LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 LMV931-N/LMV931-N-Q1 /LMV932-N/LMV932-N-Q1/LMV934-N/LMV934-N-Q1 Single/Dual/Quad 1.8V, RRIO Operational Amplifiers Check for Samples: LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1, LMV934-N, LMV934-N-Q1 FEATURES 1 (Typical 1.8V Supply Values; Unless Otherwise Noted) 2 * * * * * * * * * LMV931-N/LMV932-N/LMV934-N are Available in Automotive AEC-Q100 Grade 1 Versions Guaranteed 1.8V, 2.7V and 5V Specifications Output Swing - w/600 Load 80mV from Rail - w/2k Load 30mV from Rail VCM 200mV Beyond Rails Supply Current (Per Channel) 100A Gain Bandwidth Product 1.4MHz Maximum VOS 4.0mV Ultra Tiny Packages Temperature Range -40C to 125C APPLICATIONS * * * * * * * Consumer Communication Consumer Computing PDAs Audio Pre-amp Portable/Battery-powered Electronic Equipment Supply Current Monitoring Battery Monitoring DESCRIPTION The LMV931-N/LMV932-N/LMV934-N are low voltage, low power operational amplifiers. LMV931N/LMV932-N/LMV934-N operate from +1.8V to +5.5V supply voltages and have rail-to-rail input and output. LMV931-N/LMV932-N/LMV934-N input common mode voltage extends 200mV beyond the supplies which enables user enhanced functionality beyond the supply voltage range. The output can swing railto-rail unloaded and within 105mV from the rail with 600 load at 1.8V supply. The LMV931-N/LMV932N/LMV934-N are optimized to work at 1.8V which make them ideal for portable two-cell battery powered systems and single cell Li-Ion systems. LMV931-N/LMV932-N/LMV934-N exhibit excellent speed-power ratio, achieving 1.4MHz gain bandwidth product at 1.8V supply voltage with very low supply current. The LMV931-N/LMV932-N/LMV934-N are capable of driving a 600 load and up to 1000pF capacitive load with minimal ringing. LMV931N/LMV932-N/LMV934-N have a high DC gain of 101dB, making them suitable for low frequency applications. The single LMV931-N is offered in space saving 5Pin SC70 and SOT-23 packages. The dual LMV932N are in 8-Pin VSSOP and SOIC packages and the quad LMV934-N are in 14-Pin TSSOP and SOIC packages. These small packages are ideal solutions for area constrained PC boards and portable electronics such as cellular phones and PDAs. Typical Application 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2001-2013, Texas Instruments Incorporated LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Charged Device Model ESD Tolerance (3) 750V Machine Model 200V Human Body Model 2000V Supply Voltage (V+-V -) 6V Differential Input Voltage Supply Voltage Voltage at Input/Output Pins V++0.3V, V- -0.3V Storage Temperature Range -65C to 150C Junction Temperature (4) 150C For soldering specifications: See product folder at www.ti.com and http://www.ti.com/lit/SNOA549 (1) (2) (3) (4) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for availability and specifications. Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC). The maximum power dissipation is a function of TJ(MAX), JA and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(MAX) - TA)/ JA. All numbers apply for packages soldered directly onto a PC Board. Operating Ratings (1) Supply Voltage Range 1.8V to 5.5V -40C to 125C Temperature Range Thermal Resistance (JA) (1) 2 5-Pin SC70 414C/W 5-Pin SOT-23 265C/W 8-Pin VSSOP 235C/W 8-Pin SOIC 175C/W 14-Pin TSSOP 155C/W 14-Pin SOIC 127C/W Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 1.8V DC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 1.8V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol VOS Parameter Input Offset Voltage Condition Min Typ Max Units LMV931-N (Single) 1 4 6 mV LMV932-N (Dual) LMV934-N (Quad) 1 5.5 7.5 mV (2) (3) (2) TCVOS Input Offset Voltage Average Drift 5.5 IB Input Bias Current 15 35 50 nA IOS Input Offset Current 13 25 40 nA IS Supply Current (per channel) 103 185 205 A CMRR Common Mode Rejection Ratio PSRR CMVR Power Supply Rejection Ratio