SSP1A125BDT Product datasheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications solid state relay-panel mount-thermal pad-input 3-32V DC, output 24-300V AC,25 A Main Range of product Zelio Relay Product or component type Solid state relay Provided accessory Thermal pad Device short name SSP1 Mounting support Panel Number of phases 1 phase Contacts type and conifguration 1 NO [In] rated current 25 A Solid state output type Zero voltage switching SCR output Complementary [Uc] control circuit voltage 3...32 V DC Minimum switching voltage 3 V DC turn-on Maximum switching voltage 1 V DC turn-off Response time 0.5 cycle turn-on 0.5 cycle turn-off Input current 10 mA at 12 V DC Output voltage 24...300 V AC Load current 0.15...25 A Transient overvoltage 600 V Surge current 250 A for 16.6 ms Maximum It for fusing 285 A.s for 10 ms at 50 Hz half cycle 259 A.s for 8.33 ms at 60 Hz half cycle Co-ordination type Type 1 - 25 A miniature circuit breaker (MCB) - curve B Type 2 - 20 A miniature circuit breaker (MCB) - curve B Leakage current <= 1 mA off-state Voltage drop <= 1.15 V on-state 22/06/2019 1 DV/Dt 500 V/s off-state at maximum voltage Power factor 0.5 with maximum load Motor controller rating 0.5 hp 120 V AC 1 hp 240 V AC Insulation resistance 1000 MOhm at 500 V DC Maximum capacitance 10 pF for input/output Dielectric strength 4 kV AC for input/output 4 kV AC for input or output to case [Uimp] rated impulse withstand voltage 6 kV output to case 6 kV input to output Tightening torque 1.5...1.7 N.m for input 2...2.2 N.m for output Connections - terminals Forked type tag connectors : 9.2 x 4 mm for input Ring lugs : 9.2 x 4 mm for input Forked type tag connectors : 11.7 x 4.5 mm for output Ring lugs : 11.7 x 4.5 mm for output Screw terminals : 0.2...3.3 mm, (AWG 24...AWG 12) with cable end for input Screw terminals : 0.5...5.26 mm, (AWG 20...AWG 10) with cable end for output Screw terminals : 0.2...3.3 mm, (AWG 24...AWG 12) without cable end for input Screw terminals : 0.5...8.26 mm, (AWG 20...AWG 8) without cable end for output Thermal resistance 0.8 C/W junction to case Thermal pad impedance 0.48 C-in/W at 25 psi LED indicator LED, green for input IP degree of protection IP20 Safety reliability data MTTFd = 1875.9 years B10d = 1731395 Product weight 89.2 g Environment Ambient air temperature for operation -40...80 C Ambient air temperature for storage -40...125 C Pollution degree 2 Overvoltage category III Product certifications UL RoHS REACH EAC CE CSA Marking UL EAC CSA CE Standards EN/IEC 62314 EN/IEC 60950-1 UL 508 CSA C22.2 No 14-13 Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available Product Environmental Profile End of Life Information 2 Product datasheet Dimensions Drawings SSP1A125BDT Dimensions (1) (2) (3) Front view Side view Bottom view 3 Product datasheet Performance Curves Derating Curves A: B: (1) (2) (3) Load Current (Arms) Ambient Temperature (C) For Heatsink SSRHP17 For Heatsink SSRHP25 No Heatsink 4 SSP1A125BDT