SS SS
117
Characteristics
Operating
speed
0.1 mm to 1 m/s (pin plunger models)
Operating frequency
Mechanical:
400 operations/min
Electrical:
60 operations/min
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Contact resistance
(initial value)
OF 1.47 N {150 gf}:
SS-01 models:
50 m
Ω
max.
SS-5, SS-10 models:
30 m
Ω
max.
OF 0.49 N {50 gf}:
SS-01 models:
100 m
Ω
max.
SS-5 models:
50 m
Ω
max.
OF 0.25 N {25 gf}:
SS-01 models:
150 m
Ω
max.
Dielectric strength
1,000 V
AC (600 V
AC for SS-01 models), 50/60 Hz for 1 min between terminals of the same polarities
1,500 V
AC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each
terminal and non-current-carrying metal part (see note 1)
V
ibration resistance
(see note 2)
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Destruction:
OF 1.47 N {150 gf}:
1,000 m/s
2
{approx. 100G} max.
OF 0.25 N {25gf}/0.49 N {50 gf}:
500 m/s
2
{approx. 50G} max.
Malfunction:
OF 1.47 N {150 gf}:
300 m/s
2
{approx. 30G} max.
OF 0.25 N {25 gf}/0.49 N {50 gf}:
200 m/s
2
{approx. 20G} max.
Note:
Lever-type model: T
otal travel position (with a contact separation time of 1 ms max.)
Life expectancy
Mechanical:
30,000,000 operations min. (Refer to the following
Engineering Data
.)
10,000,000 operations min. for SS-10 models
Electrical:
200,000 operations min. (Refer to the following
Engineering Data
.)
50,000 operations min. for SS-10 models
Degree of protection
IP00
Degree of protection
against electrical shock
Class 1
Proof T
racking Index (PTI)
175
Switch category
D (IEC 335-1)
Ambient temperature
Operating: –25
°
C to 85
°
C (at ambient humidity of 60% max.) (with no icing)
Ambient humidity
Operating: 85% max. (for 5
°
C to 35
°C)
Weight
Approx. 1.6 g (pin plunger models)
Note: 1.
The dielectric strength shown in the table indicates a value for models with a Separator
.
2. For
the pin plunger models, the above values apply for use at both the free
position and total travel position. For the lever models,
they
apply at the total travel position.
Approved Standards
UL1054 (File No. E41515)
CSA C22.2 No. 55 (File No. LR21642)
Rated
voltage
SS-10 SS-5 SS-01
125 V
AC ---
5 A
0.1 A
250 V
AC
10.1 A
3 A
---
30 VDC --- ---
0.1 A
120 V
AC (TV) ---
2 A
---
VDE0630 (File No. 6131ÜG)
SEMKO (File No. 9812216/01), (File No. 8916091)
Rated
voltage
SS-10 SS-5
250 V
AC
10 A
5 A
SEV (File No. 93. 5. 51936. 01)
Rated
voltage
SS-5
250 V
AC
5 A
EN61058-1 (IEC601058-1)
(TÜV Rheinland, File No. J9451450)
Rated
voltage SS-10 SS-5 SS-01
250
V
AC
10 A
5 A
5 (1) A motor
3 A (see note 2)
---
125 V
AC --- ---
0.1 A
(see note 2)
30 VDC ---
5 A (see note 2)
0.1 A
(see note 2)
Note: 1. Testing conditions: 50,000 operations, T85 (0°C to
85°C)
2. These
approvals are only limited to
OF 1.47 N {150 gf}
models.