DETAIL SPECIFICATION SHEET
CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING),
PLUG, (THREADED COUPLING, SELF-LOCKING, CRIMP SOCKET CONTACT),
(SERIES III, CLASSES A, G, K, M, R, T, W AND Z)
This specificat ion is approved for use by all Departments
and Agencies of the Department of Def ense.
The requirement s for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-83723.
FIGURE 1. Dimensions and configurat i ons.
AMSC N/A FSC 5935
INCH-POUND INCH-POUND
MIL-DTL-83723/95G
1 October 2009
SUPERSEDING
MIL-DTL-83723/95F
15 September 2006
MIL-DTL-83723/95G
2
FIGURE 1. Dimensions and configurat i ons - Continued.
MIL-DTL-83723/95G
3
Shell
size A
Thread
UNEF-2B
B
max C
H
min
J K W
max
8 .5625-24 .290
(7.37) .025
(.64) .294
(7.47) .405
(10.29)
.396
(10.06)
.575
(14.61) .832
(21.13)
10 .6875-24 .388
(9.86) .031
(.79) .428
(10.87) .526
(13.36)
.517
(13.13)
.707
(17.96) .959
(24.36)
12 .875-20 .558
(14.17) .031
(.79) .598
(15.19) .696
(17.68)
.687
(17.45)
.895
(22.73) 1.097
(27.86)
14 .9375-20 .627
(15.93) .031
(.79) .667
(16.94) .765
(19.43)
.756
(19.20)
.957
(24.31) 1.236
(31.39)
16 1.0625-18 .772
(19.61) .031
(.79) .794
(20.17) .892
(22.66)
.883
(22.43)
1.084
(27.53) 1.360
(34.54)
18 1.1875-18 .860
(21.84) .031
(.79)) .900
(22.86) .998
(25.35)
.989
(25.12)
1.209
(30.71) 1.473
(37.41)
20 1.3125-18 .985
(25.02) .031
(.79)) 1.025
(26.04) 1.123
(28.52)
1.114
(28.30)
1.334
(33.88) 1.586
(40.28)
22 1.4375-18 1.110
(28.19) .031
(.79) 1.150
(29.21) 1.248
(31.70)
1.239
(31.47)
1.459
(37.06) 1.703
(43.26)
24 1.5625-18 1.235
(31.37) .031
(.79) 1.275
(32.39) 1.373
(34.87)
1.364
(34.65)
1.584
(40.23) 1.846
(46.89)
FIGURE 1. Dimensions and configurat i ons - Continued.
MIL-DTL-83723/95G
4
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.005 0.13 .290 7.37 .707 17.96 1.114 28.29
.007 0.18 .294 7.47 .756 19.20 1.123 28.52
.025 0.64 .309 7.85 .765 19.43 1.150 29.21
.031 0.79 .330 8.38 .772 19.61 1.180 29.97
.035 0.89 .366 9.30 .794 20.17 1.1875 30.16
.048 1.22 .377 9.58 .832 21.13 1.209 30.71
.051 1.30 .388 9.86 .860 21.84 1.235 31.37
.054 1.37 .396 10.05 .875 22.23 1.236 31.39
.068 1.73 .400 10.16 .880 22.35 1.239 31.47
.076 1.93 .405 10.29 .883 22.43 1.248 31.70
.092 2.34 .428 10.87 .892 22.66 1.275 32.39
.096 2.44 .500 12.70 .895 22.73 1.334 33.88
.107 2.71 .510 12.95 .900 22.86 1.360 34.54
.114 2.90 .517 13.13 .9375 23.81 1.364 34.65
.118 3.00 .526 13.36 .957 24.31 1.373 34.87
.125 3.18 .528 14.71 .959 24.36 1.4375 36.51
.146 3.71 .5625 14.29 .985 25.02 1.459 37.06
.150 3.81 .575 14.60 .989 25.12 1.5625 39.69
.206 5.23 .598 15.19 .998 25.35 1.584 40.23
.210 5.33 .627 15.93 1.025 26.03 1.586 40.28
.215 5.46 .667 16.94 1.0625 26.99 1.703 43.26
.235 5.97 .675 17.15 1.084 27.53 1.846 46.89
.260 6.60 .6875 17.46 1.097 27.86
.263 6.68 .696 17.68 1.110 28.19
NOTES:
1. Dimensions are i n i nches.
2. Metric equivalents are given for information only.
3. Unless otherwis e specified, tolerances are ± .005 (0.13 m m ) for three place decim als and
± .01 (0.25 mm) f or two place decimals and ± 1° for all angles.
4. The dimensio ns showing the relationship between the coupling ring and connector shell apply only
when the coupli ng ring is in the fully forward position.
5. Rear accesso ry i nterchangeability dimensions shall be in accordance with MIL-DTL-83723.
6. Shell size 8 will not mate with MIL-DTL-26500 connectors.
7. The centerline of indicated projection must be located on vertical cent erline ± 2.0°.
8. See table I for cont act cavities requi ring this dimension.
FIGURE 1. Dimensions and configurat i ons - Continued.
MIL-DTL-83723/95G
5
REQUIREMENTS:
Dimensions and configurations: See figure 1.
This connector mat es with MIL-DTL-83723/83, MIL-DTL-83723/85, MIL-DTL-83723/90 and
MIL-DTL-83723/88 and MIL-DTL-83723/89.
Insert arrangements and polarizing positions: See MI L-STD-1554 and table I.
TABLE I. Insert arrangements requiring reduced diameters for lead-in
chamfers on contact caviti es.
Shell size Insert arrangements Contact cavities
8 03 1, 2, 3
10 06 1, 2, 3, 4, 5, 6
Connector accessories: See SAE-AS85049.
Part or Identif ying Number (PIN) ex ample:
M83723/ 95 K 22 55 N
Military desig nation
Specification sheet number
Class
Shell size
Insert arrangement
Polarizing position
Changes from prev i ous issue. Marginal notations are not use d i n this revision to identi fy changes with
respect to the previous issue, due to t he extent of the changes.
Referenced docum ents. In addition t o M IL-DTL-83723, this document references the following:
MIL-DTL-83723/89
MIL-DTL-83723/90
MIL-DTL-83723/95G
6
CONCLUDING MATERIAL
Custodians: P reparing activity:
Army - CR DLA - CC
Navy - AS
Air Force - 85
DLA - CC
Review activities: (Project 5935-2008-170)
Army - AR, MI
Navy - EC
Air Force - 19, 99
NOTE: The activ i ties listed above were interested in this document as of the date of this docu m ent.
Since organizat ions and responsibilit ies can change, y ou should verify the currency of the informati on
above using the A SSIST Online database at http://assist.daps.dla.mil.