MAXIMUM RATINGS — continued (TA = 25°C unless otherwise noted)
Rating Symbol Value Unit
TOTAL DEVICE
Input–Output Isolation Voltage(1,2)
(60 Hz, 1.0 sec. duration) VISO 3000 Vac(rms)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°CPD250
2.94 mW
mW/°C
Ambient Operating Temperature Range(3) TA–45 to +100 °C
Storage Temperature Range(3) Tstg –45 to +125 °C
Lead Soldering Temperature (1/16² from case, 10 sec. duration) — 260 °C
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(4)
Characteristic Symbol Min Typ(4) Max Unit
INPUT LED
Forward Voltage (IF = 10 mA) VF— 1.15 1.5 V
Reverse Leakage Current (VR = 6.0 V) IR— 0.1 100 A
Capacitance C — 18 — pF
OUTPUT TRANSISTOR
Collector–Emitter Dark Current (VCE = 10 V, TA = 25°C) ICEO1 — 1.0 50 nA
(VCE = 10 V, TA = 100°C) ICEO2 — 1.0 — mA
Collector–Emitter Breakdown Voltage (IC = 100 mA) V(BR)CEO 30 90 — V
Emitter–Collector Breakdown Voltage (IE = 100 mA) V(BR)ECO 7.0 7.8 — V
Collector–Emitter Capacitance (f = 1.0 MHz, VCE = 0) CCE —7.0 — pF
COUPLED
Output Collector Current MOC211
(IF = 10 mA, VCE = 10 V) MOC212
MOC213
IC (CTR)(5) 2.0 (20)
5.0 (50)
10 (100)
6.5 (65)
9.0 (90)
14 (140)
—
—
—
mA (%)
Collector–Emitter Saturation Voltage (IC = 2.0 mA, IF = 10 mA) VCE(sat) — 0.15 0.4 V
Turn–On Time (IC = 2.0 mA, VCC = 10 V, RL = 100 W) ton —7.5 — ms
Turn–Off Time (IC = 2.0 mA, VCC = 10 V, RL = 100 W) toff —5.7 — ms
Rise Time (IC = 2.0 mA, VCC = 10 V, RL = 100 W) tr— 3.2 — ms
Fall Time (IC = 2.0 mA, VCC = 10 V, RL = 100 W) tf— 4.7 — ms
Input–Output Isolation Voltage (f = 60 Hz, t = 1.0 sec.)(1,2) VISO 3000 — — Vac(rms)
Isolation Resistance (VI–O = 500 V)(2) RISO 1011 — — W
Isolation Capacitance (VI–O = 0, f = 1.0 MHz)(2) CISO —0.2 — pF
1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.
2. For this test, pins 1 and 2 are common, and pins 5, 6 and 7 are common.
3. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
4. Always design to the specified minimum/maximum electrical limits (where applicable).
5. Current Transfer Ratio (CTR) = IC/IF x 100%.