Input Common-Mode Voltage Range LMV931-N, 0 VCM 0.6V 1.4V VCM 1.8V (4) 60 55 78 LMV932-N and LMV934-N 0 VCM 0.6V 1.4V VCM 1.8V (4) 55 50 76 -0.2V VCM 0V 1.8V VCM 2.0V 50 72 1.8V V+ 5V 75 70 100 For CMRR Range TA = 25C 50dB TA -40C to 85C TA = 125C AV VO Large Signal Voltage Gain LMV931-N (Single) - V -0.2 dB -0.2 to 2.1 V+ - V -0.2 V +0.2 77 73 101 RL = 2k to 0.9V, VO = 0.2V to 1.6V, VCM = 0.5V 80 75 105 Large Signal Voltage Gain LMV932-N (Dual) LMV934-N (Quad) RL = 600 to 0.9V, VO = 0.2V to 1.6V, VCM = 0.5V 75 72 90 RL = 2k to 0.9V, VO = 0.2V to 1.6V, VCM = 0.5V 78 75 100 Output Swing RL = 600 to 0.9V VIN = 100mV 1.65 1.63 1.72 1.75 1.74 (4) V + dB dB 0.105 0.120 1.77 0.024 (2) (3) V +0.2 V 0.077 (1) dB + - RL = 600 to 0.9V, VO = 0.2V to 1.6V, VCM = 0.5V RL = 2k to 0.9V VIN = 100mV V/C V 0.035 0.04 Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. For guaranteed temperature ranges, see Input Common-Mode Voltage Range specifications. Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 3 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com 1.8V DC Electrical Characteristics (continued) Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 1.8V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See(1) Symbol VO Parameter Output Swing LMV932-N-Q1 (Dual) Condition RL = 600 to 0.9V VIN = 1 Min Typ 1.65 1.63 1.72 (2) (3) 0.077 RL = 2k to 0.9V VIN = 100mV 1.75 1.74 Output Short Circuit Current (5) (5) (2) 0.105 0.173 1.77 0.024 IO Max Sourcing, VO = 0V VIN = 100mV 4 3.3 8 Sinking, VO = 1.8V VIN = -100mV 7 5 9 Units V 0.035 0.055 mA Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. Output currents in excess of 45mA over long term may adversely affect reliability. 1.8V AC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 1.8V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol Parameter Conditions See (4) Min (2) Typ (3) Max (2) Units SR Slew Rate 0.35 V/s GBW Gain-Bandwidth Product 1.4 MHz m Phase Margin 67 deg Gm Gain Margin 7 dB en Input-Referred Voltage Noise f = 10 kHz, VCM = 0.5V 60 nV/Hz in Input-Referred Current Noise f = 10 kHz 0.08 pA/Hz THD Total Harmonic Distortion f = 1kHz, AV = +1 RL = 600, VIN = 1 VPP 0.023 Amp-to-Amp Isolation See (5) (1) (2) (3) (4) (5) 4 123 % dB Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Connected as voltage follower with input step from V- to V+. Number specified is the slower of the positive and negative slew rates. Input referred, RL = 100k connected to V+/2. Each amp excited in turn with 1kHz to produce VO = 3VPP (For Supply Voltages <3V, VO = V+). Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 2.7V DC Electrical Characteristics Unles s otherwise specified, all limits guaranteed for TJ = 25C. V+ = 2.7V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol VOS Parameter Input Offset Voltage Condition Min Typ Max Units LMV931-N (Single) 1 4 6 mV LMV932-N (Dual) LMV934-N (Quad) 1 5.5 7.5 mV (2) (3) (2) TCVOS Input Offset Voltage Average Drift 5.5 IB Input Bias Current 15 35 50 nA IOS Input Offset Current 8 25 40 nA IS Supply Current (per channel) 105 190 210 A CMRR Common Mode Rejection Ratio PSRR VCM Power Supply Rejection Ratio Input Common-Mode Voltage Range LMV931-N, 0 VCM 1.5V 2.3V VCM 2.7V (4) 60 55 81 LMV932-N and LMV934-N 0 VCM 1.5V 2.3V VCM 2.7V (4) 55 50 80 -0.2V VCM 0V 2.7V VCM 2.9V 50 74 1.8V V+ 5V VCM = 0.5V 75 70 100 For CMRR Range 50dB TA = 25C VO Large Signal Voltage Gain LMV931-N (Single) V -0.2 dB -0.2 to 3.0 V+ - V -0.2 V +0.2 87 86 104 RL = 2k to 1.35V, VO = 0.2V to 2.5V 92 91 110 Large Signal Voltage Gain LMV932-N (Dual) LMV934-N (Quad) RL = 600 to 1.35V, VO = 0.2V to 2.5V 78 75 90 RL = 2k to 1.35V, VO = 0.2V to 2.5V 81 78 100 Output Swing RL = 600 to 1.35V VIN = 100mV 2.55 2.53 2.62 2.65 2.64 (4) dB dB 0.110 0.130 2.675 0.025 (2) (3) V + 0.083 (1) V +0.2 V RL = 600 to 1.35V, VO = 0.2V to 2.5V RL = 2k to 1.35V VIN = 100mV dB + - TA = -40C to 85C TA = 125C AV - V/C V 0.04 0.045 Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. For guaranteed temperature ranges, see Input Common-Mode Voltage Range specifications. Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 5 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com 2.7V DC Electrical Characteristics (continued) Unles s otherwise specified, all limits guaranteed for TJ = 25C. V+ = 2.7V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol VO Parameter Output Swing LMV932-N-Q1 (Dual) Condition RL = 600 to 1.35V VIN = 100mV Min Typ 2.55 2.53 2.62 (2) (3) 0.083 RL = 2k to 1.35V VIN = 100mV 2.65 2.64 Output Short Circuit Current (5) (5) (2) 0.110 0.187 2.675 0.025 IO Max Sourcing, VO = 0V VIN = 100mV 20 15 30 Sinking, VO = 2.7V VIN = -100mV 18 12 25 Units V 0.04 0.059 mA Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. Output currents in excess of 45mA over long term may adversely affect reliability. 2.7V AC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 2.7V, V - = 0V, VCM = 1.0V, VO = 1.35V and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol Parameter Conditions See (4) SR Slew Rate GBW Gain-Bandwidth Product m Gm en Input-Referred Voltage Noise f = 10 kHz, VCM = 0.5V in Input-Referred Current Noise THD Total Harmonic Distortion Amp-to-Amp Isolation See (5) (1) (2) (3) (4) (5) 6 Min (2) Typ (3) Max (2) Units 0.4 V/s 1.4 MHz Phase Margin 70 deg Gain Margin 7.5 dB 57 nVHz f = 10 kHz 0.08 pA/Hz f = 1kHz, AV = +1 RL = 600, VIN = 1VPP 0.022 % 123 dB Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Connected as voltage follower with input step from V- to V+. Number specified is the slower of the positive and negative slew rates. Input referred, RL = 100k connected to V+/2. Each amp excited in turn with 1kHz to produce VO = 3VPP (For Supply Voltages <3V, VO = V+). Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 5V DC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 5V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol VOS Parameter Input Offset Voltage Condition Min Typ Max Units LMV931-N (Single) 1 4 6 mV LMV932-N (Dual) LMV934-N (Quad) 1 5.5 7.5 mV (2) (3) (2) TCVOS Input Offset Voltage Average Drift 5.5 IB Input Bias Current 14 35 50 nA IOS Input Offset Current 9 25 40 nA IS Supply Current (per channel) 116 210 230 A CMRR Common Mode Rejection Ratio 0 VCM 3.8V 4.6V VCM 5.0V (4) 60 55 86 -0.2V VCM 0V 5.0V VCM 5.2V 50 78 75 70 100 V- -0.2 -0.2 to 5.3 PSRR Power Supply Rejection Ratio 1.8V V+ 5V VCM = 0.5V CMVR Input Common-Mode Voltage Range For CMRR Range TA = 25C 50dB TA = -40C to 85C TA = 125C AV VO Large Signal Voltage Gain LMV931-N (Single) - (4) V+ +0.2 V- +0.3 V+ -0.3 88 87 102 RL = 2k to 2.5V, VO = 0.2V to 4.8V 94 93 113 Large Signal Voltage Gain LMV932-N (Dual) LMV934-N (Quad) RL = 600 to 2.5V, VO = 0.2V to 4.8V 81 78 90 RL = 2k to 2.5V, VO = 0.2V to 4.8V 85 82 100 Output Swing RL = 600 to 2.5V VIN = 100mV 4.855 4.835 4.890 4.945 4.935 V dB dB 0.160 0.180 4.967 0.037 (2) (3) dB V+ 0.120 (1) dB V RL = 600 to 2.5V, VO = 0.2V to 4.8V RL = 2k to 2.5V VIN = 100mV V/C V 0.065 0.075 Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. For guaranteed temperature ranges, see Input Common-Mode Voltage Range specifications. Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 7 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com 5V DC Electrical Characteristics (continued) Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 5V, V - = 0V, VCM = V+/2, VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. See(1) Symbol VO Parameter Output Swing LMV932-N-Q1 (Dual) Condition RL = 600 to 2.5V VIN = 100mV Min Typ 4.855 4.807 4.890 (2) (3) 0.120 RL = 2k to 2.5V VIN = 100mV 4.945 4.935 Output Short Circuit Current (5) (5) (2) 0.160 0.218 4.967 0.037 IO Max LMV931-N, Sourcing, VO = 0V VIN = 100mV 80 68 100 Sinking, VO = 5V VIN = -100mV 58 45 65 Units V 0.065 0.075 mA Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. Output currents in excess of 45mA over long term may adversely affect reliability. 