SMD Power Inductors - Shielded CTEPH149 Series From 0.56 H to 2.4 H ctparts.com SPECIFICATIONS Part numbers indicate tolerance available. M = 20%, N = 30% Part Number Inductance (H) L Test Freq. (kHz) DCR Max. ) ( IDC Max. (A) CTEPH149-R56N 0.56 100 0.0010 30 CTEPH149-1R0M CTEPH149-1R6M CTEPH149-2R2M CTEPH149-2R4M 1.00 1.60 2.20 2.40 100 100 100 100 0.0012 0.0015 0.0019 0.0015 22 18 15 10 Not shown at actual size. PHYSICAL DIMENSIONS Size mm inches A B C D 14.70.3 15.00.3 9.50.3 0.580.01 0.590.01 0.370.01 4.00.3 D1 2.00.3 0.160.01 0.080.01 E F 8.00.3 4.01.0 0.310.01 0.160.04 A B H 1 1 3 E 3 2 2 F 13.5 3.0 3.0 05.27.05 Technologies 1.20.2 D1 D G Unit: mm CENTRAL 2.20.3 0.090.01 0.050.008 Marking Inductance Code PAD LAYOUT 5.0 H C XXX CHARACTERISTICS Description: SMD shielded power inductor (Ultra High Current) Applications: Excellent for power line DC-DC conversion applications used in notebook computers and other handheld electronic equipment Operating Temperature: -25C to +85C Storage Temperature: -40C to +105C Temperature rise: 40C Typical at IDC Resistance to solder heat: 260C for 10 seconds Rated Current: Based on temperature & L / L0A =25% Typ. at IDC Inductance Tolerance: 20%, 30% Testing: Tested on a HP4285A at 100 KHz , 1V Packaging: Tape & Reel Marking: Parts are marked with inductance code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. G Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice