 8 10 2 6 4 2 10 1 0 0.2 0.4 0.6 0.8 1 1.2 V 0 0 1.5 VF 15 30 45 60 75 90 105 120 C 150 TS 4 2011-06-15 BAT62... Forward current IF = (TS ) Forward current IF = (TS ) BAT62-02L, -07L4 BAT62-02W 22 22 mA 18 18 16 16 14 14 IF IF mA 12 12 10 10 8 8 6 6 4 4 2 2 0 0 15 30 45 60 75 90 105 120 C 0 0 150 15 30 45 60 75 90 105 120 C TS Forward current IF = (TS ) Forward current IF = (TS ) BAT62-03W BAT62-07W 22 22 mA mA 18 18 16 16 14 14 IF IF 150 TS 12 12 10 10 8 8 6 6 4 4 2 2 0 0 15 30 45 60 75 90 105 120 C 0 0 150 TS 15 30 45 60 75 90 105 120 C 150 TS 5 2011-06-15 BAT62... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT62 IFmax / IFDC = (t p) BAT62 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT62-02L, -07L4 IFmax / IFDC = (t p) BAT62-02L, -07L4 10 3 10 1 RthJS IFmax/IFDC K/W 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 2 10 1 -6 10 10 -5 10 -4 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - -3 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 6 2011-06-15 BAT62... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT62-02W IFmax / IFDC = (t p) BAT62-02W 10 3 10 1 RthJS IFmax/IFDC K/W - 10 2 10 1 -7 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 10 -6 10 -5 10 -4 10 -3 10 tp -2 s 10 0 10 0 tp Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT62-03W IFmax / IFDC = (t p) BAT62-03W 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 7 2011-06-15 BAT62... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT62-07W IFmax / IFDC = (t p) BAT62-07W 10 3 10 1 RthJS IFmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 10 -6 10 -5 10 -4 10 -3 10 -2 tp s 10 0 tp Rectifier voltage Vout = (Vin) Testcircuit f = 900MHz RL = Parameter in k 10 4 mV 10 D.U.T 3 V VO 10 2 I R IN C 50 1nF L R L V0 10 1 10 0 1000 500 200 100 50 20 10 10 -1 10 -2 10 -3 0 10 10 1 10 2 10 3 mV 10 4 VI 8 2011-06-15 Package SCD80 BAT62... Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 0.1 0.2 0.05 10MAX. 1.7 0.1 1 0.3 0.05 Cathode marking 7 1.5 1.3 0.1 A 2 0.7 0.1 0.35 1.45 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel o330 mm = 10.000 Pieces/Reel Reel with 2 mm Pitch 2 0.2 2.5 8 1.45 Standard 4 Cathode marking 0.4 0.9 Cathode marking 9 0.7 2011-06-15 BAT62... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 10 2011-06-15 Package SOD323 11 BAT62... 2011-06-15 Package SOT143 BAT62... 2 0.1 MAX. 10 MAX. 1 1 0.1 0.2 0.8 +0.1 -0.05 0.4 +0.1 -0.05 A 5 0...8 0.2 M A 0.25 M B 1.7 0.08...0.1 1.3 0.1 3 2.4 0.15 4 B 10 MAX. 2.9 0.1 1.9 0.15 MIN. Package Outline Foot Print 1.2 0.8 0.9 1.1 0.9 0.8 1.2 0.8 0.8 Marking Layout (Example) RF s 56 Manufacturer Pin 1 2005, June Date code (YM) BFP181 Type code Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 0.2 2.6 8 4 Pin 1 3.15 1.15 12 2011-06-15 Package SOT343 BAT62... Package Outline 0.9 0.1 2 0.2 0.1 MAX. 1.3 0.1 A 1 2 0.1 MIN. 0.15 1.25 0.1 3 2.1 0.1 4 0.3 +0.1 -0.05 +0.1 0.15 -0.05 0.6 +0.1 -0.05 4x 0.1 0.2 M M A Foot Print 1.6 0.8 0.6 1.15 0.9 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BGA420 Type code Pin 1 Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 13 2011-06-15 Package SOT363 BAT62... Package Outline 2 0.2 0.9 0.1 +0.1 6x 0.2 -0.05 0.1 0.1 MAX. M 0.1 Pin 1 marking 1 2 3 A 1.25 0.1 4 0.1 MIN. 5 2.1 0.1 6 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 1.6 0.9 0.7 0.3 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 0.2 2.3 8 4 Pin 1 marking 1.1 2.15 14 2011-06-15 Package TSLP-2-1 15 BAT62... 2011-06-15 Package TSLP-4-4 16 BAT62... 2011-06-15 Package TSSLP-2-1 17 BAT62... 2011-06-15 BAT62... Edition 2009-11-16 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com>). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 18 2011-06-15