CYStech Electronics Corp. Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 1/3 1.0Amp. Surface Mount Fast Recovery Diodes CFR10XSA Series Features * For surface mounted applications. * Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 * Low leakage current * High surge capability * High temperature soldering: 250C/10 seconds at terminals * Exceeds environmental standards of MIL-S-19500/228 Mechanical Data * Case: Molded plastic, SMA/JEDEC DO-214AC * Terminals: Solder plated, solderable per MIL-STD-750 method 2026 * Polarity: Indicated by cathode band. * Packaging: 12mm tape per EIA STD RS-481. * Weight: 0.064 gram, 0.002 ounce Maximum Ratings and Electrical Characteristics (Rating at 25C ambient temperature unless otherwise specified. ) Parameter Repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum instantaneous forward voltage, IF=1A (Note 1) Reverse Recovery Time Average forward rectified current @TA=55 Peak forward surge current @8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum DC reverse current VR=VRRM,TA=25(Note 1) VR=VRRM,TA=100(Note 1) Maximum thermal resistance, Junction to ambient Diode junction capacitance (Note 2) Storage temperature Operating temperature VRRM VRMS VR CFR 101 50 35 50 CFR 102 100 70 100 CFR 103 200 140 200 Type CFR 104 400 280 400 VF 1.3 1.3 1.3 1.3 1.3 1.3 1.3 V trr 150 150 150 150 250 500 500 ns Symbol CFR 105 600 420 600 CFR 106 800 560 800 CFR 107 1000 700 1000 Units V V V IO 1 A IFSM 30 A IR 5 100 A A Rth,JA 32 (typ) /W CJ Tstg TJ 15 (typ) -55 ~ +150 -55 ~ +150 pF Notes : 1. Pulse test, pulse width=300sec, 2% duty cycle 2 . f=1MHz and applied 4.0VDC reverse voltage. CFR10XSA CYStek Product Specification Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 2/3 CYStech Electronics Corp. Characteristic Curves Forward Current vs Forward Voltage Forward Current Derating Curve 100 1 Forward Current---I F(A) Average Forward Current---I O(A) 1.2 0.8 0.6 Single Phase, Half Wave 60Hz, Resistive or Inductive Load 0.4 0.2 10 1 Tj=25 Pulse Width=300s Duty Cycle=1% 0.1 0.01 0 0 20 40 60 80 100 120 140 0.6 160 Ambient Temperature---TA() 1.2 1.4 1.6 1.8 2 Junction Capacitance vs Reverse Voltage 40 40 Junction Capacitance---C J(pF) Peak Forward Surge Current--IFSM (A) 1 Forward Voltage---VF(V) Maximum Non-Repetitive Forward Surge Current 30 Tj=25, 8.3ms Single Half Sine Wave, JEDEC method 20 10 35 30 25 20 15 10 5 0 0 1 10 Numbers of Cycles at 60Hz CFR10XSA 0.8 100 0.01 0.1 1 10 100 Reverse Voltage---VR(V) CYStek Product Specification CYStech Electronics Corp. Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 3/3 SMA/DO-214AC Dimension Marking Code: Device CFR 101 CFR 102 CFR 103 CFR 104 Code F11 F12 F13 F14 Device CFR 105 CFR 106 CRF 107 Code F15 F16 F17 SMA Plastic Surface Mounted Package CYStek Package Code:SA *:Typical Inches Min. Max. 0.177 0.185 0.094 0.110 0.012(typ) 0.150 0.165 DIM A B C D Millimeters Min. Max. 4.4 4.8 2.4 2.8 0.3(typ) 3.8 4.2 DIM E F G - Inches Min. Max. 0.060 0.067 0.04(typ) 0.04(typ) - Millimeters Min. Max. 1.5 1.7 1.0(typ) 1.0(typ) - Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material : * Lead : 42 Alloy ; solder plating * Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice: * All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. * CYStek reserves the right to make changes to its products without notice. * CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. * CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. CFR10XSA CYStek Product Specification