5V AC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. V+ = 5V, V - = 0V, VCM = V+/2, VO = 2.5V and R L > 1 M. Boldface limits apply at the temperature extremes. See (1) Symbol Parameter Conditions See (4) Min (2) Typ (3) Max (2) Units SR Slew Rate 0.42 V/s GBW Gain-Bandwidth Product 1.5 MHz m Phase Margin 71 deg Gm Gain Margin 8 dB en Input-Referred Voltage Noise f = 10 kHz, VCM = 1V 50 nV/Hz in Input-Referred Current Noise f = 10 kHz 0.08 pA/Hz THD Total Harmonic Distortion f = 1kHz, AV = +1 RL = 600, VO = 1V PP 0.022 Amp-to-Amp Isolation See (5) (1) (2) (3) (4) (5) 8 123 % dB Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or electrically. All limits are guaranteed by testing or statistical analysis. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. Connected as voltage follower with input step from V- to V+. Number specified is the slower of the positive and negative slew rates. Input referred, RL = 100k connected to V+/2. Each amp excited in turn with 1kHz to produce VO = 3VPP (For Supply Voltages <3V, VO = V+). Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 CONNECTION DIAGRAMS 5-Pin SC70/SOT-23 (LMV931-N) Top View 8-Pin VSSOP/SOIC (LMV932-N) Top View 1 8 14-Pin TSSOP/SOIC (LMV934-N) Top View + V OUT A A 2 - + 7 -IN A OUT B 3 6 +IN A + V - -IN B B 4 5 +IN B Devices with an asterisk (*) are future products. Please contact the factory for availability. Automotive Grade (Q) product incorporates enhanced manufacturing and support processes for the automotive market, including defect detection methodologies. Reliability qualification is compliant with the requirements and temperature grades defined in the AEC Q100 standard. Automotive Grade products are identified with the letter Q. Fully compliant PPAP documentation is available. For more information go to http://www.ti.com/lsds/ti/apps/automotive/end_equipment.page. Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 9 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com Typical Performance Characteristics Unless otherwise specified, VS = +5V, single supply, TA = 25C. Supply Current vs. Supply Voltage (LMV931-N) 100 160 125C SUPPLY CURRENT (eA) 140 Sourcing Current vs. Output Voltage VS = 5V 85C 10 ISOURCE (mA) 120 100 25C 80 -40C 60 VS = 2.7V 1 VS = 1.8V 0.1 40 20 0 0 1 2 3 4 5 6 0.01 0.001 0.01 Figure 1. VS = 5V ISINK (mA) 10 VS = 2.7V 1 VS = 1.8V 0.01 0.1 10 1 OUTPUT VOLTAGE REF TO GND (V) OUTPUT VOLTAGE PROXIMITY TO SUPPLY VOLTAGE (mV ABSOLUTE VALUE) 10 Output Voltage Swing vs. Supply Voltage OUTPUT VOLTAGE PROXIMITY TO SUPPLY VOLTAGE (mV ABSOLUTE VALUE) Sinking Current vs. Output Voltage 0.01 0.001 1 Figure 2. 100 0.1 0.1 OUTPUT VOLTAGE REFERENCED TO V+ (V) SUPPLY VOLTAGE (V) 140 RL = 600: 130 NEGATIVE SWING 120 110 100 90 80 POSITIVE SWING 70 60 0 1 4 2 3 SUPPLY VOLTAGE (V) 5 Figure 3. Figure 4. Output Voltage Swing vs. Supply Voltage Gain and Phase vs. Frequency 6 45 RL = 2k: 40 NEGATIVE SWING 35 30 25 POSITIVE SWING 20 0 1 2 3 4 5 6 SUPPLY VOLTAGE (V) Figure 5. 10 Submit Documentation Feedback Figure 6. Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 Typical Performance Characteristics (continued) Unless otherwise specified, VS = +5V, single supply, TA = 25C. Gain and Phase vs. Frequency Gain and Phase vs. Frequency Figure 7. Figure 8. Gain and Phase vs. Frequency CMRR vs. Frequency 90 VS = 5V 85 CMRR (dB) 80 VS = 2.7V 75 VS = 1.8V 70 65 60 10 1k 100 FREQUENCY (Hz) Figure 9. Figure 10. PSRR vs. Frequency 100 Input Voltage Noise vs. Frequency VS = 5V +PSRR 80 70 -PSRR 60 50 40 30 10 100 1k FREQUENCY (Hz) Figure 11. Copyright (c) 2001-2013, Texas Instruments Incorporated 10k INPUT VOLTAGE NOISE (nV/ Hz) 1000 90 PSRR (dB) 10k 100 10 10 100 1k 10k 100k FREQUENCY (Hz) Figure 12. Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 11 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com Typical Performance Characteristics (continued) Unless otherwise specified, VS = +5V, single supply, TA = 25C. Input Current Noise vs. Frequency THD vs. Frequency 10 1 INPUT CURRENT NOISE (pA/ Hz) RL = 600: AV = +1 THD (%) 1 0.1 1.8V 0.1 2.7V 5V 0.01 10 100 1k 10k 0.01 10 100k 1k 100 Figure 13. 100k Figure 14. THD vs. Frequency 10 10k FREQUENCY (Hz) FREQUENCY (Hz) Slew Rate vs. Supply Voltage 0.5 RL = 600: AV = +10 SLEW RATE (V/Ps) 0.45 THD (%) 1 5V 0.1 FALLING EDGE 0.4 RISING EDGE 0.35 RL = 2k: 0.3 1.8V AV = +1 2.7V 0.01 10 VIN = 1VPP 0.25 100 1k 10k 0 100k 1 4 5 Small Signal Non-Inverting Response Small Signal Non-Inverting Response VS = 1.8V RL = 2 k: Figure 17. Submit Documentation Feedback 6 VS = 2.7V RL = 2 k: (50 mV/DIV) INPUT SIGNAL Figure 16. OUTPUT SIGNAL INPUT SIGNAL OUTPUT SIGNAL (50 mV/DIV) 3 Figure 15. TIME (2.5 Ps/DIV) 12 2 SUPPLY VOLTAGE (V) FREQUENCY (Hz) TIME (2.5 Ps/DIV) Figure 18. Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 Typical Performance Characteristics (continued) Unless otherwise specified, VS = +5V, single supply, TA = 25C. Small Signal Non-Inverting Response Large Signal Non-Inverting Response VIN INPUT SIGNAL VS = 5V OUTPUT SIGNAL (50 mV/DIV) (900 mV/div) RL = 2 k: VOUT VS = 1.8V RL = 2k: AV = +1 TIME (10 Ps/div) TIME (2.5 Ps/DIV) Figure 19. Figure 20. Large Signal Non-Inverting Response Large Signal Non-Inverting Response VIN (2.5 V/div) (1.35V/DIV) VIN VOUT VOUT VS = 2.7V VS = 5.0V RL = 2 k: RL = 2k: AV = +1 AV = +1 TIME (10 Ps/div) TIME (10 Ps/DIV) Figure 21. Figure 22. Short Circuit Current vs. Temperature (Sinking) Short Circuit Current vs. Temperature (Sourcing) 90 90 SHORT CIRCUIT CURRENT (mA) SHORT CIRCUIT CURRENT (mA) 5V 80 5V 70 60 50 40 2.7V 30 20 1.8V 10 0 -40 10 60 TEMPERATURE (C) Figure 23. Copyright (c) 2001-2013, Texas Instruments Incorporated 110 80 70 60 50 40 2.7V 30 20 1.8V 10 0 -40 10 60 TEMPERATURE (C) 110 Figure 24. Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 13 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com Typical Performance Characteristics (continued) Unless otherwise specified, VS = +5V, single supply, TA = 25C. Offset Voltage vs. Common Mode Range Offset Voltage vs. Common Mode Range 3 3 VS = 1.8V VS = 2.7V 2.5 2.5 2 2 25C -40C 1.5 VOS (mV) VOS (mV) 25C 1 0.5 85C 1 0.5 85C 125C 125C 0 0 -0.5 -0.5 -1 -0.4 0 0.4 0.8 -40C 1.5 1.2 1.6 2 -1 -0.4 2.4 0.1 0.6 1.1 1.6 VCM (V) VCM (V) Figure 25. Figure 26. 2.1 2.6 3.1 Offset Voltage vs. Common Mode Range 3 VS = 5V 2.5 2 VOS (mV) -40C 1.5 1 0.5 25C 125C 85C 0 -0.5 -1 -0.4 0.6 1.6 2.6 3.6 4.6 5.6 VCM (V) Figure 27. 14 Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 APPLICATION NOTE INPUT AND OUTPUT STAGE The rail-to-rail input stage of this family provides more flexibility for the designer. The LMV931-N/LMV932N/LMV934-N use a complimentary PNP and NPN input stage in which the PNP stage senses common mode voltage near V- and the NPN stage senses common mode voltage near V+. The transition from the PNP stage to NPN stage occurs 1V below V+. Since both input stages have their own offset voltage, the offset of the amplifier becomes a function of the input common mode voltage and has a crossover point at 1V below V+. This VOS crossover point can create problems for both DC and AC coupled signals if proper care is not taken. Large input signals that include the VOS crossover point will cause distortion in the output signal. One way to avoid such distortion is to keep the signal away from the crossover. For example, in a unity gain buffer configuration and with VS = 5V, a 5V peak-to-peak signal will contain input-crossover distortion while a 3V peakto-peak signal centered at 1.5V will not contain input-crossover distortion as it avoids the crossover point. Another way to avoid large signal distortion is to use a gain of -1 circuit which