Subminiature Basic Switch SS Economical, Subminiature Basic Switch Offers Long Life (30 x 106 Operations) Incorporating simple and stable two split springs which ensures a long service life (30,000,000 operations). A variety of models with low operating force to high operating force are available. Solder, quick-connect terminals (#110) and PCB terminals are available. Approval obtained for standards including UL, CSA, and VDE. RC Conforms to EN61058-1. 221 S+E Ordering Information Model Number Legend SS-jjjjj 1 2 3 4 5 1. Ratings 01: 0.1 A 5: 5 A 10: 10 A 4. 2. Actuator None: Pin plunger GL: Hinge lever GL13: Simulated hinge lever GL2: Hinge roller lever 5. 3. Operating Force (at Pin Plunger) None: 1.47 N {150 gf} -F: 0.49 N {50 gf} -E: 0.25 N {25 gf} Note: These values are for the pin plunger model. 114 Contact Form None: SPDT -2: SPST-NC -3: SPST-NO Terminals None: Solder Quick-connect terminals (#110) T: D: PCB Note: The PCB terminal has a right-angle terminal option. D1: Upward direction D2: Downward direction These are UL, CSA, and VDE approved. Note: When suffix "-T" is placed after the model number, the model withstands high temperatures (-25C to 125C) and is UL and CSA approved. SS SS List of Models Rating 0.1 A 0 Actuator Pin p plunger u ge PCB terminal SS-01-E SS-01-ET SS-01-ED SS-01-F SS-01-FT SS-01-FD 1.47 N {150 gf} SS-01 SS-01T SS-01D 0.08 N {8 gf} SS-01GL-E SS-01GL-ET SS-01GL-ED 0.16 N {16 gf} SS-01GL-F SS-01GL-FT SS-01GL-FD 0.49 N {50 gf} SS-01GL SS-01GLT SS-01GLD 0.08 N {8 gf} SS-01GL13-E SS-01GL13-ET SS-01GL13-ED 0.16 N {16 gf} SS-01GL13-F SS-01GL13-FT SS-01GL13-FD 0.49 N {50 gf} SS-01GL13 SS-01GL13T SS-01GL13D 0.08 N {8 gf} SS-01GL2-E SS-01GL2-ET SS-01GL2-ED 0.16 N {16 gf} SS-01GL2-F SS-01GL2-FT SS-01GL2-FD 0.49 N {50 gf} SS-01GL2 SS-01GL2T SS-01GL2D 0.49 N {50 gf} SS-5-F SS-5-FT SS-5-FD 1.47 N {150 gf} SS-5 SS-5T SS-5D 0.16 N {16 gf} SS-5GL-F SS-5GL-FT SS-5GL-FD 0.49 N {50 gf} SS-5GL SS-5GLT SS-5GLD 0.16 N {16 gf} SS-5GL13-F SS-5GL13-FT SS-5GL13-FD 0.49 N {50 gf} SS-5GL13 SS-5GL13T SS-5GL13D 0.16 N {16 gf} SS-5GL2-F SS-5GL2-FT SS-5GL2-FD 0.49 N {50 gf} SS-5GL2 SS-5GL2T SS-5GL2D Pin plunger 1.47 N {150 gf} SS-10 SS-10T SS-10D Hinge lever 0.49 N {50 gf} SS-10GL SS-10GLT SS-10GLD Simulated hinge lever 0.49 N {50 gf} SS-10GL13 SS-10GL13T SS-10GL13D Hinge roller lever 0.49 N {50 gf} SS-10GL2 SS-10GL2T SS-10GL2D Hinge ge roller o e lever e e Pin p plunger u ge Hinge ge lever e e Simulated hinge lever Hinge roller lever Note: Quick-connect terminal (#110) 0.49 N {50 gf} Simulated S u a ed hinge ge lever e e 10.1 A (see note 1) Soldering terminal 0.25 N {25 gf} Hinge ge lever e e 5 A (see note o e 1)) OF max. 1. EN61058-1 (IEC601058-1) approved by TUV Rheinland. 2. SPST models are also available, but not listed in the above table. 115 SS SS Specifications Ratings Type Rated voltage SS-10, SS-5 SS-01 Non-inductive load Resistive load NC Generalpurpose p p Note: Lamp load NO NC NO Inductive load NC NO Non-inductive load Motor load NC NO Resistive load NC NO 125 VAC 5 (10.1) A ((see note 1)) 1.5 A 0.7 A 3A 2.5 A 1.3 A 0.1 A 250 VAC 3 (10.1) A (see note 1) 1A 0.5 A 2A 1.5 A 0.8 A --- 8 VDC 5 (10.1) A (see note 1) 2A 5A 4A 3A 0.1 A 14 VDC 5 (10.1) A (see note 1) 2A 4A 4A 3A 0.1 A 30 VDC 4A 2A 3A 3A 3A 0.1 A 125 VDC 0.4 A 0.05 A 0.4 A 0.4 A 0.05 A --- 250 VDC 0.2 A 0.03 A 0.2 A 0.2 A 0.03 A --- 1. Data in parentheses apply to the SS-10 models only. 2. 