SN54HCT14, SN74HCT14 HEX SCHMITT-TRIGGER INVERTERS SCLS225F - JULY 1995 - REVISED OCTOBER 2010 D D D D Operating Voltage Range of 4.5 V to 5.5 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 20-A Max ICC Typical tpd = 18 ns D 4-mA Output Drive at 5 V D Low Input Current of 1 A Max D Inputs Are TTL-Voltage Compatible SN54HCT14 . . . FK PACKAGE (TOP VIEW) 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 6A 6Y 5A 5Y 4A 4Y 2A NC 2Y NC 3A 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A 1A 1Y 2A 2Y 3A 3Y GND 1Y 1A NC VCC 6A SN54HCT14 . . . J OR W PACKAGE SN74HCT14 . . . D, DB, DGV, N, OR PW PACKAGE (TOP VIEW) NC - No internal connection description/ordering information The 'HCT14 devices contain six independent inverters. The devices perform the Boolean function Y = A in positive logic. ORDERING INFORMATION PDIP - N SN74HCT14N Tube of 50 SN74HCT14D Reel of 2500 SN74HCT14DRG3 Reel of 250 SN74HCT14DT Reel of 2000 SN74HCT14DBR Reel of 2000 SN74HCT14PWR Reel of 250 SN74HCT14PWT TVSOP - DGV Reel of 2000 SN74HCT14DGVR HT14 CDIP - J Tube of 25 SNJ54HCT14J SNJ54HCT14J CFP - W Tube of 150 SNJ54HCT14W SNJ54HCT14W LCCC - FK Tube of 55 SNJ54HCT14FK SNJ54HCT14FK SSOP - DB TSSOP - PW -55C to 125C TOP-SIDE MARKING Tube of 25 SOIC - D -40C 40C to 85C ORDERABLE PART NUMBER PACKAGE TA SN74HCT14N HCT14 HT14 HT14 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright (c) 2003-2010, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN54HCT14, SN74HCT14 HEX SCHMITT-TRIGGER INVERTERS SCLS225F - JULY 1995 - REVISED OCTOBER 2010 logic diagram (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54HCT14 SN74HCT14 UNIT MIN MAX MIN MAX 4.5 5.5 4.5 5.5 V V VCC Supply voltage VI Input voltage 0 VCC 0 VCC VO Output voltage 0 VCC 0 VCC V TA Operating free-air temperature -55 125 -40 85 C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54HCT14, SN74HCT14 HEX SCHMITT-TRIGGER INVERTERS SCLS225F - JULY 1995 - REVISED OCTOBER 2010 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VCC TA = 25C SN54HCT14 SN74HCT14 MIN TYP MAX MIN MAX MIN MAX VT+ Positive-going Positive going threshold 4.5 V 1.2 1.5 1.9 1.2 1.9 1.2 1.9 5.5 V 1.4 1.7 2.1 1.4 2.1 1.4 2.1 VT- Negative-going Negative going threshold 4.5 V 0.5 0.9 1.2 0.5 1.2 0.5 1.2 5.5 V 0.6 1 1.4 0.6 1.4 0.6 1.4 VT Hysteresis (VT+ - VT-) 4.5 V 0.4 0.6 1.4 0.4 1.4 0.4 1.4 5.5 V 0.4 0.65 1.5 0.4 1.5 0.4 1.5 IOH = -20 A 4.5 V 4.4 4.49 4.4 4.4 IOH = -4 mA 4.5 V 3.98 4.3 3.7 3.84 IOL = 20 A 4.5 V 0.001 0.1 0.1 0.1 IOL = 4 mA 4.5 V 0.17 0.26 0.4 0.33 VOH VOL TEST CONDITIONS UNIT V V V V V II VI = VCC or GND 5.5 V 0.1 1 1 A ICC VI = VCC or GND, IO = 0 5.5 V 2 40 20 A ICC One input at 0.5 V or 2.4 V, Other inputs at GND or VCC 5.5 V 0.2 2.4 3 2.9 mA Ci VI = VCC or GND 3 10 10 10 pF 5V This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or VCC. switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tpd FROM (INPUT) TO (OUTPUT) A Y tt Y VCC TA = 25C MIN SN54HCT14 MIN MAX SN74HCT14 TYP MAX MIN MAX 4.5 V 20 32 48 40 5.5 V 18 30 45 38 4.5 V 7 15 22 19 5.5 V 6 14 20 17 UNIT ns ns operating characteristics, TA = 25C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance No load POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP 10 UNIT pF 3 SN54HCT14, SN74HCT14 HEX SCHMITT-TRIGGER INVERTERS SCLS225F - JULY 1995 - REVISED OCTOBER 2010 PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point Input 3V 1.3 V 1.3 V 0V CL = 50 pF (see Note A) tPLH In-Phase Output LOAD CIRCUIT 1.3 V 10% tPHL 90% 90% tr Input 1.3 V 10% 90% tPHL VCC 90% 1.3 V 10% 0 V tr Out-of-Phase Output 90% VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES tPLH 1.3 V 10% tf tf VOH 1.3 V 10% V OL tf 1.3 V 10% 90% tr VOH VOL VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT RISE AND FALL TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54HCT14, SN74HCT14 HEX SCHMITT-TRIGGER INVERTERS SCLS225F - JULY 1995 - REVISED OCTOBER 2010 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs INPUT VOLTAGE 0.5 SUPPLY CURRENT vs INPUT VOLTAGE 0.5 VCC = 4.5 V 0.45 0.4 I CC - Supply Current - mA I CC - Supply Current - mA 0.4 0.35 0.3 VI = 0 to VCC 0.25 VI = VCC to 0 0.2 AA AA VI = 0 to VCC 0.35 VI = VCC to 0 0.3 0.25 0.2 AA AA 0.15 0.1 0.15 0.1 0.05 0 VCC = 5.5 V 0.45 0.05 0 3.16 3.61 0.45 0.9 1.35 1.8 2.26 2.7 0 4 0 0.55 1.1 1.66 2.2 2.76 3.3 VI - Input Voltage - V VI - Input Voltage - V OUTPUT VOLTAGE vs INPUT VOLTAGE OUTPUT VOLTAGE vs INPUT VOLTAGE 6 6 VCC = 4.5 V VCC = 5.5 V 5 VO - Output Voltage - V VO - Output Voltage - V 5 4 VI = Down 3 VI = Up 2 1 0 -1 3.86 4.4 4.97 4 VI = Down 3 VI = Up 2 1 0 0 0.75 1.5 2.27 3 3.77 -1 0 VI - Input Voltage - V POST OFFICE BOX 655303 0.92 1.84 2.76 3.68 4.6 VI - Input Voltage - V * DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8689001CA ACTIVE CDIP J 14 1 TBD Call TI Call TI 5962-8689001DA ACTIVE CFP W 14 1 TBD Call TI Call TI SN74HCT14D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) SN74HCT14DBLE OBSOLETE SSOP DB 14 SN74HCT14DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DGVRE4 ACTIVE TVSOP DGV 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DGVRG4 ACTIVE TVSOP DGV 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DRG3 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) SN74HCT14DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DT ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 CU NIPDAU Level-1-260C-UNLIM Call TI CU SN Samples (Requires Login) 5962-86890012A TBD (3) Call TI Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 5-Sep-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14DTG4 ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HCT14NE4 ACTIVE PDIP N 14 SN74HCT14PWLE OBSOLETE TSSOP PW 14 SN74HCT14PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14PWT ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14PWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HCT14PWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54HCT14FK ACTIVE LCCC FK 20 1 TBD SNJ54HCT14J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type SNJ54HCT14W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type Call TI Samples (Requires Login) SN74HCT14DTE4 TBD (3) Call TI POST-PLATE N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54HCT14, SN74HCT14 : * Catalog: SN74HCT14 * Automotive: SN74HCT14-Q1, SN74HCT14-Q1 * Military: SN54HCT14 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Military - QML certified for Military and Defense Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74HCT14DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74HCT14DGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74HCT14DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT14DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT14DT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT14PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74HCT14PWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HCT14DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74HCT14DGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74HCT14DR SOIC D 14 2500 367.0 367.0 38.0 SN74HCT14DR SOIC D 14 2500 333.2 345.9 28.6 SN74HCT14DT SOIC D 14 250 367.0 367.0 38.0 SN74HCT14PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74HCT14PWT TSSOP PW 14 250 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MPDS006C - FEBRUARY 1996 - REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0-8 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins - MO-153 14/16/20/56 Pins - MO-194 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated