Product datasheet
Characteristics
SSP1A125BDT
solid state relay-panel mount-thermal pad-input
3-32V DC, output 24-300V AC,25 A
Main
Range of product Zelio Relay
Product or component type Solid state relay
Provided accessory Thermal pad
Device short name SSP1
Mounting support Panel
Number of phases 1 phase
Contacts type and conifguration 1 NO
[In] rated current 25 A
Solid state output type Zero voltage switching
SCR output
Complementary
[Uc] control circuit voltage 3...32 V DC
Minimum switching voltage 3 V DC turn-on
Maximum switching voltage 1 V DC turn-off
Response time 0.5 cycle turn-on
0.5 cycle turn-off
Input current 10 mA at 12 V DC
Output voltage 24...300 V AC
Load current 0.15...25 A
Transient overvoltage 600 V
Surge current 250 A for 16.6 ms
Maximum I²t for fusing 285 A².s for 10 ms at 50 Hz half cycle
259 A².s for 8.33 ms at 60 Hz half cycle
Co-ordination type Type 1 - 25 A miniature circuit breaker (MCB) - curve B
Type 2 - 20 A miniature circuit breaker (MCB) - curve B
Leakage current <= 1 mA off-state
Voltage drop <= 1.15 V on-state
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
22/06/2019
1
DV/Dt 500 V/µs off-state at maximum voltage
Power factor 0.5 with maximum load
Motor controller rating 0.5 hp 120 V AC
1 hp 240 V AC
Insulation resistance 1000 MOhm at 500 V DC
Maximum capacitance 10 pF for input/output
Dielectric strength 4 kV AC for input/output
4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage 6 kV output to case
6 kV input to output
Tightening torque 1.5...1.7 N.m for input
2...2.2 N.m for output
Connections - terminals Forked type tag connectors : 9.2 x 4 mm for input
Ring lugs : 9.2 x 4 mm for input
Forked type tag connectors : 11.7 x 4.5 mm for output
Ring lugs : 11.7 x 4.5 mm for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input
Screw terminals : 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input
Screw terminals : 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output
Thermal resistance 0.8 °C/W junction to case
Thermal pad impedance 0.48 °C-in²/W at 25 psi
LED indicator LED, green for input
IP degree of protection IP20
Safety reliability data MTTFd = 1875.9 years
B10d = 1731395
Product weight 89.2 g
Environment
Ambient air temperature for operation -40...80 °C
Ambient air temperature for storage -40...125 °C
Pollution degree 2
Overvoltage category III
Product certifications UL
RoHS
REACH
EAC
CE
CSA
Marking UL
EAC
CSA
CE
Standards EN/IEC 62314
EN/IEC 60950-1
UL 508
CSA C22.2 No 14-13
Offer Sustainability
Sustainable offer status Green Premium product
RoHS (date code: YYWW) Compliant
Schneider Electric declaration of conformity
REACh Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Product environmental profile Available
Product Environmental Profile
Product end of life instructions Available
End of Life Information
2
Product datasheet
Dimensions Drawings
SSP1A125BDT
Dimensions
(1) Front view
(2) Side view
(3) Bottom view
3
Product datasheet
Performance Curves
SSP1A125BDT
Derating Curves
A : Load Current (Arms)
B : Ambient Temperature (°C)
(1) For Heatsink SSRHP17
(2) For Heatsink SSRHP25
(3) No Heatsink
4