3. 4. 5. 6. 7. The above values are for the steady-state current. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). Lamp load has an inrush current of 10 times the steady-state current. Motor load has an inrush current of 6 times the steady-state current. If the Switch is used in a DC circuit and is subjected to a surge, connect a surge suppressor across the Switch. The ratings values apply under the following test conditions: Ambient temperature: 202C Ambient humidity: 655% Operating frequency: 30 operations/min Voltage (V) Use the Switch within the following operating range. Operating range for micro-load models SS-01 Operating range for general-load models SS-5, SS-10 Inoperable range Current (mA) Item Minimum applicable load 116 Inductive load SS-01 1 mA at 5 VDC SS-5 SS-10 160 mA at 5 VDC SS SS Characteristics Operating speed 0.1 mm to 1 m/s (pin plunger models) Operating frequency Mechanical: 400 operations/min Electrical: 60 operations/min Insulation resistance 100 M min. (at 500 VDC) Contact resistance (initial value) OF 1.47 N {150 gf}: SS-01 models: 50 m max. SS-5, SS-10 models: 30 m max. OF 0.49 N {50 gf}: SS-01 models: SS-5 models: 100 m max. 50 m max. OF 0.25 N {25 gf}: SS-01 models: 150 m max. Dielectric strength 1,000 VAC (600 VAC for SS-01 models), 50/60 Hz for 1 min between terminals of the same polarities 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each terminal and non-current-carrying metal part (see note 1) Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Destruction: OF 1.47 N {150 gf}: OF 0.25 N {25gf}/0.49 N {50 gf}: Malfunction: OF 1.47 N {150 gf}: OF 0.25 N {25 gf}/0.49 N {50 gf}: Note: 1,000 m/s2 {approx. 100G} max. 500 m/s2 {approx. 50G} max. 300 m/s2 {approx. 30G} max. 200 m/s2 {approx. 20G} max. Lever-type model: Total travel position (with a contact separation time of 1 ms max.) Life expectancy Mechanical: 30,000,000 operations min. (Refer to the following Engineering Data.) 10,000,000 operations min. for SS-10 models Electrical: 200,000 operations min. (Refer to the following Engineering Data.) 50,000 operations min. for SS-10 models Degree of protection IP00 Degree of protection against electrical shock Class 1 Proof Tracking Index (PTI) 175 Switch category D (IEC 335-1) Ambient temperature Operating: -25C to 85C (at ambient humidity of 60% max.) (with no icing) Ambient humidity Operating: 85% max. (for 5C to 35C) Weight Approx. 1.6 g (pin plunger models) Note: 1. The dielectric strength shown in the table indicates a value for models with a Separator. 2. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel position. EN61058-1 (IEC601058-1) (TUV Rheinland, File No. J9451450) Approved Standards UL1054 (File No. E41515) CSA C22.2 No. 55 (File No. LR21642) Rated voltage SS-10 SS-5 SS-01 125 VAC --- 5A 0.1 A 250 VAC 10.1 A 3A --- 30 VDC --- --- 0.1 A 120 VAC (TV) --- 2A --- VDE0630 (File No. 6131UG) SEMKO (File No. 9812216/01), (File No. 8916091) Rated voltage 250 VAC SS-10 10 A SS-5 5A SEV (File No. 93. 5. 51936. 01) Rated voltage 250 VAC Rated voltage SS-10 SS-5 SS-01 250 VAC 10 A 5A 5 (1) A motor 3 A (see note 2) --- 125 VAC --- --- 0.1 A (see note 2) 30 VDC --- 5 A (see note 2) 0.1 A (see note 2) Note: 1. Testing conditions: 50,000 operations, T85 (0C to 85C) 2. These approvals are only limited to OF 1.47 N {150 gf} models. SS-5 5A 117 SS SS Contact Specifications Item Contact Co ac Inrush us currentt SS-10 Contact Form (SPDT) SS-5 SS-01 Specification Rivet Material Silver alloy Gap (standard value) 0.5 mm 0.25 mm NC 20 A max. 1 A max. NO 15 A max. SPDT Crossbar Silver Gold alloy 10 A max. COM 1 A max. NO NC Engineering Data Mechanical Life Expectancy (Pin Plunger Model) Electrical Life Expectancy (Pin Plunger Model) SS-5, SS-1, SS-01 Models SS-5 Models 40,000 Number of operations (x10 3) Number of operations (x10 3) 5,000 Ambient temperature: 202C Ambient humidity: 655% Without load Operating frequency: 60 operations/min 30,000 20,000 10,000 5,000 3,000 1,000 0.2 0.3 0.4 0.5 0.6 0.7 125 VAC 500 300 250 VAC 100 50 30 10 0.1 Ambient temperature: 202C Ambient humidity: 655% Operating frequency: 30 operations/min cos = 1 0 1 2 Overtravel (mm) 3 4 5 6 7 Switching current (A) Dimensions Terminals Terminal plate thickness is 0.5 mm. Quick-connect Terminal (#110) Solder Terminal 2.9 PCB Terminal 7.1 8.8 COM terminal (C) Three, 1.6-dia. holes 9.50.1 6.4 19.8 COM terminal (C) 1.6 8.8 2.8 1.6 7.3 NO terminal NC terminal 118 10.6 3.2 1.6 8.8 7.3 9.50.1 19.8 3.2 Three, 1.2 dia. NO terminal NC terminal 0.6 3.3 2.9 2.9 6.4 COM terminal (C) 7.3 0.5 1.2 9.50.1 19.8 NO terminal 3.2 t = 0.5 NC terminal 7.0 SS SS Dimensions and Operating Characteristics Note: 1. All units are in millimeters unless otherwise indicated. 2. The following illustration and drawing are for solder terminal models. Refer to page 118 for details on models with quick-connect terminals (#110) or PCB terminals. 3. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Pin Plunger 7.5 PT SS-01(-E, -F) SS-5(-F) SS-10 3.2 2 +0.075 2.35 -0.05 OP 9.5 10.2 2.9 6.4 2.5 6.4 2.50.07 dia. 1.6 Model 2.35 +0.075 -0.05 dia. holes 3.2 6.4 8.8 7.3 5.1 9.50.1 19.8 SS-01-E SS-01-F SS-5-F Three, 1.6 dia. SS-01 SS-5 SS-10 OF max. 0.25 N {25 gf} 0.49 N {50 gf} 1.47 N {150 gf} 1.47 N {150 gf} RF min. 0.02 N {2 gf} 0.04 N {4 gf} 0.25 N {25 gf} 0.25 N {25 gf} PT max. 0.5 mm 0.5 mm 0.5 mm 0.6 mm OT min. 0.5 mm 0.5 mm 0.5 mm 0.4 mm MD max. 0.1 mm 0.1 mm 0.1 mm 0.12 mm OP 8.40.5 mm Hinge Lever t = 0.3 (see note 1) SS-01GL(-E, -F) SS-5GL(-F) SS-10GL 14.5 (see note 2) +0.075 OP 2.35 -0.05 2.9 FP 9.5 10.2 2.5 6.4 +0.075 2.35 -0.05 2.50.07 dia. 1.6 Note: 4 8.8 7.3 5.1 9.50.1 19.8 dia. holes 3.2 6.4 Three, 1.6 dia. 1. Stainless-steel lever 2. Besides the SS-jGL models with a hinge lever length of 14.5, the SS-jGL11 models with a hinge lever length of 18.5, the SS-jGL111 models with a hinge lever length of 22.6, and the SS-jGL1111 models with a hinge lever length of 37.8 are available. Contact your OMRON representative for these models Model SS-01GL-E SS-01GL-F SS-5GL-F SS-01GL SS-5GL SS-10GL OF max. 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} 0.49 N {50 gf} RF min. 0.01 N {1 gf} 0.02 N {2 gf} 0.06 N {6 gf} 0.06 N {6 gf} OT min. 1.2 mm 1.2 mm 1.2 mm 1.0 mm MD max. 0.8 mm 0.8 mm 0.8 mm 1.0 mm FP max. 13.6 mm OP 8.80.8 mm 119 SS SS Simulated Hinge Lever 15.8 t = 0.3 (see note) SS-01GL13(-E, -F) SS-5GL13(-F) SS-10GL13 1.3R 4 OP +0.075 2.35 -0.05 FP 9.5 10.2 2.5 2.9 6.4 2.35 +0.075 -0.05 dia. holes 2.50.07 dia. 1.6 8.8 Three, 1.6 dia. 3.2 6.4 7.3 Note: Stainless-steel spring lever 5.1 9.50.1 19.8 Model SS-01GL13-E SS-01GL13-F SS-5GL13-F SS-01GL13 SS-5GL13 SS-10GL13 OF max. 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} 0.49 N {50 gf} RF min. 0.01 N {1 gf} 0.02 N {2 gf} 0.06 N {6 gf} 0.06 N {6 gf} OT min. 1.2 mm 1.2 mm 1.2 mm 1.0 mm MD max. 0.8 mm 0.8 mm 0.8 mm 1.0 mm FP max. 15.5 mm OP 10.70.8 mm Hinge Roller Lever 4.8 dia. x 3.2 (see note 2) 14.5 SS-01GL2(-E, -F) SS-5GL2(-F) SS-10GL2 t = 0.3 (see note 1) OP FP +0.075 2.35 -0.05 dia. 2.9 9.5 10.2 2.5 6.4 2.50.07 dia. 1.6 +0.075 2.35 -0.05 dia. holes 8.8 7.3 3.2 6.4 Three, 1.6 dia. Note: 5.1 9.50.1 19.8 Model SS-01GL2-E SS-01GL2-F SS-5GL2-F 1. Stainless-steel spring lever 2. Polyacetal resin roller SS-01GL2 SS-5GL2 SS-10GL2 OF max. 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} 0.49 N {50 gf} RF min. 0.01 N {1 gf} 0.02 N {2 gf} 0.06 N {6 gf} 0.06 N {6 gf} OT min. 1.2 mm 1.2 mm 1.2 mm 1.0 mm MD max. 0.8 mm 0.8 mm 0.8 mm 1.0 mm FP max. 19.3 mm OP 14.50.8 mm Separators (Insulation Sheet) Applicable Switch SS, D2S, S, D2SW S Thickness (mm) Model (see note) 0.18 Separator for SS0.18 0.4 Separator for SS0.4 Separator for SSj Separator 120 SS SS Precautions Terminal Connection Mounting Use two M2.3 mounting screws with spring washers to mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N S m {2.3 to 2.6 kgf S cm}. Mounting Holes Two, 2.4-dia. mounting holes or M2.3 screw holes 9.5 0.1 PCB Mounting Dimensions (Reference) When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. To solder the lead to the terminal, apply a soldering iron rated at 60 W max. (temperature of soldering iron: 250C to 300C) within 5 seconds. During soldering and one minute after soldering, do not apply any external force to the soldered terminal. Feed solder away from the switch case so that solder or flux will not flow into the case side. If the PCB terminal models are soldered in the solder bath, flux will permeate inside the Switch and cause contact failure. Therefore, manually solder the PCB terminal. Specifications Approved by TUV Rheinland According to EN61058-1 Model 5.25 9.50.1 3.25 Conductor size SS-5 0.5 to 0.75 mm2 SS-10 0.75 mm2 Solder Terminal Approved Conditions Three, 1.35 to 1.5 dia. Soldering iron can be used. Soldering hook hole available. Soldering terminal types 1 and 2 are met. (1.6) Spacing 8.8 +0.15 -0.05 16.10.1 Correct Use Refer to pages 22 to 29 for common precautions. The minimum thickness of insulation according to IEC61058-1 is 1.1 mm, and the minimum clearance between live terminals and mounting plate is 1.6 mm. If the proper insulation for the terminator cannot be obtained, add insulation such as a Separator or insulation guard on the switch. Connector Refer to Terminal Connectors on page 214. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. B032-E1-11A 121