avoids any voltage excursions at the input terminals of the amplifier. In that circuit, the common mode DC voltage can be set at a level away from the VOS cross-over point. For small signals, this transition in VOS shows up as a VCM dependent spurious signal in series with the input signal and can effectively degrade small signal parameters such as gain and common mode rejection ratio. To resolve this problem, the small signal should be placed such that it avoids the VOS crossover point. In addition to the rail-to-rail performance, the output stage can provide enough output current to drive 600 loads. Because of the high current capability, care should be taken not to exceed the 150C maximum junction temperature specification. INPUT BIAS CURRENT CONSIDERATION The LMV931-N/LMV932-N/LMV934-N family has a complementary bipolar input stage. The typical input bias current (IB) is 15nA. The input bias current can develop a significant offset voltage. This offset is primarily due to IB flowing through the negative feedback resistor, RF. For example, if IB is 50nA and RF is 100k, then an offset voltage of 5mV will develop (VOS = IB x RF). Using a compensation resistor (RC), as shown in Figure 28, cancels this effect. But the input offset current (IOS) will still contribute to an offset voltage in the same manner. Figure 28. Canceling the Offset Voltage due to Input Bias Current Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 15 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com TYPICAL APPLICATIONS HIGH SIDE CURRENT SENSING The high side current sensing circuit (Figure 29) is commonly used in a battery charger to monitor charging current to prevent over charging. A sense resistor RSENSE is connected to the battery directly. This system requires an op amp with rail-to-rail input. The LMV931-N/LMV932-N/LMV934-N are ideal for this application because its common mode input range goes up to the rail. Figure 29. High Side Current Sensing HALF-WAVE RECTIFIER WITH RAIL-TO-GROUND OUTPUT SWING Since the LMV931-N/LMV932-N/LMV934-N input common mode range includes both positive and negative supply rails and the output can also swing to either supply, achieving half-wave rectifier functions in either direction is an easy task. All that is needed are two external resistors; there is no need for diodes or matched resistors. The half wave rectifier can have either positive or negative going outputs, depending on the way the circuit is arranged. In Figure 30 the circuit is referenced to ground, while in Figure 31 the circuit is biased to the positive supply. These configurations implement the half wave rectifier since the LMV931-N/LMV932-N/LMV934-N can not respond to one-half of the incoming waveform. It can not respond to one-half of the incoming because the amplifier can not swing the output beyond either rail therefore the output disengages during this half cycle. During the other half cycle, however, the amplifier achieves a half wave that can have a peak equal to the total supply voltage. RI should be large enough not to load the LMV931-N/LMV932-N/LMV934-N. Figure 30. Half-Wave Rectifier with Rail-To-Ground Output Swing Referenced to Ground 16 Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 Figure 31. Half-Wave Rectifier with Negative-Going Output Referenced to VCC INSTRUMENTATION AMPLIFIER WITH RAIL-TO-RAIL INPUT AND OUTPUT Some manufactures make a non-"rail-to-rail"-op amp rail-to-rail by using a resistive divider on the inputs. The resistors divide the input voltage to get a rail-to-rail input range. The problem with this method is that it also divides the signal, so in order to get the obtained gain, the amplifier must have a higher closed loop gain. This raises the noise and drift by the internal gain factor and lowers the input impedance. Any mismatch in these precision resistors reduces the CMRR as well. The LMV931-N/LMV932-N/LMV934-N