FCT CONNECTOR 1.0mm pitch/Disconnectable connectors for flat cables Specifications ------------------- This connector realizes high cost performance, to be designed with the new connector concept that the conductors of flat cable that was fixed up in the plug housing are directly touched to the base contacts. * Countermeasure to short circuit by whisker * High reliability design by both side contact * Low insertion force * With secure locking device * Current rating: 1.0A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Recommended applicable FFC: Conductor pitch/1.0mm Conductor width/0.6mm Conductor thickness/0.1mm Thickness with insulator/0.4mm * PC board mounting direction: Top entry * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. PC board layout (viewed from component side) and Assembly layout 3.0 0.03 0.03 Note2 3.0 0.03 10.1 2.7 0.03 14.2 1.275 0.03 P1.0 +0.1 1.4 0 Circuit No.1 Header outline 0.85 A +0.1 0 0.05 Note: 1. Dimension A in the above figure is the same as the dimensions A of the shrouded header. 2. Protrusion (narrow line part): The outline of the lock protrusion (operation part) of plug for mating connector is shown. 3. Tolerances are non-cumulative: 0.05mm for all centers. 4. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 FCT CONNECTOR Shrouded header <26, 34, 40 circuits> Circuits 26 B 34 Circuit No.1 mark A 40 9.6 1.0 60 Dimensions (mm) A B Q'ty / box 25.0 33.0 1,008 33.0 41.0 784 39.0 47.0 672 59.0 67.0 448 11.8 Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PBT, UL94V-0, natural (white) 3.65 3.0 Model No. With boss Without boss 26FCT-TDSS-B 26FCT-TDSS 34FCT-TDSS-B 34FCT-TDSS 40FCT-TDSS-B 40FCT-TDSS 60FCT-TDSS-B 60FCT-TDSS RoHS compliance This product displays (LF)(SN) on a label. 1.275 2.7 2.775 <60 circuits> B Circuit No.1 mark A 9.6 3.65 11.8 1.0 3.0 1.275 2.7 2.775 Cable holder <26, 34, 40, 60 circuits> 5.0 4.5 Circuits Model No. 26 FCTH-26V-K FCTH-34V-K FCTH-40V-K FCTH-60V-K 34 11.7 40 A B 60 Dimensions (mm) A B Q'ty / box 25.0 31.3 5,000 33.0 39.3 4,000 39.0 45.3 3,000 59.0 65.3 2,000 Material 1.0 PA 66, UL94V-0, black RoHS compliance Plug for mating connector <26, 34, 40 circuits> Circuit No.1 mark 10.1 B Circuits Model No. 26 FCTP-26V-S FCTP-34V-S FCTP-40V-S FCTP-60V-S 34 60 12.5 10.3 6.7 40 Dimensions (mm) A B Q'ty / box 31.3 33.0 2,000 39.3 41.0 2,000 45.3 47.0 2,000 65.3 67.0 1,200 Material PA 66, UL94V-0, natural (white) A RoHS compliance <60 circuits> Circuit No.1 mark 10.3 6.7 12.5 10.1 B A 2 FCT CONNECTOR Dimensions of recommended applicable flat cable 0.5 Insulator t0.4 Strip length17.35 Cutting sheath Insulator (Cutting sheath) Insulator Conductor Insulator (Sheath) Wn 0.1 0.05 P1.0 0.5 Conductor width 0.6 0.03 Conductor t0.1 0.1 Sheath length4.5 APXn-1 0.5 Harness assembly jig Jig name Cable bending jig Jig for flat cable Conductor forced-bending jig Plug inserting jig 3 0.1 Model No. H-VD-FCT60 H-IT-FCT60 0.02 Circuits(n) A W 26 25.0 26.0 34 33.0 34.0 40 39.0 40.0 60 59.0 60.0 Note: Confirm the applicability of the connector with the flat cable used, before use. Contact JST for applicable flat cable.