KOA SPEER ELECTRONICS, INC. SS-219 R5 Multi Layer Ferrite Chip Beads Type MCB CERTIFIED 1. General Designed to reduce noise at high frequencies Standard EIA Packages: 0402, 0603, 0805, 1206 Nickel barrier with solder overcoat for excellent solderability Magnetically shielded 2. 2.1 Dimensions Table 1 W L Part 0402 H Terminations (metalization bands) L P 0.0390.004 (1.000.10) 0.0200.004 (0.500.10) 0.0200.004 (0.500.10) 0.0100.004 (0.250.10) 0603 0.0630.006 (1.600.15) 0.0310.006 (0.800.15) 0.0310.006 (0.800.15) 0.0140.006 (0.360.15) 0805 0.0790.008 (2.000.20) 0.0490.008 (1.250.20) 0.0350.008 (0.900.20) 0.0200.010 (0.510.25) 1206 0.1260.008 (3.200.20) 0.0630.008 (1.600.20) 0.0430.008 (1.100.20) 0.0200.010 (0.510.25) P Solder Dimensions - inches (mm) W H Nickel Silver Metalization Electrodes 3. Ordering and Specifying Information* MCB 0603 G TE 500 J Type Size Material Packaging Impedance Tolerance 0402 0603 0805 1206 Permability Code: F G S L P Bolivar Drive P.O. Box 547 TE: 7" Embossed Plastic 2 Significant Figure TED: 13" Embossed + 1 Multiplier Plastic Example: 500 = 50 None: Bulk * Please note: KSE's part numbers do not contain any spaces or hyphens. Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 J:5% K:10% M:20% P:25% PAGE 1 OF 8 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 4. Standard Applications Allowable DC Current (mA) Impedance @ 100MHz Maximum DC Resistance MCB0402GTE100* MCB0402GTE150* MCB0402GTE700* MCB0402GTE121* MCB0402GTE221* MCB0402GTE601* MCB0402GTE102* MCB0603GTE300* MCB0603GTE400* MCB0603GTE600* MCB0603GTE750* MCB0603GTE800* MCB0603GTE900* MCB0603GTE101* MCB0603GTE121* MCB0603GTE141* MCB0603GTE151* MCB0603GTE181* MCB0603GTE221* MCB0603GTE301* MCB0603GTE421* MCB0603GTE601* MCB0603GTE102* MCB0603STE601* 10 15 70 120 220 600 1000 30 40 60 75 80 90 100 120 140 150 180 220 300 420 600 1,000 600 0.05 0.07 0.4 0.5 0.7 1.1 1.5 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.35 0.4 0.5 0.6 0.65 500 300 200 200 100 50 50 Under Development-Fall 2001 Release 400 400 300 300 300 250 -55C 250 to 250 125C 250 250 250 250 230 210 200 190 200 MCB0805FTE050* MCB0805FTE070* MCB0805FTE100* MCB0805FTE110* MCB0805FTE170* 5 7 10 11 17 0.07 0.1 0.1 0.1 0.1 600 600 600 600 600 Ordering Code Operating Temperature TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 PAGE 2 OF 8 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 4. Standard Applications (continued) Impedance @ 100MHz Ordering Code MCB0805FTE300* MCB0805FTE400* MCB0805FTE500* MCB0805FTE600* MCB0805FTE750* MCB0805FTE800* MCB0805GTE900* 30 40 50 60 75 80 90 MCB0805GTE101* MCB0805GTE121* MCB0805GTE151* MCB0805GTE181* MCB0805GTE201* MCB0805GTE301* MCB0805GTE401* MCB0805GTE421* MCB0805GTE601* MCB0805GTE751* MCB0805GTE102* MCB1206FTE190* MCB1206FTE260* MCB1206FTE300* MCB1206FTE310* MCB1206FTE500* MCB1206FTE600* MCB1206FTE700* MCB1206FTE800* MCB1206FTE900* MCB1206FTE101* MCB1206FTE121* 100 120 150 180 200 300 400 420 600 750 1,000 19 26 30 31 50 60 70 80 90 100 120 Maximum DC Resistance Allowable DC Current (mA) 0.1 0.1 0.1 0.1 0.2 0.2 0.2 600 600 600 600 400 400 400 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.2 0.2 0.2 0.2 400 200 200 200 200 200 200 200 200 200 200 600 600 600 600 600 600 200 400 400 400 300 Operating Temperature -55C to 125C TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 PAGE 3 OF 8 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 4. Standard Applications (continued) Ordering Code MCB1206FTE201* MCB1206FTE301* MCB1206FTE601* MCB1206GTE102* MCB1206GTE152* Impedance @ 100MHz Maximum DC Resistance Allowable DC Current (mA) 200 300 600 1,000 1,500 0.3 0.4 0.5 0.7 0.9 300 300 200 150 100 Operating Temperature -55C to 125C 5. Characteristics Item Requirement Conditions Operating Temperature -55C ~ +125C Storage Temperature 40C @ 70% Humidity Sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. Resistance to Solder Heat Change in Impedance: Relative to value before test 20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 150C 10C Preheat Time: 60 sec Solder Temp: 260C 5C Dip Time: 10 1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245C 5C Dip Time: 5 0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks) Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230C 5C 4) Dip Time: 5 0.5 sec 5) Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Min 1G ohms PAGE 4 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 5. Characteristics (continued) Item Requirement Conditions Solvent Resistance Change in Impedance: Relative to value before test 10%. Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Terminal Strength (push test) Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type 0402 0603 0805 1206 W(kgf) Type 0402 0603 0805 1206 W(kgf) Time N/A 30 sec 2 sec 30 sec 2 sec 30 sec 2 sec 0.5 1.0 1.5 Time N/A 60 sec 60 sec 60 sec 1.4 1.8 2.3 Bending Strength Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test 10% Board: 90x40x1.6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test 10% Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total). Vibration Impedance: Relative to initial value 10% Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz and return to 10Hz in 20 minutes (this shall constitute one cycle). Amplitude: 1.5mm The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value 20%. DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing the parts shall be allowed to cool to room temperature for 24 hours. Step 1-start 2-hold 3-transfer 4-hold 5-transfer Temperature -40C 2C -40C 2C -- +105C 2C -- Time -- 30 min 5 min 0.5 min max. 30 min 5 min 0.5 min max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. PAGE 5 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 5. Characteristics (continued) Item Requirement Conditions Load Humidity Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value 15% Temperature: 85C 2C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value 15% Temperature: 85C 2C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. 6. Packaging Specifications KOA's multilayer components are provided on tape-and-reel for use in pick-and-place machines or in bulk for special applications. Both tape-and-reel and bulk products are sealed in plastic bags with desiccant. The reel size can be 7 inch or 13 inch, depending on customers' preference. 7. Dimensions - inches (mm) Tape Ao Bo Do Ko t E 0402 0.0260.004 0.0450.004 0.0310.004 (1005) (0.650.1) (1.150.1) (0.80.1) 0603 0.0430.002 0.0750.002 0.0430.002 (1608) (1.10.1) (1.90.1) (1.10.1) P2 Po W F Bo 0805 0.0630.002 0.0930.002 0.0460.002 (2012) (1.60.1) (2.40.1) (1.20.1) 1206 0.0710.002 0.1380.002 0.0480.002 (3216) (1.80.1) (3.50.1) (1.20.1) D1 P1 Ao Ko PAGE 6 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 Tape E F W P1 Po P2 Do D1 0.0400.002 0.0790.004 0402 N/A (1.00.05) (2.00.1) (1005) 0603 (1608) 0.0690.004 0.1380.002 0.3180.002 0.1570.004 0.1570.004 0.0790.002 0.0590.004 0.039 min. 0805 (1.750.10) (3.50.005) (8.10.1) (4.00.1) (4.00.1) (2.000.05) (1.5+0.1/-0.0) (1.0 min.) (2012) 1206 (3216) t 0.0090.001 (0.230.02) 8. Chip Quantities Per Reel Chip Size Parts on 7 inch (178mm) Reel Parts on 13 inch (330mm) Reel 0402 (1005) 10,000 N/A 0603 (1608) 4,000 12,000 0805 (2012) 3,000 10,000 1206 (3216) 3,000 10,000 9. Recommended PC Board Land Patterns - mm (inches) Chip Size L G H 0402 (1005) 1.3 (0.051) 0.4 (0.016) 0.5 (0.020) 0603 (1608) 2.6 (0.102) 0.6 (0.023) 0.8 (0.031) 0805 (2012) 3.0 (0.118) 1.0 (0.039) 1.0 (0.039) G 1206 (3216) 4.4 (0.173) 2.2 (0.087) 1.4 (0.055) L H PAGE 7 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R5 10. Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. 250C Soldering 10 Seconds Max. Natural Cooling 250C 200C 150C 150C 20 Seconds Max. 60 Seconds Max. 60 Seconds Max. PAGE 8 OF 8 Bolivar Drive AHA 04/01 P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com Notice: The information contained in this Tech Note is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.