is rail-to-rail and therefore doesn't have these disadvantages. Using three of the LMV931-N/LMV932-N/LMV934-N amplifiers, an instrumentation amplifier with rail-to-rail inputs and outputs can be made as shown in Figure 32. In this example, amplifiers on the left side act as buffers to the differential stage. These buffers assure that the input impedance is very high and require no precision matched resistors in the input stage. They also assure that the difference amp is driven from a voltage source. This is necessary to maintain the CMRR set by the matching R1-R2 with R3-R4. The gain is set by the ratio of R2/R1 and R3 should equal R1 and R4 equal R2. With both rail-torail input and output ranges, the input and output are only limited by the supply voltages. Remember that even with rail-to-rail outputs, the output can not swing past the supplies so the combined common mode voltages plus the signal should not be greater that the supplies or limiting will occur. For additional applications, see Texas Instruments application notes AN-29 (SNOA625), AN-31 (SNLA140), AN-71 (SNOA652), and AN-127 (SNVA516). Figure 32. Rail-to-rail Instrumentation Amplifier Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 17 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 www.ti.com Simplified Schematic 18 Submit Documentation Feedback Copyright (c) 2001-2013, Texas Instruments Incorporated Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1 LMV934-N, LMV934-N-Q1 www.ti.com SNOS993M - NOVEMBER 2001 - REVISED NOVEMBER 2013 REVISION HISTORY Changes from Revision L (MARCH 2013) to Revision M Page * Added NEW Q VERSIONS ................................................................................................................................................... 1 * Added NEW LIST ITEM ........................................................................................................................................................ 1 * Added Output Swing for Q-Grade in all Electrical Tables .................................................................................................... 3 * Added Output Swing for Q-Grade in all Electrical Tables .................................................................................................... 4 Copyright (c) 2001-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1 19 PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LMV931MF NRND SOT-23 DBV 5 1000 TBD Call TI Call TI -40 to 125 A79A LMV931MF/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A79A LMV931MFX NRND SOT-23 DBV 5 3000 TBD Call TI Call TI -40 to 125 A79A LMV931MFX/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A79A LMV931MG NRND SC70 DCK 5 1000 TBD Call TI Call TI -40 to 125 A74 LMV931MG/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A74 LMV931MGX/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A74 LMV931Q1MF/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 ALAA LMV931Q1MFX/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 ALAA LMV931Q1MG/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 BBA LMV931Q1MGX/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 BBA LMV932MA NRND SOIC D 8 95 TBD Call TI Call TI -40 to 125 LMV9 32MA LMV932MA/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV9 32MA LMV932MAX NRND SOIC D 8 2500 TBD Call TI Call TI -40 to 125 LMV9 32MA LMV932MAX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV9 32MA LMV932MM NRND VSSOP DGK 8 1000 TBD Call TI Call TI -40 to 125 A86A LMV932MM/NOPB ACTIVE VSSOP DGK 8 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A86A LMV932MMX/NOPB ACTIVE VSSOP DGK 8 3500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 A86A LMV932Q1MA/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV93 2Q1MA Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2013 Orderable Device Status (1) LMV932Q1MAX/NOPB Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV93 