SPECIFICATION * Samsung P/N : CL10F223ZB8NNND , -20/+80%, 50V, Y5V, 0603 * Descriptiont : CAP, 22 * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance CL 10 F 223 Z B 8 N N N D Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.6 0.1 22 -20/+80 % 0.8 0.1 mm mm Ni Cu Sn 100% Plating 50 V 0.8 0.1 W: Inner electrode Termination Y5V Rated Voltage Thickness mm (Pb Free) Product Special Normal Packaging Cardboard Type, 13" reel Reserved for future use B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature Y5V Characterisitcs Adhesive Strength (From -30 to 85, Capacitance change shoud be within -82~+22%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.05 max. within 30% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 20% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 20% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours x 3 direction (x, y, z) With rated voltage Resistance Tan : IR : 0.09 max 402, 90~95%RH, 500+12/-0hrs 500Mohm or 25Mohm Whichever is Smaller High Temperature Capacitance change : Resistance Tan : IR : within 30% within 30% 0.09 max Capacitance change : Cycling Tan , IR : initial spec. of the rated voltage Max. operating temperature 1000Mohm or 50Mohm Whichever is Smaller Temperature With 200% within 20% 1000+48/-0hrs 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.