4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040QBC/D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zSingle color. The Blue source color devices are made with InGaN Light zSuitable for all SMT assembly and solder process. Emitting Diode. zAvailable on tape and reel. Static electricity and surge damage the LEDS. zIdeal for backlighting. It is recommended to use a wrist band or anti-electrostatic zPackage : 500pcs / reel. glove when handling the LEDs. zMoisture sensitivity level : level 4. All devices, equipment and machinery must be electrically zRoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC4567 REV NO: V.8 DATE: OCT/28/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201004468 Selection Guide Part No. Dice AA4040QBC/D Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 70 150 90 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peal value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC4567 REV NO: V.8 DATE: OCT/28/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201004468 Blue AA4040QBC/D SPEC NO: DSAC4567 REV NO: V.8 DATE: OCT/28/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201004468 AA4040QBC/D Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAC4567 REV NO: V.8 DATE: OCT/28/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201004468 PACKING & LABEL SPECIFICATIONS AA4040QBC/D SPEC NO: DSAC4567 REV NO: V.8 DATE: OCT/28/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201004468