2Q1MA (4/5) ACTIVE SOIC D 8 2500 LMV934MA NRND SOIC D 14 55 TBD Call TI Call TI -40 to 125 LMV934MA LMV934MA/NOPB ACTIVE SOIC D 14 55 Green (RoHS & no Sb/Br) SN | CU SN Level-1-260C-UNLIM -40 to 125 LMV934MA LMV934MAX NRND SOIC D 14 2500 TBD Call TI Call TI -40 to 125 LMV934MA LMV934MAX/NOPB ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) SN | CU SN Level-1-260C-UNLIM -40 to 125 LMV934MA LMV934MT/NOPB ACTIVE TSSOP PW 14 94 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV93 4MT LMV934MTX NRND TSSOP PW 14 2500 TBD Call TI Call TI -40 to 125 LMV93 4MT LMV934MTX/NOPB ACTIVE TSSOP PW 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LMV93 4MT LMV934Q1MA/NOPB PREVIEW SOIC D 14 TBD Call TI Call TI -40 to 125 LMV934Q1MT/NOPB PREVIEW TSSOP PW 14 TBD Call TI Call TI -40 to 125 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2013 (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1, LMV934-N, LMV934-N-Q1 : * Catalog: LMV931-N, LMV932-N, LMV934-N * Automotive: LMV931-N-Q1, LMV932-N-Q1, LMV934-N-Q1 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 21-Nov-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LMV931MF SOT-23 DBV 5 1000 178.0 8.4 LMV931MF/NOPB SOT-23 DBV 5 1000 178.0 LMV931MFX SOT-23 DBV 5 3000 178.0 LMV931MFX/NOPB SOT-23 DBV 5 3000 LMV931MG SC70 DCK 5 W Pin1 (mm) Quadrant 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LMV931MG/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LMV931MGX/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LMV931Q1MF/NOPB SOT-23 DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMV931Q1MFX/NOPB SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LMV931Q1MG/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LMV931Q1MGX/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LMV932MAX SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LMV932MAX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LMV932MM VSSOP DGK 8 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 LMV932MM/NOPB VSSOP DGK 8 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 LMV932MMX/NOPB VSSOP DGK 8 3500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 LMV932Q1MAX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LMV934MAX SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 21-Nov-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMV934MAX/NOPB SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 LMV934MTX TSSOP PW 14 2500 330.0 12.4 6.95 8.3 1.6 8.0 12.0 Q1 LMV934MTX/NOPB TSSOP PW 14 2500 330.0 12.4 6.95 8.3 1.6 8.0 12.0 Q1 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMV931MF SOT-23 DBV 5 1000 210.0 185.0 35.0 LMV931MF/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LMV931MFX SOT-23 DBV 5 3000 210.0 185.0 35.0 LMV931MFX/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LMV931MG SC70 DCK 5 1000 210.0 185.0 35.0 LMV931MG/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LMV931MGX/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LMV931Q1MF/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LMV931Q1MFX/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LMV931Q1MG/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LMV931Q1MGX/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LMV932MAX SOIC D 8 2500 367.0 367.0 35.0 LMV932MAX/NOPB SOIC D 8 2500 367.0 367.0 35.0 LMV932MM VSSOP DGK 8 1000 210.0 185.0 35.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 21-Nov-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMV932MM/NOPB VSSOP DGK 8 1000 210.0 185.0 35.0 LMV932MMX/NOPB VSSOP DGK 8 3500 367.0 367.0 35.0 LMV932Q1MAX/NOPB SOIC D 8 2500 367.0 367.0 35.0 LMV934MAX SOIC D 14 2500 367.0 367.0 35.0 LMV934MAX/NOPB SOIC D 14 2500 367.0 367.0 35.0 LMV934MTX TSSOP PW 14 2500 367.0 367.0 35.0 LMV934MTX/NOPB TSSOP PW 14 2500 367.0 367.0 35.0 Pack Materials-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated