MBR10/15/25/35/50A W SERIES REVERSE VOLTAGE FORWARD CURRENT SILICON BRIDGE RECTIFIERS - 50 to 1000Volts - 10/15/25/35/50 Amperes MBRW FEATURES METAL HEAT SINK Surge overload -240~500 amperes peak Low forward voltage drop .335(8.5) .295(7.5) Mounting position: Any Electrically isolated base -2000 Volts 1.200 (30.5)MIN Solderable 0.25" FASTON terminals Materials used carries U/L recognition .42(1.07) .38(0.97) Hole for No.8 screw 193"(4.9)diam 1.130(28.7) 1.114(28.3) 1.130(28.7) 1.114(28.3) .732(18.6) .693(17.6) .469(11.9) .429(10.9) .732(18.6) .693(17.6) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 ambient temperature unless otherwise specified. Resistive or inductive load 60HZ. For capacitive load current by 20% CHARACTERISTICS SYMBOL MBR-W MBR-W MBR-W MBR-W MBR-W MBR-W MBR-W 10005 1001 1002 1004 1006 1008 1010 15005 1501 1502 1504 1506 1508 1510 25005 2501 2502 2504 2506 2508 2510 35005 3501 3502 3504 3506 3508 3510 50005 5001 5002 5004 5006 5008 5010 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 30 70 140 280 420 560 700 V Maximum Average Forward Rectified Output Current at @Tc=55 I(AV) Peak Forward Surage Current IFSM 8.3ms Single Half Sine-Wave 10 MBR 10W 240 25 15 MBR 15W MBR 25W 300 35 MBR 35W 400 400 MBR 50W 50 A 500 A Super Imposed on Rated Load Maximum Forward Voltage Drop Per Element at 5.0/7.5/12.5/17./25.0 Peak Maximum Reverse Current at Rated DC Blocking Voltage Per Element Operating Temperature Rang Storage Temperature Rang @TA=25 VF 1.1 V IR 10.0 uA TJ -55 to +125 TSTG -55 to +125 ~ 371 ~ RATING AND CHARACTERISTIC CURVES MBR10/15/25/35/50A W SERIES FIG. 2 - DERATING CURVE OUTPUT RECTIFIED CURRENT FIG.1-MAXIMUM FORWARD SURGE CURRENT 50 600 MBR50W AVERAGE FORWARD OUTPUT CURRENT (AMPERES) PEAK FORWARD SURGE CURRENT , AMPERES MBR50W 500 MBR25/35W 400 MBR15W 300 200 100 MBR10W 0 1 10 40 MBR35W 30 MBR25W 20 MBR15W 10 MBR10W 100 0 100 50 NUMBER OF CYCLES AT 60Hz 150 TEMPERATURE () FIG.3 - TYPICAL FORWARD CHARACTERISTICS MBR35/50W FIG.4 - TYPICAL REVERSE CHARACTERISTICS MBR15W 100 MBR25W 10 INSTANTANEOUS REVERSE CURRENT, (MICROAMPERES) INSTANTANEOUS FORWARD CURRENT (AMPERES) MBR10W 10 1.0 0.1 1.0 T J = 25 0.1 0.01 0.01 0 0.4 0.6 0.8 1.0 1.2 1.4 20 40 60 80 100 120 140 1.6 PERCENT OF RATED PEAK REVERSE VOLTAGE INSTANTANEOUS FORWARD VOLTAGE ,VOLTS ~ 372 ~