Photomos / 1 FORM A Solid State Relays Model Number Parameters Input Characteristics PLA110L PLA110 Sym. Test Conditions Units LED Forward Current - Turn on IFon IL = 100mA, t = 10ms mADC Max Typ LED Forward Current - Turn off IFoff IL = 0.2mA, VL = (Note 1) mADC Min Typ mADC Min Max Recommended Forward Current LED Forward Voltage IF VF IF = 20mA LCA110L LCA120L PLA134 1 Form A 1 Form A 1 Form A 1 Form A PLA140 1 Form A 1 Form A Max 5.0 2.0 0.1 1.8 10 30 1.1 1.4 5.0 2.0 0.1 1.8 10 30 1.1 1.4 5.0 2.0 0.1 1.8 10 30 1.1 1.4 5.0 2.0 0.1 1.8 10 30 1.1 1.4 5.0 2.0 0.1 1.8 10 30 1.1 1.4 5.0 2.0 0.1 1.8 10 30 1.1 1.4 Max 50 50 50 50 50 50 Max 10 10 10 10 10 10 V PEAK Max 400 400 400 250 150 400 150 250 380 540 24 6 0.5 5000 200 0.5 1 5.0 1.0 95 10 0.2 150 250 n/a n/a 18 4.5 0.5 5000 200 0.5 1 5.0 1.0 95 10 0.2 120 200 380 540 35 8.75 0.5 5000 200 0.5 1 5.0 1.0 60 7 0.2 150 250 380 760 18 4.5 0.5 5000 200 0.5 1 5.0 1.0 110 15 0.2 450 900 n/a n/a 5 1.25 0.5 5000 200 0.5 1 5.0* 1.0 170 30 0.2 225 425 n/a n/a 9 2.25 0.5 5000 200 0.5 1 5.0 1.0 225 10 0.2 3750 0.8 500 3750 0.8 500 3750 0.8 500 3750 0.8 500 3750 0.8 600 3750 1.1 600 VDC Min Maximum Input Ratings LED Forward Current IF LED Reverse Voltage Withstand VR IR = 10mA Switching Voltage VL IL = 50mA Switching Current: AC Mode(Note2) IL Switching Current: DC Mode(Note2) Current Limit: AC Mode(Note2) Current Limit: DC Mode(Note2) On Resistance: AC Mode(Note2) On Resistance: DC Mode(Note2) IL mADC Output Characteristics Off State Resistance mA Max mA Max Typ ILmt IF = 5mA, t = 5ms mA ILmt IF = 5mA, t = 5ms mA Typ Ron IF = 5mA, IL = 50mA Max Ron IF = 5mA, IL = 50mA Max Roff IF = 0mA, VL = 100V G Min Typ Ioff IF = 0mA, VL = 100V nA Ioff IF = 0mA, VL = Max mA Max Typ Max Ton IF = 5mA, IL = 50mA ms Max Toff IF = 5mA, IL = 50mA ms Max IF = 0mA, VL = 1V pF Typ IF = 0mA, VL = 50V pF Typ IF = 5mA mV Typ t = 60sec VRMS Min pF Typ mW Max Off State Leakage Turn On Time Turn Off Time Pin 4 to Pin 6 Pins 5(-) to Pins 4&6 (+) Capacitance - Across Output Thermal Offset Voltage General Characteristics Dielectric Strength - Input to Output Capacitance - Input to Output Power Dissipation Notes: PDiss 1: VL for LED Forward Current - Turn Off is 50 Volts less than "Switching Voltage : Max". 2: See "AC Mode and DC Mode Operation" on Page 67 for further description of AC and DC Mode. Schematic Top View: 3: Specifications subject to change without notice. Mold mark on top of relay indicates Pin #1 * I F = 10mA For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Page 1 of 2 MOSFET Breakdown Voltage (Volts) Photomos / 1 FORM A Load Current (mA) 300 250 I(F) = 5 mA 200 150 100 PLA110L PLA110 LCA120L 50 LCA110L PLA134 PLA140 450 PLA110L PLA110 LCA110L PLA140 LCA120L 400 350 I(F) = 0 mA PLA134 300 250 0 200 -40 -20 0 20 40 60 80 -40 -20 0 20 Temperature (Deg. C) 40 60 80 Temperature (Deg. C) A. Load Current vs. Ambient Temperature B. Output MOSFET BV vs. Ambient Temperature 250 LCA110L PLA110L PLA110 LCA120L PLA140 50% 30% LCA120L 200 LCA110L CapacitanceF) ( Change in On Resistance (%) Normalized to 25 C 70% PLA134 10% -10% I(F) = 5 mA I(L) = 50 mA -30% 150 50 0 -40 -20 0 20 40 Temperature (Deg. C) 60 0 80 250% 200% 150% Change in Turn Off Time (% ) Normalized to 25 C 115% PLA110L PLA110 LCA110L LCA120L PLA140 I(F) = 5 mA I(L) = 50 mA LCA120L 100% PLA134 50% 40 60 80 100 120 D. Output Capacitance vs. Applied Voltage 350% 300% 20 Bias Voltage (Volts) C. On-Resistance vs. Ambient Temperature Change in Turn On Time (%) Normalized to 25 C PLA110L PLA110 LCA120L PLA134 100 -50% 0% PLA110L PLA110 LCA120L PLA140 LCA110L PLA134 95% 75% 55% 35% 15% -5% I(F) = 5 mA I(L) = 50 mA -25% -45% -50% -65% -100% -40 -20 0 20 40 60 -40 80 -20 0 Temperature (Deg. C) 20 40 60 80 Temperature (Deg. C) F. Turn Off Time vs. Ambient Temperature E. On Time vs. Ambient Temperature 90 8000 PLA110L PLA110 PLA140 LCA110L LCA120L PLA134 T = 25 deg. C I(L) = 50 mA 6000 5000 4000 80 Turn Off Time (Sec. ) 7000 Turn On Time ( Sec.) PLA140 I(F) = 0 mA f = 1 MHz T= 25 deg. C 3000 2000 T = 25 deg. C I(L) = 50 mA 70 60 PLA110L PLA110 PLA140 LCA110L LCA120L PLA134 50 40 1000 30 0 0 5 10 15 20 25 30 35 40 45 50 55 LED Forward Current (mA) G. Turn On Time vs. LED Forward Current For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com 0 5 10 15 20 25 30 35 40 45 50 55 LED Forward Current (mA) H. Turn Off Time vs. LED Forward Current UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Page 2 of 2