American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel PACKAGE OUTLINES RECOMMEND PAD LAYOUT NOTES: 1. All dimensions are in millimeters tolerance is 0.1mm unless otherwise noted; Angle0.5. Unit=mm. Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 1 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel Part Number Material L233LWD-TR InGaN/GaN Lens Color Emitted Lens White Yellow Diffused ABSOLUTE MAXIMUM RATINGS Parameter (Ta=25C) Symbol Ratings Unit Power Dissipation PD 120 mW Peak Forward Current (Duty 1/10@10KHz) Ifp 100 mA Forward Current If 30 mA Reverse Current @ 5V Ir 50 A Electrostatic Discharge ESD 500 V Operating temperature range Topr -40~+80 C Storage temperature range Tstg -40~+100 C OPTICAL-ELECTRICAL CHARACTERISTICS Parameter Luminous Intensity Symbol Test Condition (Ta=25C) Min Typ Max Unit Iv 1600 1900 -- mcd X 0.287 -- 0.311 -- 0.276 -- 0.315 -- Vf 2.8 -- 3.6 V 2 1/2 -- 115 -- Deg Chromaticity Coordinates Y Forward Voltage Viewing angle IF=20mA Note: 1. The forward voltage data did not include 0.1V testing tolerance. 2. The luminous intensity data did not include 15% testing tolerance. 3. The color coordinates measurement allowance is 0.01 testing tolerance. Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 2 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel LUMINOUS INTENSITY CLASSIFICATION BIN CODE Iv(mcd) @ 20mA Min. Max. W25W31 1600 1700 W32W33 1700 1800 W34W35 1800 1900 W36W37 1900 2000 X11X12 2000 2100 FORWARD VOLTAGE CLASSIFICATION BIN CODE Vf(V) @ 20mA Min. Max. 1 2.8 2.9 2 2.9 3.0 3 3.0 3.1 4 3.1 3.2 5 3.2 3.3 6 3.3 3.4 7 3.4 3.5 8 3.5 3.6 Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 3 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel CHROMATICITY COORDINATES SPECIFICATIONS FOR BIN GRADING CIE CHROMATICITY DIAGRAM Y X Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 4 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 5 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel CARRIER TAPE DIMENSION Note: The tolerances unless mentioned are 0.1mm, Angle 0.5; Unit=mm REEL DIMENSIONS Notes: 1. 3000 pieces per reel. Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 6 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel RECOMMENDED SOLDERING CONDITIONS 1. Hand Solder Basic spec is 280C 3 sec one time only. 2. Wave Solder 3. PB-Free Reflow Solder Notes: 1. Reflow soldering should not be done more than two times. 2. When soldering, do not put stress on the LEDs during heating. 3. After soldering, do not warp the circuit board. Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 7 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel PRECAUTIONS FOR USE Storage Time: 1. The operation of temperatures and RH are: 5C~35C, RH60%. 2. Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year (from production date). 3. If opened more than one week in an atmosphere 5C~35C, RH60%, they should be treated at 60C5C for 15hrs. Drive Method: LED is a current operated device, and therefore, require some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in a series with the LED. Consider worst case voltage variations that could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or antielectrostatic glove is recommended when handling these LEDs. All devices and machinery must be properly grounded. Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 8 American Opto Plus LED Corp. L233LWD-TR 2.8 x 0.8 x 1.2 Right Angle White SMD, Tape and Reel RELIABILITY TEST: (1) Test items and results Endurance Test Classification Test Item Test Conditions Number of Damaged Operating Life Test 1. Ta=under room temperature as per data sheet maximum rating 2. If=20mA 3. t=1000 hrs 0/22 1. Ta=105C5C 2. t=500 hrs 0/22 1. Ta=40C5C 2. t=1000 hrs 0/22 High Temperature Storage Test Low Temperature Storage Test High Temperature High Humidity Environmental Test Storage Test Thermal Shock Test 1. IR-Reflow in-board, 2 times 2. Ta=85C5C 3. RH=90%~95% 4. t=500hrs2hrs 1. IR-Reflow in-board, 2 times 2. Ta=105C5C & -40C5C (30min) (30min) 3. Total 100 cycles 0/22 0/22 1. Tsol=260C5C Reflow Soldering Test 2. Dwell time = 10 max 0/22 1. 105C ~ 25C ~ -40C 30 mins 15 mins 30 mins Temperature Cycling 2. 100 cycles 0/22 (2) Criteria for judging the damage Item Symbol Test Conditions Criteria for Judgement Min. Max. Forward Voltage Vf If=20mA -- U.S.L. x 1.2 Reverse Current Ir Vr=5V -- U.S.L. x 2.0 Luminous Intensity Iv If=20mA L.S.L. x 0.5 -- Note: 1. U.S.L.: Upper Standard Level. 2. L.S.L: Lower Standard Level Version 1.0 Date: 10-29-2012 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave. , Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 9